Today (Saturday) We will make some minor tuning adjustments to MySQL.

You may experience 2 up to 10 seconds "glitch time" when we restart MySQL. We expect to make these adjustments around 1AM Eastern Daylight Saving Time (EDT) US.


M5000 won't power up

Login or Register to Reply

 
Thread Tools Search this Thread
# 1  
M5000 won't power up

on an m5000 , I can not power it up, system failure.

Code:
XSCF> poweron -a
DomainIDs to power on:00,01
Continue? [y|n] :y
00 :Not powering on :Poweron canceled due to missing component.
01 :Not powering on :Poweron canceled due to missing component.


the only fault that I can see is:

Code:
 DDC_A#0 Status:Deconfigured;
*       DDC_A#1 Status:Deconfigured;
*       DDC_A#2 Status:Deconfigured;
*       DDC_A#3 Status:Deconfigured;
*       DDC_B#0 Status:Deconfigured;
*       DDC_B#1 Status:Faulted;
*   IOU#0 Status:Deconfigured;
*       DDC_A#0 Status:Deconfigured;
*       DDCR Status:Deconfigured;
*           DDC_B#0 Status:Deconfigured;
*   IOU#1 Status:Deconfigured;
*       DDC_A#0 Status:Deconfigured;
*       DDCR Status:Deconfigured;
*           DDC_B#0 Status:Deconfigured;


but I can not find a part number?

and the board give faulted?

Code:
XSCF> showboards -a
  
 XSB  DID(LSB) Assignment  Pwr  Conn Conf Test    Fault    
---- -------- ----------- ---- ---- ---- ------- -------- 
00-0 00(00)   Assigned    n    n    n    Passed  Faulted  
00-1 01(04)   Assigned    n    n    n    Passed  Faulted  
00-2 01(05)   Assigned    n    n    n    Passed  Faulted  
00-3 01(06)   Assigned    n    n    n    Passed  Faulted  
01-0 01(00)   Assigned    n    n    n    Passed  Faulted  
01-1 01(01)   Assigned    n    n    n    Passed  Faulted  
01-2 01(02)   Assigned    n    n    n    Passed  Faulted  
01-3 01(03)   Assigned    n    n    n    Passed  Faulted


do I need a new motherboard, or just the one piece that faulted?

Last edited by rbatte1; 06-19-2018 at 08:58 AM.. Reason: Added CODE tags for all output for clarity (and disabling the smilies)
# 2  
Do you have support for the M5000? I would say replacing the faulted part should be enough. You can also try to reset the fault and try again to powerup the system. But go slowly with a poweron -d 0 first and see what happens. If domain 0 is running, you can try to start domain 1.
# 3  
no support since its older. just a company that swaps parts. I did try the power on each domain and same result , did no reset fault, what command does that? I will try and find it.
# 4  
Sun shipped some mobo's in COD (Capacity on Demand) mode which means they won't work without a license. Have you got one of those? Do you know the machine history?

Search the web for:
"Capacity on Demand"
# 5  
Quote:
Originally Posted by goya
no support since its older. just a company that swaps parts. I did try the power on each domain and same result , did no reset fault, what command does that? I will try and find it.
From the XSCF use the command version -c xcp and send the output. Depending on the version you might not be able to reset the error...
Login or Register to Reply

|
Thread Tools Search this Thread
Search this Thread:
Advanced Search

More UNIX and Linux Forum Topics You Might Find Helpful
IBM Power 740 won't boot after firmware update
kevinedailey
A team member installed the wrong version of License Code on a Power 740 system used in our Development environment. The system will no longer boot. Does anyone have IBM documentation or experience to share on recovering a system that currently reports "Unsupported License Code version...... AIX
1
AIX
M5000 Xscf
rrodgers
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip. it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out. so my question is, any ideas of what I might...... IP Networking
4
IP Networking
M5000 Question
fugitive
Hi, I 've a fully loaded M5000 which i would like to partition in 4 domains but i have a concern that since we have only 4 internal disks how can we partition the box in for domains with 2 disks ( mirrored ) in each domain. Should i go ahead with 1 Lun from SAN and 1 internal disk for each of 4...... Solaris
3
Solaris
won't mount /usr...won't boot fully
bbird
Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD...... AIX
11
AIX

Featured Tech Videos