Visit The New, Modern Unix Linux Community


Open Suse Router


 
Thread Tools Search this Thread
Special Forums IP Networking Open Suse Router
# 1  
Data Open Suse Router

Hello I am having some issues doing to routing I have 4 network cards and one is connected to a linksys router with everything turned off to give us a static ip to use for the gateway out to the internet.

Hear is what we have

We have
eth2 with ip address of 192.168.1.2 / sub 255.255.255.0 <----Our gateway to internet
eth3 with ip address of 10.85.0.1 sub 255.255.224.0
eth0 with ip address of 10.85.32.1 sub 255.255.224.0
eth1 with ip address of 10.85.64.1 sub 255.255.224.0

We want all traffic to go out though eth2 to be able to get online

we have tried some static routes but never fully got them to work.
we are able to get it to hit the 192.168.1.2 but not the ip of the linksys of 192.168.1.1

We had this working once with windows with 3 nic and having our layer 3 switch with 3 vlans have the linksys plugged into the default vlan but we could not really browes the internet good with it vary slow that way I am trying to have the linksys plugged into the layer 3 switch at all.

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #975
Difficulty: Easy
In July 2009, Alan Cox quit his Linux kernel development role as the TTY layer maintainer after disagreement with Linus Torvalds about who should pay for beers during a trip to Amsterdam.
True or False?

5 More Discussions You Might Find Interesting

1. SuSE

g++ build on SUSE 12.1, cannot open included file

Hello, I have a project that I have compiled on a number of linux systems including CentOS, Ubuntu, and Windows Cygwin. I am trying to build the project under SUSE 12.1. The make file runs allot of the way through, but then throws an error that an included file can't be opened. This is the... (4 Replies)
Discussion started by: LMHmedchem
4 Replies

2. IP Networking

My router has UPnP, as do its work with ubuntu to automatically open ports

My router has UPnP,how to make it work with ubuntu to automatically open ports I try to open the following command " /sbin/iptables -I INPUT -d 0/0 -s 0/0 -p tcp --dport 21 -j ACCEPT" ,local only opens ,if i put the ip 192.168.1.68, it works correctly, if i`m put my external ip does not work,I... (9 Replies)
Discussion started by: dhalus
9 Replies

3. UNIX for Dummies Questions & Answers

Remote Unix printing to my WinXP works with no router. How can I make it work through my router?

I set up remote printing on a clients Unix server to my Windows XP USB printer. My USB printer is connected directly to my PC (no print server and no network input on printer). With my Win XP PC connected to my cable modem (without the router), i can do lp -dhp842c /etc/hosts and it prints. I... (7 Replies)
Discussion started by: jmhohne
7 Replies

4. SuSE

open SUSE 11.0 and its printer configuration

Does anybody who uses open SUSE 11.0? I have used open SUSE 10.2 for about 18 months. Today I installed open SUSE 11.0 The printer does not work. I tried all the tricks tweak it. My printer is an old one. It is HP Deskjet 5600 series. It works fine. I did the configuration using... (0 Replies)
Discussion started by: Angelo
0 Replies

5. Programming

Open Suse 10 seg fault

Okay, so here is some code that when compiled on Fedora Core 6 works great, but when I compile and run it on OpenSuse 10 it gives back a seg fault when trying to join the 2nd thead. #include <pthread.h> #include <stdio.h> int print_message_function( void *ptr ); int x = 1; main() { ... (1 Reply)
Discussion started by: chrisdrobison
1 Replies
in.rdisc(1M)						  System Administration Commands					      in.rdisc(1M)

NAME
in.rdisc, rdisc - network router discovery daemon SYNOPSIS
/usr/sbin/in.rdisc [-a] [-f] [-s] [send-address] [receive-address] /usr/sbin/in.rdisc -r [-p preference] [-T interval] [send-address] [receive-address] DESCRIPTION
in.rdisc remains part of the software distribution of the Solaris Operating Environment. It is, however, not used by default. in.routed(1M) includes the functionality provided by in.rdisc. See routeadm(1M) for details of how to specify the IPV4 routing daemon. in.rdisc implements the ICMP router discovery protocol. The first form of the command is used on hosts and the second form is used on routers. in.rdisc can be invoked in either the first form (host mode) or second form (router mode). On a host, in.rdisc populates the network routing tables with default routes. On a router, advertises the router to all the hosts. Host (First Form) On a host, in.rdisc listens on the ALL_HOSTS (224.0.0.1) multicast address for ROUTER_ADVERTISE messages from routers. The received mes- sages are handled by first ignoring those listed router addresses with which the host does not share a network. Among the remaining addresses, the ones with the highest preference are selected as default routers and a default route is entered in the kernel routing table for each one of them. Optionally, in.rdisc can avoid waiting for routers to announce themselves by sending out a few ROUTER_SOLICITATION messages to the ALL_ROUTERS (224.0.0.2) multicast address when it is started. A timer is associated with each router address. The address will no longer be considered for inclusion in the routing tables if the timer expires before a new advertise message is received from the router. The address will also be excluded from consideration if the host receives an advertise message with the preference being maximally negative or with a lifetime of zero. Router (Second Form) When in.rdisc is started on a router, it uses the SIOCGIFCONF ioctl(2) to find the interfaces configured into the system and it starts lis- tening on the ALL_ROUTERS multicast address on all the interfaces that support multicast. It sends out advertise messages to the ALL_HOSTS multicast address advertising all its IP addresses. A few initial advertise messages are sent out during the first 30 seconds and after that it will transmit advertise messages approximately every 600 seconds. When in.rdisc receives a solicitation message, it sends an advertise message to the host that sent the solicitation message. When in.rdisc is terminated by a signal, it sends out an advertise message with the preference being maximally negative. OPTIONS
-a Accept all routers independent of the preference they have in their advertise messages. Normally, in.rdisc only accepts (and enters in the kernel routing tables) the router or routers with the highest preference. -f Run in.rdisc forever even if no routers are found. Normally, in.rdisc gives up if it has not received any advertise message after soliciting three times, in which case it exits with a non-zero exit code. If -f is not specified in the first form then -s must be specified. -r Act as a router, rather than a host. -s Send three solicitation messages initially to quickly discover the routers when the system is booted. When -s is specified, in.rdisc exits with a non-zero exit code if it can not find any routers. This can be overridden with the -f option. -p preference Set the preference transmitted in the solicitation messages. The default is zero. -T interval Set the interval between transmitting the advertise messages. The default time is 600 seconds. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWroute | +-----------------------------+-----------------------------+ SEE ALSO
in.routed(1M), routeadm(1M), ioctl(2), gateways(4), attributes(5), icmp(7P), inet(7P) Deering, S.E., editor, ICMP Router Discovery Messages, RFC 1256, Network Information Center, SRI International, Menlo Park, California, September 1991. SunOS 5.10 5 Nov 2004 in.rdisc(1M)

Featured Tech Videos