Login or Register to Ask a Question and Join Our Community


HP-UX

PVS command in HP-UX

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems HP-UX PVS command in HP-UX
# 1  
Old 07-20-2015
PVS command in HP-UX
Dear Engineer,

Is there any command in HP-UX work similiar to PVS command in Linux?

With Best Regards,
Md. Abdullah-Al Kauser
# 2  
Old 07-20-2015
Similar would be pvdisplay

Regards
Peasant.
# 3  
Old 07-21-2015
Dear concern,

Actually i am looking for a command in hp-ux from where i can get pv and vg mapping like pvs command in Linux.

With Best Regards,
Md. Abdullah-Al Kauser
# 4  
Old 07-21-2015
It will output that (just not formatted as pvs) :

Code:
[root@host][root]>pvdisplay /dev/dsk/c1t0d0s2
--- Physical volumes ---
PV Name                     /dev/dsk/c1t0d0s2
VG Name                     /dev/vg00
PV Status                   available
Allocatable                 yes
VGDA                        2
Cur LV                      11
PE Size (Mbytes)            32
Total PE                    4345
Free PE                     491
Allocated PE                3854
Stale PE                    0
IO Timeout (Seconds)        default
Autoswitch                  On
Proactive Polling           On

This can be formated with a bit of awk magic do get the same display as linux pvs utility, if required.

Regards
Peasant.
# 5  
Old 07-21-2015
You can also do the reverse with vgdisplay -v vgname and the PVs are listed in the bottom section (after the overview and LV definitions)



Robin
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

Rebooting redundant VIOs and mirroring of PVs they serve to client LPARs

need to confirm: we have a system with two VIOs each serving a partition on a local disk to a client LPAR. That client LPAR has them both in a VG which is mirrored (exact). So each disk has a copy of the client LV that the client VG supports. This is the setup that was bequeathed to us by the... (3 Replies)
Discussion started by: maraixadm
3 Replies

2. Shell Programming and Scripting

Multiple command execution inside awk command during xml parsing

below is the output xml string from some other command and i will be parsing it using awk cat /tmp/alerts.xml <Alert id="10102" name="APP-DS-ds_ha-140018-componentFailure-S" alertDefinitionId="13982" resourceId="11427" ctime="1359453507621" fixed="false" reason="If Event/Log Level(ANY) and... (2 Replies)
Discussion started by: vivek d r
2 Replies

3. Shell Programming and Scripting

SH script, variable built command fails, but works at command line

I am working with a sh script on a solaris 9 zone (sol 10 host) that grabs information to build the configuration command line. the variables Build64, SSLopt, CONFIGopt, and CC are populated in the script. the script includes CC=`which gcc` CONFIGopt=' --prefix=/ --exec-prefix=/usr... (8 Replies)
Discussion started by: oly_r
8 Replies

4. UNIX for Dummies Questions & Answers

passing command output from one command to the next command in cshell

HI Guys, I hope you are well. I am trying to write a script that gets executed every time i open a shell (cshell). I have two questions about that 1) I need to enter these commands $ echo $DISPLAY $ setenv $DISPLAY output_of_echo_$display_command How can i write a... (2 Replies)
Discussion started by: kaaliakahn
2 Replies

5. UNIX for Advanced & Expert Users

unix command : how to insert text at the cursor location via command line?

Hi, Well my title isn't very clear I think. So to understand my goal: I have a script "test1" #!/bin/bash xvkbd -text blabla with xbindkeys, I bind F5 key in order it runs my test1 script So when I press F5, test1 runs. I'm under Emacs/Vi and I press F5 in order to have "blabla" be... (0 Replies)
Discussion started by: xib.be
0 Replies

6. Shell Programming and Scripting

Need help! command working ok when executed in command line, but fails when run inside a script!

Hi everyone, when executing this command in unix: echo "WM7 Fatal Alerts:", $(cat query1.txt) > a.csvIt works fine, but running this command in a shell script gives an error saying that there's a syntax error. here is content of my script: tdbsrvr$ vi hc.sh "hc.sh" 22 lines, 509... (4 Replies)
Discussion started by: 4dirk1
4 Replies

7. HP-UX

How to Mirror LV and umirror after to change PVs...

Greetings Im running HP UX B 11.11 and Im not sure on how to do this request to "mirror current 5 LVs on vgSPAN to the new LUNs assigned to the VG and unmirror the LVs and finally return the 12 LUNs to SAN storage" The existing LVs were extended to accommodate a user request to extend 2 FS on... (3 Replies)
Discussion started by: hedkandi
3 Replies

8. AIX

AIX:Command to get netaddress/subnet address command in IPv4/IP6

AIX:Command to get netaddress/subnet address command in IPv4/IP6 Can anybody help us with a command to retrieve netaddress/subnet address command in IPv4/IP6 on aix machine. net/subnet address is in the format 172.16.212.0(signifies all 255 machines in an IPv4 network) (2 Replies)
Discussion started by: rookie8278
2 Replies

9. Shell Programming and Scripting

assign a command line argument and a unix command to awk variables

Hi , I have a piece of code ...wherein I need to assign the following ... 1) A command line argument to a variable e.g origCount=ARGV 2) A unix command to a variable e.g result=`wc -l testFile.txt` in my awk shell script When I do this : print "origCount" origCount --> I get the... (0 Replies)
Discussion started by: sweta_doshi
0 Replies

10. SuSE

inconsistent ls command display at the command prompt & running as a cron job

Sir, I using the following commands in a file (part of a bigger script): #!/bin/bash cd /opt/oracle/bin ls -lt | tail -1 | awk '{print $6}' >> /tmp/ramb.out If I run this from the command prompt the result is: 2007-05-16 if I run it as a cron job then... (5 Replies)
Discussion started by: rajranibl
5 Replies
Login or Register to Ask a Question