I need this as soon as possible to solve it or at least to find out what is the problem.
I have configured IPSec tunnels with Openswan and Cisco ASA, i have established a connection and the ping was fine, but after some time there is request time out from both sites. I don't have ASA access but its default IPSec configuration,this is the openswan conf parameters.
I have found this in the "/var/log/seccure" logs
Also i like to put some more logging/debuging so i can have more info but can't find any good example or doc. on how to.
And i have the following doc. on Phase 1 and 2
Any solution or hints or some parameters that I'm missing ?
Please use code tags next time for your code and data, not QUOTE Thanks
Hi,I want connect my ASA 5510 firewall to a 3750 switch with RIP routing. Unfortunately,I am having issues passing the VPN subnet through rip to the 3750.I don't understand how the routing table is populated on the ASA. Any suggestions? (0 Replies)
I have installed Openswan and configured IPSec and works perfect, but for some unknown reasons it stop working. I see that the tunnels are up and established. The route to the destination are added. Everything by the book seems to be ok. But somehow when i start to ping the other side (... (4 Replies)
Is there an easy way to stack Cisco 2960-S and Cisco 2960X switches? If you have no idea, follow this:
1. Stacking is not supported on switches running the LAN Lite image. All switches in the stack must be running the LAN Base image.
2. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S... (0 Replies)
I am trying to establish vpn between my linux server and cisco asa at client side.
I installed openswan on my cent os.
eth0 - 22.214.171.124
Gateway - 126.96.36.199
eth1 - 188.8.131.52
I have simple IPtables Like
LAN="eth1" (0 Replies)