Routing traffic problem between 3G and Office Lan Network
Hi,
I would like to ask some networking solution regarding my work LAN and 3G usb network problem. I want to route my internet traffic to the 3G network and sometimes connect to some of my work network for ssh to configure some workstation or print something. Currently my problem is i can't connect to the office network if i used internet using the 3G network setting the default gateway 10.64.64.64, all internal LAN connection lost(ping, telnet ssh, ftp etc). Even if i set the default gateway to the LAN as long as 3G network is available or connected
Here are some of the steps i taken and unsuccesful:
1. Only 3G or LAN:
3G Only with internet connection
LAN only with ping/office connection
2. Connected/plug 3G and LAN
with internet no lan connection
No internet no lan connection
My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I... (15 Replies)
Hi guys
I need to setup server/router in my firm. We got from our ISP dedicated server in their data center. It has a static IP and it servers as replacement for out DSL connection. I configured our internal server to be border gateway and to connects to data center. "Remote" admin installed... (0 Replies)
Solaris-9 server is having one primary IP 10.41.161.14 on qfe0 and 10.41.116.0 on qfe3:1. Traffic is going through virtual interface instead of physical interface. How should I force traffic to go with primary interface.
root@smtsrvn01:/# netstat -nr
Routing Table: IPv4
Destination ... (2 Replies)
hi guys
suse 11 SP1 x64
I have a server (4 NIC ports 192.168.100.100-103) that connects point to point to a storage device (same thing 4 ports 192.168.110.100-113) but this server connects to normal LAN 10.6.100.x - gateway 10.6.100.1
the issue is when testing connectivity to the storage... (7 Replies)
Network map:
WAN external interface 192.0.0.0 network
|
WAN internal interface 192.0.3.0 network
|
192.0.3.0 LAN
|
wireless router 192.0.3.1
|
DSL modem 192.0.3.2
The problem I am having is that some traffic from the 192.0.3.0 LAN seems to be "leaking" onto the 192.0.0.0 WAN. I... (0 Replies)
We are working in the office where about 5-6 machines have Internet access. We pay for each GB of traffic we consume and that's quite expensive. Almost no worker download files. Just surfing websites (including our corporate one that is located outside of local network thus we pay for accessing it... (5 Replies)
Hello. I am not sure where to post this and would appreciate any moderator help in moving this to the area where it is most applicable. Thank you.
I've posted these questions in a couple different forums, but have not received any answers about what I am doing wrong. I would appreciate any... (3 Replies)
We have just moved offices and in the same week recieved a SUN box from another company site.
I'm attemting to connect this SUN box to the network, but i can't see it on the network.
I have modified the /etc/host file with the IP i want to attribute to the box, rebooted, but still nothing.... (1 Reply)
I am running Mandrake 8.0 (KDE ver 2.1.1) on a machine with 2 NICs. This is a college project. I am attempting to configure this machine as a firewall, and to pass packets from one network to another. Eth0 is on my external network. Eth1 is on my internal network. I set the gateway in "netconf"... (1 Reply)
Here's the problem. I got one network with a internett connection (2mbit). In this network there's 5 computers connected together with a hub. The other network is also with 5 computers. I'm just wondering if I could connect these networks together. But the one network should not get access to the... (1 Reply)