Login or Register to Ask a Question and Join Our Community


HP-UX

Need to make disk device files match

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems HP-UX Need to make disk device files match
# 1  
Old 06-01-2006
Question Need to make disk device files match
Hi,

I was wondering if there was a way to change the disk device files ex. /dev/dsk/cxtxd0 ?

What I have are two HPUX 11.0 servers using MC Service Guard 11.13. A consultant attached a SAN and both servers had created the same identical LUN device files. Now I could begin creating my volume group , lvol, etc. Well, somewhere down the road, before I could config my volume groups, messed up the fiber that was connected to the SAN on one of the servers. After they changed the fiber, I a reconnected, now the HA1 server has different device file numbers then the HA2 server.

Now I know I could just do a vgexport and vgimport and modify the map files etc. but I heard there was a way to change the device files so they would match on both servers. Anyone have any idea?

Thanks,
Mike
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Linux

0: Failure: (138) Device does not have a disk-config

Hi guys, Any idea why I am getting the below error ? # drbdsetup disk-options 0 --resync-rate=500M 0: Failure: (138) Device does not have a disk-config Some info is; # fdisk -l Disk /dev/sda: 64.4 GB, 64424509440 bytes 64 heads, 32 sectors/track, 61440 cylinders Units =... (0 Replies)
Discussion started by: Junaid Subhani
0 Replies

2. AIX

Command to check the busy % for a hard disk device like hdisk5

Please help with command to check the busy % for a hard disk device like hdisk5 Best regards, Vishal (7 Replies)
Discussion started by: Vishal_dba
7 Replies

3. Solaris

Cleanup special files create via device match in a whole root zone

I added in the configuration file of a whole root zone the following device match entries: <device match="/dev/rmt/*"/> <device match="/dev/sg/*"/> after the reboot the zone was able to see all the devices of its global zone, and let under /dev/rmt and /dev/sg the special files created with... (1 Reply)
Discussion started by: hugo_perez
1 Replies

4. Shell Programming and Scripting

File representing the hard disk storage device

I want example of a file representing the hard disk storage device In UNIX ? (6 Replies)
Discussion started by: tamer11007
6 Replies

5. Solaris

Determine free space in a Disk device

Version: Solaris 10 (August 2011) on VM I am kind of new to Solaris.From VM workstation i allocated 35 GB to this Solaris VM's Disk The disk was named c1t0d0 Few basic slices for root(8gb), swap(517mb) and /export/home(494mb) were created by the solaris Installer during the... (18 Replies)
Discussion started by: polavan
18 Replies

6. Shell Programming and Scripting

Need help to grep for a title match and then make some queries after the match

Here is the sample of my file address.txt Address 1 1234 Drive way New Orleans, LA Zipcode :- 12345 Address 2 4567 Spring way Chicago, IL Zipcode :- 67890 I would like to grep for an Address title (Ex :- Address 2) , then get its zipcode and echo both in a single line. Ex :- ... (3 Replies)
Discussion started by: leo.maveriick
3 Replies

7. AIX

rmdev won't remove disk device AIX

Hi all, I'm attempting to remove some EMC hdisk devices which we recently had made available to one of our backup servers. This is an AIX 5.3 server. When I try doing an rmdev I get the following: root@********:/dev# rmdev -d -l hdisk495 Method error (/usr/lib/methods/ucfgdevice): ... (2 Replies)
Discussion started by: C.J.Hund
2 Replies

8. Shell Programming and Scripting

mapping device from an inq output to veritas disk groups

Hi, Does anyone have a clever way of mapping the following from two different files using perl. sample line from vxdisk list output (vxdisk-list.file): emcpower18s2 auto:sliced IDFAG1_1 (IDFAG1_appdg) online sample line from 'inq' output (inq.file): ... (0 Replies)
Discussion started by: csoesan
0 Replies

9. UNIX for Advanced & Expert Users

Swap Device & Unix Disk Buffer

Does anyone know if when the Swap Device / Page file in unix is carrying out Page / Swap In's and Page / Swap outs, does it go through the Unix Disk Cache ( I am presuming raw partitions are not being used ) ? Therefore if there is paging activity on a system ( measured by sar -p, sar -g and... (0 Replies)
Discussion started by: jimthompson
0 Replies

10. UNIX for Dummies Questions & Answers

available disk space on disk device???

Hello, Can someone please tell me which command to use to determine the available disk space on a given disk device? I have to write a shell script that compresses files and stores them in a specific location but I am not sure how "conservative" I should be? Thanks in advance! Al. (4 Replies)
Discussion started by: alan
4 Replies
Login or Register to Ask a Question

LEARN ABOUT MOJAVE

cmdk

cmdk(7D)							      Devices								  cmdk(7D)

NAME

       cmdk - common disk driver

SYNOPSIS

       cmdk@target, lun : [ partition | slice ]

DESCRIPTION

       The  cmdk  device  driver  is  a  common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable
       disks.

       The block-files access the disk using the system's normal buffering mechanism and are read and written  without	regard	to  physical  disk
       records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin-
       gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit-
       ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk.

       I/O  requests  to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL
       error.

       Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing  up  the
       entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area.

       Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program.

FILES

       /dev/dsk/cndn[s|p]n     block device (IDE)

       /dev/rdsk/cndn[s|p]n    raw device (IDE)

			       where:

			       cn	controller n

			       dn	lun n (0-7)

			       sn	UNIX system slice n (0-15)

			       pn	fdisk partition(0)

       /kernel/drv/cmdk        32-bit kernel module.

       /kernel/drv/amd64/cmdk  64-bit kernel module.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |x86			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I)

SunOS 5.10							    9 Oct 2004								  cmdk(7D)