Filesystems, Disks and Memory

Discuss NAS, SAN, RAID, Robotic Libraries, backup devices, RAM, DRAM, SCSI, IDE, EIDE topics here.

SMART hdd errors

👤 Login to reply

 
Thread Tools Search this Thread Display Modes
    #1  
Old 12-19-2012
hoo hoo is offline
Registered User
 
Join Date: Feb 2009
Last Activity: 16 March 2013, 11:06 AM EDT
Posts: 27
Thanks: 2
Thanked 0 Times in 0 Posts
SMART hdd errors

Hello,

I receiving this error and failed raid 1 in a partiton. is this errors important?
Thanks.

Full SMART Status report:

Code:
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3000DM001-9YN166
Serial Number:    W1F0KHVL
Firmware Version: CC4C
User Capacity:    3,000,592,982,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Wed Dec 19 22:31:35 2012 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:          ( 575) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 255) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x3085)    SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   087   006    Pre-fail  Always       -       94583040
  3 Spin_Up_Time            0x0003   093   093   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       12
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       218116884
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       5023
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       12
183 Unknown_Attribute       0x0032   099   099   000    Old_age   Always       -       1
184 Unknown_Attribute       0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       1246
188 Unknown_Attribute       0x0032   100   099   000    Old_age   Always       -       8590065668
189 High_Fly_Writes         0x003a   091   091   000    Old_age   Always       -       9
190 Airflow_Temperature_Cel 0x0022   063   061   045    Old_age   Always       -       37 (Lifetime Min/Max 33/38)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       9
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       3466
194 Temperature_Celsius     0x0022   037   040   000    Old_age   Always       -       37 (0 21 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       4
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       17076789973781
241 Unknown_Attribute       0x0000   100   253   000    Old_age   Offline      -       15802775156821
242 Unknown_Attribute       0x0000   100   253   000    Old_age   Offline      -       234706991727638

SMART Error Log Version: 1
ATA Error Count: 1246 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1246 occurred at disk power-on lifetime: 4845 hours (201 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 80 ff ff ff 4f 00  48d+01:14:29.931  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+01:14:29.931  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+01:14:29.913  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+01:14:29.913  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+01:14:29.913  READ FPDMA QUEUED

Error 1245 occurred at disk power-on lifetime: 4844 hours (201 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 80 ff ff ff 4f 00  48d+00:41:32.556  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:32.556  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:32.556  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:32.556  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:32.556  READ FPDMA QUEUED

Error 1244 occurred at disk power-on lifetime: 4844 hours (201 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 80 ff ff ff 4f 00  48d+00:41:07.628  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:07.628  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:07.628  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:07.628  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:07.628  READ FPDMA QUEUED

Error 1243 occurred at disk power-on lifetime: 4844 hours (201 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 80 ff ff ff 4f 00  48d+00:41:04.678  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:04.678  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:04.678  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:04.677  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:04.677  READ FPDMA QUEUED

Error 1242 occurred at disk power-on lifetime: 4844 hours (201 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 80 ff ff ff 4f 00  48d+00:41:01.735  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:01.735  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:01.735  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:01.735  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  48d+00:41:01.735  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4960         -
# 2  Extended offline    Completed without error       00%      4926         -
# 3  Short offline       Completed without error       00%      4850         -
# 4  Extended offline    Completed: read failure       90%      4843         877918576
# 5  Extended offline    Completed: read failure       90%      4836         877918576
# 6  Short offline       Completed without error       00%      4817         -
# 7  Extended offline    Completed: read failure       90%      4813         877918576
# 8  Short offline       Completed without error       00%      4808         -
# 9  Short offline       Completed without error       00%      4802         -
#10  Short offline       Aborted by host               80%      4802         -
#11  Extended offline    Aborted by host               90%      4802         -
#12  Short offline       Completed without error       00%      4801         -
#13  Short offline       Completed without error       00%      4345         -
#14  Short offline       Completed without error       00%      2249         -
#15  Extended offline    Completed without error       00%         5         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Last edited by hoo; 12-19-2012 at 03:43 PM.. Reason: .
Sponsored Links
    #2  
Old 12-20-2012
fpmurphy's Unix or Linux Image
fpmurphy fpmurphy is offline
Registered User
 
Join Date: Dec 2003
Last Activity: 12 June 2016, 11:03 PM EDT
Location: /dev/ph
Posts: 4,996
Thanks: 73
Thanked 476 Times in 438 Posts
Cheap non-enterprise disk. You got 200 plus days out of it. I would replace it.
Sponsored Links
👤 Login to reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

More UNIX and Linux Forum Topics You Might Find Helpful
Thread Thread Starter Forum Replies Last Post
Explain the difference between the commands cd ~smart and cd ~/smart phunkypants UNIX for Dummies Questions & Answers 1 11-04-2010 06:52 PM
Old HDD copy to new HDD ? im lost... Chevy89rocks UNIX for Dummies Questions & Answers 5 02-20-2009 02:23 AM
Adapter Errors and Link Errors mcastill66 UNIX for Advanced & Expert Users 0 08-02-2005 06:11 PM



All times are GMT -4. The time now is 06:47 PM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
×
UNIX.COM Login
Username:
Password:  
Show Password





Not a Forum Member?
Forgot Password?