Today (Saturday) We will make some minor tuning adjustments to MySQL.

You may experience 2 up to 10 seconds "glitch time" when we restart MySQL. We expect to make these adjustments around 1AM Eastern Daylight Saving Time (EDT) US.


Multi-bit ECC Error on X4100 M2 Server Sun Fire


Login or Register to Reply

 
Thread Tools Search this Thread
# 1  
Error Multi-bit ECC Error on X4100 M2 Server Sun Fire

I have a problem,

I have been installing Redhat Interprise Linux on X4100 M2 Server, when system is reboot after install, the server is restart (reboot) again (alias unlimited).

The bios system show message error "Multi-bit ECC Error" and "bank interleave requested but not enable"

I have been doing experiment and I don't know why this happen.
X4100 M2 Server only suitable with memory DDR2

Image

I put the memory (1 GB x 4, DDR2) on A1 B1 slots on the right and left (CPU 0 and 1), and appear in BIOS.
the system restart again..again, then it can't enter the system of Redhat.

then I move memory and put them in A1 B1 A0 B0 just on the CPU 0, the system restart again has stop and entering the system of Redhat Smilie

I don't know why Smilie ? before this day, memory set on A1 B1 slot and the system don't have problem like this.
I need reason, please Smilie

Last edited by hhaswan; 11-12-2014 at 11:17 PM.. Reason: add more the keyword
# 2  
Did you use ECC memory?

Did you use IBM memory, or something off-the-shelf?

What are the BIOS memory settings?

Either you used the wrong memory, the BIOS settings are incorrect, or your memory is bad.

And IBM servers tend to work only with IBM memory. You might get them to work with non-IBM memory, but you're lucky if it works.
# 3  
Quote:
Originally Posted by achenle
Did you use ECC memory?

Did you use IBM memory, or something off-the-shelf?

What are the BIOS memory settings?

Either you used the wrong memory, the BIOS settings are incorrect, or your memory is bad.

And IBM servers tend to work only with IBM memory. You might get them to work with non-IBM memory, but you're lucky if it works.
yeah I use ECC Memory especially for X4100 M2 Server Sun Fire Microsystem same as the manufacture of the server.

whether this have relate with BIOS memory settings?

If I move memory 1 GB in A0, B0, A1, and B1 slots, the system will appear this message "bank interleave requested but not enable" but I can enter in Linux System and work correctly
# 4  
If you've not already done it, I would disable "quick boot" in the BIOS to force the machine to test all it's memory during POST.

The A1+B1 slot configuration each side is correct according to the book.

Perhaps there's a faulty DIMM. If so, with "quick boot" disabled POST should crash and tell you something.
# 5  
Quote:
Originally Posted by hicksd8
If you've not already done it, I would disable "quick boot" in the BIOS to force the machine to test all it's memory during POST.

The A1+B1 slot configuration each side is correct according to the book.

Perhaps there's a faulty DIMM. If so, with "quick boot" disabled POST should crash and tell you something.
I didn't see option "quick boot" in BIOS system. Do you have any solutions for this?
# 6  
Please refer to the X4100 M2 manual.

The relevant page is a follows: (cut and pasted)

Changing POST Options
These instructions are optional, but you can use them to change the operations that
the server performs during POST testing.
1. Initialize the BIOS Setup utility by pressing the F2 key while the system is
performing the power-on self-test (POST).
The BIOS Main menu screen is displayed.
2. When the BIOS Main menu screen is displayed, select Boot.
The Boot Settings screen is displayed.
3. When the Boot Settings screen is displayed, select Boot Settings Configuration.
The Boot Settings Configuration screen is displayed.
4. On the Boot Settings Configuration screen, there are several options that you can
enable or disable:
Quick Boot: This option is disabled by default. If you enable this, the BIOS skips

certain tests while booting, such as the extensive memory test. This decreases the
time it takes for the system to boot.
System Configuration Display: This option is disabled by default. If you enable

this, the System Configuration screen is displayed before booting begins.
Quiet Boot: This option is disabled by default. If you enable this, the Sun

Microsystems logo is displayed instead of POST codes.
Language: This option is reserved for future use. Do not change.

Add On ROM Display Mode: This option is set to Force BIOS by default. This

option has effect only if you have also enabled the Quiet Boot option, but it
controls whether output from the Option ROM is displayed. The two settings for
this option are as follows:
Force BIOS: Remove the Sun logo and display Option ROM output.

Keep Current: Do not remove the Sun logo. The Option ROM output is not

displayed.
Boot Num-Lock: This option is On by default (keyboard Num-Lock is turned on

during boot). If you set this to off, the keyboard Num-Lock is not turned on
during boot.
Wait for F1 if Error: This option is disabled by default. If you enable this, the

system will pause if an error is found during POST and will only resume when
you press the F1 key.
Interrupt 19 Capture: This option is reserved for future use. Do not change.
Login or Register to Reply

|
Thread Tools Search this Thread
Search this Thread:
Advanced Search

More UNIX and Linux Forum Topics You Might Find Helpful
Ubuntu Install on Sun Fire X4100 network issues
kaf3773
Hi I have two Sun Fire X4100 machines with Ubuntu 12.04 installed on them. I am able to configure the Net Mgt port with an IP address and access the ILOM from the browser. I can also boot the Ubuntu installed and redirect the output. The issue i have is that when i configure the network...... Ubuntu
0
Ubuntu
Need Help, I want to reset password for Sun Fire T2000 Server
Sameer Naik
============================== ALOM BOOTMON v1.3.1 ALOM Build Release: 001 Reset register: f0000000 EHRS ESRS LLRS SWRS ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED. TTYC - Internal Loopback Test TTYC -...... Solaris
4
Solaris
Sun Fire V240 server Fan replacement
Tirmazi
I have a sun fire v240 server. The output of prtdiag -v shows a failed fan. There are 3 fans for cooling system board. There is 1 fan for each of the powersupply (There are 2 powersupplies) From the below output how do i know which fan is bad and whats its location...... Solaris
3
Solaris
Does the Sun fire x4100 support HVM?
jsandova
I have looked all over the bios configuration to enable hardware virtualization and found nothing. Could someone tell if this server support it and if so where I go to enable that feature. By the way this is a x86 server.... Solaris
0
Solaris

Featured Tech Videos