mobo with built-in ssd and linux


 
Thread Tools Search this Thread
Special Forums Hardware mobo with built-in ssd and linux
# 1  
Old 02-13-2012
mobo with built-in ssd and linux

hi, thinking of building a system around this mobo: GA-Z68XP-UD3-iSSD. this has an ssd built-in to the mobo that serves as a cache for the sata drives.

does linux have a chance of working on this? or is it going to get confused.

thanks
# 2  
Old 02-14-2012
It probably presents itself as an AHCI device like everything else
# 3  
Old 02-14-2012
not sure what that (ahci) means.

Intel® Smart Response Technology User Guide
Note: This feature requires that the SATA controller be set to RAID mode via the system BIOS.
Intel® Smart Response Technology is an Intel® Rapid Storage Technology (RST) caching feature that
improves computer system performance. It allows a user to configure computer systems with an SSD
used as cache memory between the hard disk drive and system memory. This provides the advantage of
having a hard disk drive (or a RAID volume) for maximum storage capacity while delivering an SSD-like
overall system performance experience. Intel® Smart Response Technology caching is implemented as a
single drive letter solution; no additional drive letter is required for the SSD device used as cache.
System Requirements:
For a system to support Intel Smart Response Technology it must have the following:
 Intel® Z68 Express Chipset-based desktop board
 Intel® Core™ Processor in the LGA 1155 package
 System BIOS with SATA mode set to RAID
 Intel Rapid Storage Technology software 10.5 version release or later
 Single Hard Disk Drive (HDD) or multiple HDD's in a single RAID volume
 Solid State Drive (SSD) with a minimum capacity of 18.6GB
 Operating system: Microsoft Windows* Vista 32-bit Edition and 64-bit Edition, Microsoft Windows*
7 32-bit Edition and 64-bit.

thanks
# 4  
Old 02-14-2012
From Wikipedia:

Quote:
The Advanced Host Controller Interface (AHCI) is a technical standard defined by Intel that specifies the operation of Serial ATA (SATA) host bus adapters in a non-implementation-specific manner.
It's a hard-disk controller standard which a huge variety of things use. Linux can handle them all with the same driver.
# 5  
Old 02-15-2012
thanks for the info.

i can't find anyone who runs linux on this mobo.

so i will probably pick another one.

thanks
# 6  
Old 02-15-2012
You could ask the manufacturer whether it's AHCI.
# 7  
Old 02-15-2012
Quote:
Originally Posted by Corona688
You could ask the manufacturer whether it's AHCI.
excellent idea. i done so.

thanks
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Want to dual boot windows/Linux on a ssd/hdd configuration

I have a small ssd (240 GB) and a 1TB hdd. I want to use the ssd to store anything related to Windows (os and other stuff like games) and also the linux bootloader (so linux boots faster). And I want my hdd space to be for linux stuff (like the fedora os, linux packages, etc). Can you help me do... (1 Reply)
Discussion started by: mafiaskafia
1 Replies

2. UNIX for Dummies Questions & Answers

What should I format my SSD with?

Hello All, I recently received a new SSD that I am going to use for the purpose of Booting Virtual Machines. I use VMWare Player to boot Windows Guest Operating Systems onto my Linux Laptop. I currently have a SSD drive that I use for this exact same purpose that is formatted as ext3 and I'm... (3 Replies)
Discussion started by: mrm5102
3 Replies

3. Filesystems, Disks and Memory

RAID 0 for SSD

Nowadays the fastest SSDs achieve read-speeds of between 1500 MB/s to 1900 MB/s. Let's say that two such SSDs in RAID 0 achieve roughly double the throughput, ie 3000 MB/s. That is only half an order of magnitude removed from RAM ((10)^(1/2) * 3000 = 10.000), very broadly speaking. So for the... (6 Replies)
Discussion started by: figaro
6 Replies

4. Hardware

Desktop System with no built in video card on linux

hi I would like to ask some of the expert advice on my propose project. I going to assemble a high end desktop system before i quit my job. I had a laptop with linux and win7 pro for just incase bored and need some spare time gaming with nice graphics. My plan is to assemble a i7 processor model... (4 Replies)
Discussion started by: jao_madn
4 Replies

5. AIX

SSD with GPFS ?

Hi, does anyone here happen to know if I could run GLVM or GPFS on Solid State Disks? I have a high volume / high transaction Sybase HACMP cluster currently setup with SRDF to the DR datacentre. My business now considers to move everything to SSD storage but we still need to get the data to... (0 Replies)
Discussion started by: zxmaus
0 Replies

6. BSD

Using SSD in FreeBSD

Now that SSD drives are becoming mainstream, I had a few questions on installing a SSD drive in a FreeBSD environment. Can FreeBSD be made SSD aware, that is, somehow let FreeBSD know that reads and writes should be limited or deferred to extend the disk's life? Is there a setting for wear... (0 Replies)
Discussion started by: figaro
0 Replies

7. Linux

How to convert Linux Kernel built-in module into a loadable module

Hi all, I am working on USB data monitoring on Fedora Core 9. Kernel 2.6.25 has a built-in module (the one that isn't loadable, but compiles and links statically with the kernel during compilation) to snoop USB data. It is in <kernel_source_code>/drivers/usb/mon/. I need to know if I can... (0 Replies)
Discussion started by: anitemp
0 Replies

8. What is on Your Mind?

identify this mobo

I have an old mobo (socket 7) which in a former life was used in a hotel room computer. What I want to know is if anyone knows of a company that used/uses the following boot screen: now from here on I get a infinite amount of 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04.............. ... (0 Replies)
Discussion started by: blowFish@ubuntu
0 Replies

9. UNIX for Dummies Questions & Answers

Problem with comp built for Linux..

I built a PC I intended on using to run Linux. It was using a AMD XP 2000 processor, had a 80 gig hard drive, and 256 mb of ram. I got it all connected and working and installed OpenLinux (from book "Learn Linux in 24 hours" that came with a instillation CD). My intent was to take about a month... (18 Replies)
Discussion started by: Tony Empire
18 Replies
Login or Register to Ask a Question