Login or Register to Ask a Question and Join Our Community


HP-UX

Number of Disk Mirrored in HP-UX

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems HP-UX Number of Disk Mirrored in HP-UX
# 1  
Old 02-27-2004
Number of Disk Mirrored in HP-UX
In HP-UX 11.00
How can i check if there are disks mirrored
# 2  
Old 02-27-2004
If you are running HPUX 11i you probably are are using Veritas Volume management. I don't know what you have installed.

The veritas manaul is here:

http://docs.hp.com
# 3  
Old 02-27-2004
Use lvdisplay to view each logical volume. You can do this
from the command line or within SAM

For example:

# lvdisplay /dev/vg00/lvol1

LV Name /dev/vg00/lvol1
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 512
Current LE 64
Allocated PE 64
Stripes 0
Stripe Size (Kbytes) 0
Bad block off
Allocation strict/contiguous
IO Timeout (Seconds) default

The "Mirror copies" output tells you if the logical volume is
mirrored or not. In the above example it is not.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

Disk model number

Hi Please let me know how to check disk model number. I have already tried prtconf command but there is no such information related to model number. Regards, Scriptor (3 Replies)
Discussion started by: scriptor
3 Replies

2. Red Hat

Booting 2nd mirrored boot disk

Hi guys, thanks for helping out. If you have two boot disk mirrored and your primary boot disk fails, how will you boot the system from the second disk? Thank you very much for your assistance on this matter. Arrey (5 Replies)
Discussion started by: cjashu
5 Replies

3. Solaris

Need help replacing a mirrored boot disk

I have a v480 with a mirrored boot disk c1t0 and c1t1. The drives themselves don't show a failure but the mirror's need maintenance. This is my plan for replacing the drive. I would love feedback to point out what I"m missing or where my steps are incorrect. Two things I believe I'm... (3 Replies)
Discussion started by: pcoffey
3 Replies

4. Solaris

Boot from Mirrored disk

So I have mirrored disk already set up from c1t0d0 to c1t1d0. Is there some special procedures that I need to do before I do and then try to boot from the mirrored disk? I am using a V490 if that helps... (7 Replies)
Discussion started by: drew_1980
7 Replies

5. UNIX for Advanced & Expert Users

how to create multiple-boot system with disks mirrored(RAID1+0) and disk alone

I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0) windows server 2003 was installed on that disk. I will add a disk.(scsi 300GB) I will install Linux on that additional disk. I want to create multiple-boot system. Is it possible? I wanna know how to create... (0 Replies)
Discussion started by: lifegeek
0 Replies

6. UNIX for Dummies Questions & Answers

Number of Inode on a disk

How we can know number of inode present in my Disk including free and occupied. Is there any tool or program to know how much free inode are there in inode free list . (2 Replies)
Discussion started by: mr_deb
2 Replies

7. Solaris

Remove os mirrored disk Solaris 10

Hello once again seeking your help, I have a mirrored disk and need to unmirror it to mount it as a new file system (/export) but could not find the correct steps to do it with out affecting the original disk. can anybody point me out on how to get this done. Thanks!! (3 Replies)
Discussion started by: AQG
3 Replies

8. UNIX for Dummies Questions & Answers

Solaris 10 not booting with mirrored disk

Hi all, I have a V490 running with Solaris 10. The OS disk was mirrored. I wanted to break the mirror, boot with the secondary mirror, and re-mirror the OS with a new disk. This is what I did, detached the metadevices of the secondary mirror disk (disk 1) metaclear-ed the metadevices,... (1 Reply)
Discussion started by: nitinp82
1 Replies

9. UNIX for Dummies Questions & Answers

Creating create mirrored disk files systems using mkfs command

What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example: machine# mkfs -F ufs /dev/md/dsk/d40 size not specified ufs usage: mkfs special size(sectors) \ -m : dump fs cmd line used to make this partition -V : print this... (4 Replies)
Discussion started by: GLJ@USC
4 Replies

10. AIX

Mirrored disk.....

How do I know, which all disks are mirrored? any command? Bala (7 Replies)
Discussion started by: balaji_prk
7 Replies
Login or Register to Ask a Question