9 More Discussions You Might Find Interesting
1. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
2. AIX
All
I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
$ lsnports
name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies
3. AIX
Thanks I need to know if my server has dual HBA and if multipath has been configured. For Multipath I ran lspath and it shows all drives and if MPIO is configured for that drive.
Thanks for any input. (2 Replies)
Discussion started by: 300zxmuro
2 Replies
4. Solaris
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
5. Solaris
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Discussion started by: girish.batra
6 Replies
6. Solaris
I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install?
Thanks in advance.... (23 Replies)
Discussion started by: Y4Net
23 Replies
7. AIX
OS: AIX 6.1
The host has a dual port NIC installed and when I went to run `cfgmgr -v` to configure it I got an error showing device packages are missing from the install:
`cfgmgr -v` on 10.15.xx.xxx
cfgmgr: 0514-621 WARNING: The following device packages are required for device support but... (3 Replies)
Discussion started by: b1f30
3 Replies
8. Shell Programming and Scripting
I have log file whose size is 4 GB , i would like to split it to 1 gb each ,Can any one tell me the syntax of csplit comand for that.
I am using Sun0S 5.8 (3 Replies)
Discussion started by: jambesh
3 Replies
9. AIX
Hi,
It's my first time I will use a 4BG fiber with two ports on one card. I used only one port 2GB before.
What will be the drivers I need to install on my AIX5.3? Is the two ports going to be just one line? Or I can use the other ports on another connection.
Thanks in advance,
itik (1 Reply)
Discussion started by: itik
1 Replies
HBA_GetBindingCapability(3HBAAPI) Common Fibre Channel HBA Information Library Functions HBA_GetBindingCapability(3HBAAPI)
NAME
HBA_GetBindingCapability, HBA_GetBindingSupport, HBA_SetBindingSupport - return and sets binding capabilities on an HBA port
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
HBA_HANDLE HBA_GetBindingCapability(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY *pFlags);
HBA_STATUS HBA_GetBindingSupport(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY *pFlags);
void HBA_SetBindingSupport(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY Flags);
PARAMETERS
handle an open handle returned from HBA_OpenAdapter(3HBAAPI)
hbaPortWWN the Port WWN of the local HBA through which the binding capabilities implemented by the HBA is returned
pFlags a pointer to an HBA_BIND_CAPABILITY structure that returns the persistent binding capabilites implemented by the HBA
Flags an HBA_BIND_CAPABILITY structure containing the persistent binding capabilites to enable for the HBA
DESCRIPTION
The HBA_GetBindingCapability() function returns the binding capabilities implemented by the HBA.
The HBA_GetBindingSupport() function returns the currently enabled binding capabilities for the HBA.
The HBA_SetBindingSupport() function sets the currently enabled binding capabilites for the HBA to a subset of the binding capabilities
implemented by the HBA.
RETURN VALUES
The HBA_GetBindingCapability() and HBA_GetBindingSupport() functions return the following values:
HBA_STATUS_OK
Persistent binding capabilites have been returned.
HBA_STATUS_ERROR_ILLEGAL_WWN
Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle.
HBA_STATUS_ERROR_NOT_SUPPORTED
The HBA handle specified by handle does not support persistent binding.
HBA_STATUS_ERROR
An error occurred. The value of pFlags remains unchanged and points to the persistent binding capabilites.
The HBA_SetBindingSupport() function returns:
HBA_STATUS_OK
Persistent binding capabilites have been enabled.
HBA_STATUS_ERROR_ILLEGAL_WWN
Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle.
HBA_STATUS_ERROR_NOT_SUPPORTED
The HBA handle specified by handle does not support persistent binding.
HBA_STATUS_ERROR_INCAPABLE
The flags argument contains a capability not implemented by the HBA.
HBA_STATUS_ERROR
An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API |
| |version 1) |
+-----------------------------+-----------------------------+
| |Standard: FC-HBA Version 4 |
| |(API version 2) |
+-----------------------------+-----------------------------+
|MT-Level |Safe |
+-----------------------------+-----------------------------+
SEE ALSO
libhbaapi(3LIB), attributes(5)
T11 FC-MI Specification
SunOS 5.10 1 Sep 2003 HBA_GetBindingCapability(3HBAAPI)