Some question about SAN on HP 4400 EVA

9 More Discussions You Might Find Interesting

1. HP-UX

SAN Migration question

Hi, I am very new to HP-UX, and we're going to be doing a SAN migration. We're going to take down the machine, and zone it to the new SAN. My question is, will the device names change and will that interfere with the LVM? If the new disks come in with different device names, how would I...

2. AIX

GPFS initial setup, but perhaps this is a SAN/VIO question

I'm having some trouble getting a POC of GPFS up and running. I've read a couple install guides including a couple IBM pdfs but I'm getting stumped on something I think is fairly fundamental.... I'm trying to do this all on a single 795, right now only the VIOs have HBAs so all LUNs are pointed to...

3. Solaris

EVA storage HUNG / Solaris issue

Hi, I have a query , is it possible that few LUNs presented to the Solaris OS which are in the unlabeled state can hung EVA frame and cause it to get unresponsive ? please help. thanks.

4. Red Hat

SAN/LVM question

Hey everyone. I am working on designing a logging solution for a deployment we have going out in a few months. Right now we have a single storage head end, connected via fibre to a SAN. Basically the plan is to create a number of smaller LUNs on the SAN, and then use LVM2 to handle concatenating...

5. UNIX for Advanced & Expert Users

Can AIX 5.3 - 6 Boot From HP EVA 6000 SAN

Hi There, Has anyone had any luck with or know how to get AIX 5+ to boot from a HP EVA 6000 SAN? The servers used here will be P Class Blades My initial searches on this so far did not bring results so I am guessing this may not be possible on HP SAN's but please let me know if I am...

6. AIX

Question about IBM San Ds4500

I have a question about SAN commands I have almost 15Tb of disk on my san but assigned and something else I have almost 11Tb There is a command to know, what its my real total storage capacity and another command to know how much I used .? Thanks again in advance

7. Solaris

Thoughts/experiences of SAN attaching V880 to EMC SAN

Hi everyone, I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN? At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the...

8. HP-UX

Any EVA admin's out there?

I was conveniently excluded from some EVA8000 training, and now find myself with an EVA zoned, but no physical devices :( My ioscan appears as follows: ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782) fc 0 0/1/0/0 ...

9. Linux Benchmarks

PowerMac 4400 YLD 3.0

CPU/Speed: PowerPC 603ev 200Mhz Ram: 92M EDO Ram Motherboard: Apple Bus: 2 PCI Cache: L1 32k and L2 256k Controller: ATA Disk: 2GB ATA Load: 1 user, running httpd, Xwin, various daemons Kernel: Linux 2.4.22-2f Kernel ELF?: ??? pgms: gcc versi�n 3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a);...

LEARN ABOUT DEBIAN

ocsinventory::agent::common

Ocsinventory::Agent::Common(3pm)			User Contributed Perl Documentation			  Ocsinventory::Agent::Common(3pm)

       addController()
	   Add a controller in the inventory.

       addModem()
	   Add a modem in the inventory.

       addDrive()
	   Add a partition in the inventory.

       addStorages()
	   Add a storage system (hard drive, USB key, SAN volume, etc) in the inventory.

       addMemory()
	   Add a memory module in the inventory.

       addPort()
	   Add a port module in the inventory.

       addSlot()
	   Add a slot in the inventory.

       addSoftware()
	   Register a software in the inventory.

       addMonitor()
	   Add a monitor (screen) in the inventory.

       addVideo()
	   Add a video card in the inventory.

       addSound()
	   Add a sound card in the inventory.

       addNetwork()
	   Register a network in the inventory.

       setHardware()
	   Save global information regarding the machine.

	   The use of setHardware() to update USERID and PROCESSOR* informations is deprecated, please, use addUser() and addCPU() instead.

       setBios()
	   Set BIOS informations.

       addCPU()
	   Add a CPU in the inventory.

       addUser()
	   Add an user in the list of logged user.

       addPrinter()
	   Add a printer in the inventory.

       addVirtualMachine()
	   Add a Virtual Machine in the inventory.

       addProcess()
	   Record a running process in the inventory.

       addIpDiscoverEntry()
	   IpDiscover is used to identify network interface on the local network. This is done on the ARP level.

	   This function adds a network interface in the inventory.

       setAccessLog()
	   What is that for? :)

       flushXMlTags()
	   Clear the content of $common->{xmltags} (to use after adding it in XML)

POD ERRORS

       Hey! The above document had some coding errors, which are explained below:

       Around line 34:
	   '=item' outside of any '=over'

perl v5.14.2							    2012-04-12					  Ocsinventory::Agent::Common(3pm)

Filesystems, Disks and Memory