10 More Discussions You Might Find Interesting
I own a 1999 vintage HP Logic Analyzer that runs HPUX 10.20. It is a 9000/775/rock system similar to a Visualize C132L/160L system.
I'm attempting, mostly for the fun of it, to upgrade the existing slow 5MB/s-only SCSI system, with a new-er PCI card. Of course drivers is my major concern. I'd... (2 Replies)
Discussion started by: KeithM
OK group, it's been 12 years since I worked with SCO. I need some direction here:
SCO Openserver 5.07
I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
Discussion started by: jscholz
PCI-X was popular years ago, now it's not. Today's motherboards have PCIe slots, not PCI-X slots. I'm accustomed to using Adaptec, but I believe they've been bought out by ATTO Technology. Now ATTO has a product called PCI UL50 Dual Channel VHDCI Ultra320 SCSI PCIe card. So: does the SCO UNIX... (7 Replies)
Discussion started by: Transpower
I am at a loss with a VIO server running ios 22.214.171.124-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
name physloc ... (4 Replies)
Discussion started by: johnf
I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin.
There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC'
Do we need to set any jumpers before turning it on?
We already had... (0 Replies)
Discussion started by: orange47
I'm floundering here trying to locate a PCI-E 1x HBA that will support an external tape drive in SCO Openserver 6. I was unable to find anything that would work in the compatible hardware list and a call to Adaptec confirmed that PCI-X would've been a better option for the risers in the Dell 2950... (1 Reply)
Discussion started by: s_mal
I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible?
For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
Discussion started by: kwliew999
Okay. I admit I'm sort of a newbie in this regard.
I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing.
... (3 Replies)
Discussion started by: Plain Person
Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy.
I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this... (4 Replies)
Discussion started by: Plain Person
10. UNIX for Dummies Questions & Answers
Can anyone out there help me out? I'm trying to install a scsi tape back up on a sys running sco openserver 5.0.4. When I go through the steps for mkdev tape it seems like it works, but when I reboot I still don't see the tape. Also when it boots up I get a scsi bios not installed error. I've... (1 Reply)
Discussion started by: goatboy_tx
UK(4) BSD Kernel Interfaces Manual UK(4)
uk -- SCSI user-level driver
uk* at scsibus? target ? lun ?
The uk driver provides support for a process to address devices on the SCSI bus for which there is no configured driver.
A SCSI adapter must also be separately configured into the system before this driver makes sense.
If a count is given, that number of uk devices will be configured into the NetBSD kernel.
The uk driver has no ioctls of its own but rather acts as a medium for the generic scsi(4) ioctls. These are described in <sys/scsiio.h>.
/dev/uk[0-255] unknown SCSI devices.
All scsi(4) debug ioctls work on uk devices.
ioctl(2), cd(4), ch(4), scsi(4), sd(4), ss(4), st(4)
The uk driver appeared in 386BSD 0.1.
October 11, 1993 BSD