HP SAS Midline Drives

9 More Discussions You Might Find Interesting

1. Linux

My first SAS..a simple question.

I bought for backup this controller LSI LSI9212-4i4e 6G SAS I will buy a quantum reader like this Quantum TC-L62BN-EM 2500GB LTO Two simple question a)I read..2500GB,this mean i cannot use tape lto6 over 3tb? b)Wich external cable?A sata external cable is good? Thanks

2. UNIX for Dummies Questions & Answers

Regarding relation between SAS and HTML

How is sas related to web development - once we have the sas code executed what is the necessity to create a html output?? Any sas and html users welcome ..

3. UNIX for Dummies Questions & Answers

SAS Process Getting Killed

HI all, I am very new to AIX (matter of fact Unix). We are currently automating out manual process using Unix Shell Scripting. My wrote a shell script which will accept the name of the sas job as parameter, checks the existense of the sas file in the specified folder. If it is not present,...

4. UNIX Desktop Questions & Answers

SAS running audits

I'm not sure if anyone can help here. I don't know much about Unix but will give the information that I can. I am trying to run audits of my data with the command sas audit. When it asks for a batch number I put in the number that I am looking to print. When I do this I am getting the...

5. Solaris

SAS Setup

Hi, I have a solaris box with an LSI SAS HBA and a16 bay SAS JBOD. I can only see 15 of the 16 drives, ID 7 is not seen. Do I have to edit the st.conf file to get things to work properly? Thanks

6. UNIX for Advanced & Expert Users

SAS Tuning

Does anyone had perfomed a tuning with SAS on Solaris??? Performance is not so good and I found out that Share Memory an Semaphores are the same that initial instalation, I havent found info at internet Please help

7. Shell Programming and Scripting

how floppy disks, CDs and flash drives (pen drives) are accessed in UNIX

hi how floppy disks, CDs and flash drives (pen drives) are accessed in UNIX? thanks

8. Shell Programming and Scripting

Execute SAS Foreground

Hi, I am executing the SAS program using Unix script to call SAS program, but i would like to run that SAS program in forground mode, does anyone know what is command. Thanks in advance!!

9. Shell Programming and Scripting

Validating date in sas

I need some help on sas on unix.... Is there any way to validate date in sas

LEARN ABOUT OPENSOLARIS

mega_sas

mega_sas(7D)							      Devices							      mega_sas(7D)

NAME

       mega_sas - SCSI HBA driver for LSI MegaRAID SAS controller

DESCRIPTION

       The mega_sas MegaRAID controller host bus adapter driver  is a  SCSA-compliant  nexus  driver that supports the Dell PERC 5/E, 5/i, 6/E and
       6/i RAID controllers, the IBM ServeRAID-MR10k SAS/SATA  controller and  the  LSI  MegaRAID  SAS/SATA  8308ELP,  8344ELP,  84016E,  8408ELP,
       8480ELP, 8704ELP, 8704EM2, 8708ELP, 8708EM2, 8880EM2 and 8888ELP series of controllers.

       Supported  RAID	features  include RAID levels 0, 1, 5, and 6, RAID spans 10, 50 and 60, online capacity expansion (OCE), online RAID level
       migration (RLM), auto resume after loss of  system power during arrays, array rebuild or reconstruction (RLM) and configurable stripe  size
       up  to  1MB. Additional supported RAID features include check consistency for background data integrity, patrol read for media scanning and
       repairing, 64 logical drive support, up to 64TB LUN support, automatic rebuild and global and dedicated hot spare support.

CONFIGURATION

       The mega_sas.conf file contains no user configurable parameters. Please configure your hardware through the related  BIOS  utility  or  the
       MegaCli	configuration  utility.  If  you  want to install to a drive attached to a mega_sas HBA, you should create the virtual drive first
       from the BIOS before running the Solaris install. You can obtain the MegaCli utility from the LSI website.

       The mega_sas device can support up to  64 virtual disks. Note that BIOS numbers the virtual disks as 1 through 64, however in  the  Solaris
       operating  environment virtual disks are numbered from 0 to 63.	Also note that SAS and SATA drives cannot be configured into the same vir-
       tual disk.

KNOWN PROBLEMS AND LIMITATIONS

       The mega_sas driver does not support the LSI MegaRAID SAS 8204ELP, 8204XLP, 8208ELP, and 8208XLP controllers.

FILES

       /kernel/drv/mega_sas	     32-bit ELF kernel module. (x86)

       /kernel/drv/amd64/mega_sas    64-bit kernel   module. (x86)

       /kernel/drv/mega_sas.conf     Driver configuration file (contains no user-configurable options).

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |x86-based systems 	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWmegasas		   |
       +-----------------------------+-----------------------------+
       |Interface stability	     |Uncommitted		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       prtconf(1M), attributes(5), sata(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S),  scsi_device(9S),
       scsi_pkt(9S)

       Small Computer System Interface-2 (SCSI-2)

SunOS 5.11							    14 Aug 2008 						      mega_sas(7D)

HP Server News and Podcasts RSS