Openswan with Cisco ASA


Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
Special Forums IP Networking Openswan with Cisco ASA
# 1  
Openswan with Cisco ASA

Hi all,
I need this as soon as possible to solve it or at least to find out what is the problem.

I have configured IPSec tunnels with Openswan and Cisco ASA, i have established a connection and the ping was fine, but after some time there is request time out from both sites. I don't have ASA access but its default IPSec configuration,this is the openswan conf parameters.

Code:
#Define your IKE policy
            authby=secret
            keyingtries=0
            pfs=no
            ike=3des-sha1;modp1024
            ikelifetime="28800"
    
            dpddelay=0
            dpdtimeout=0
            dpdaction=clear
    
    #Define IPSec Policy
    
            phase2=esp
            phase2alg=3des-sha1
            ikev2=no
            keyexchange=ike
            rekey=no
            forceencaps=no
            keylife="28800"

I have found this in the "/var/log/seccure" logs
Code:
    received Delete SA(0x937bbc29) payload: deleting IPSEC State #5
    received and ignored informational message
    received Delete SA(0x55f62168) payload: deleting IPSEC State #8
    received and ignored informational message



Also i like to put some more logging/debuging so i can have more info but can't find any good example or doc. on how to.

And i have the following doc. on Phase 1 and 2

Code:
Encryption Algorithm     3DES
    Hash Algorithm           SHA1
    Authentication method    Preshare
    Diffie Hellman Group     Group 2
    Lifetime (Key)           28800
    Use NAT traversal        No
    Use PFS                  No
    Encapsulation            ESP
    Encryption Algorithm     3DES
    Hash Algorithm           SHA1
    Lifetime (Key)           28800


Any solution or hints or some parameters that I'm missing ?
Moderator's Comments:
Mod Comment Please use code tags next time for your code and data, not QUOTE Thanks
Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #794
Difficulty: Medium
1/10 has a finite binary representation.
True or False?

4 More Discussions You Might Find Interesting

1. IP Networking

Cisco 3750 Switch ASA VPN Routing

Hi,I want connect my ASA 5510 firewall to a 3750 switch with RIP routing. Unfortunately,I am having issues passing the VPN subnet through rip to the 3750.I don't understand how the routing table is populated on the ASA. Any suggestions? (0 Replies)
Discussion started by: Ayaerlee
0 Replies

2. IP Networking

VPN IPSec Openswan

Hi all, I have installed Openswan and configured IPSec and works perfect, but for some unknown reasons it stop working. I see that the tunnels are up and established. The route to the destination are added. Everything by the book seems to be ok. But somehow when i start to ping the other side (... (4 Replies)
Discussion started by: ivancd
4 Replies

3. IP Networking

How to stack Cisco 2960-S and Cisco 2960X?

Is there an easy way to stack Cisco 2960-S and Cisco 2960X switches? If you have no idea, follow this: 1. Stacking is not supported on switches running the LAN Lite image. All switches in the stack must be running the LAN Base image. 2. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S... (0 Replies)
Discussion started by: Ayaerlee
0 Replies

4. IP Networking

How to establish site to site vpn - Linux machine and cisco asa?

Hi, I am trying to establish vpn between my linux server and cisco asa at client side. I installed openswan on my cent os. Linux Server eth0 - 182.2.29.10 Gateway - 182.2.29.1 eth1 - 192.9.200.75 I have simple IPtables Like WAN="eth0" LAN="eth1" (0 Replies)
Discussion started by: ashokvpp
0 Replies

Featured Tech Videos