issue with smartmontools


 
Thread Tools Search this Thread
Special Forums Hardware Filesystems, Disks and Memory issue with smartmontools
# 1  
Old 04-23-2005
Data issue with smartmontools

Hi,

I need help!! I am trying to monitoring the temperature and error rate for diffrent storage systems - hard disk, SCSI, RAIDs.
For, Hard disk, smartctl works perfectly, but in case of SCSI and RAIDs, it fails.
smartctl notify only about the storage systems, health (i.e., OK,etc) but not other properties status.

Please, let me know if there is any way to monitor the disk systems for following disk controllers:

SCSI storage controller -
1. Adaptec AIC-7892A U160/m (rev 2);
2. LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 7)

RAID bus controller -
1. American Megatrends Inc. MegaRAID (rev 2);
2. 3ware Inc 3ware 7000-series ATA-RAID (rev 1).

Thanks,
Priyanka
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Issue with wc -c and wc -m

Hi All, I have a small queries to get the character count i tried with wc -c and wc -m but its not returend current result For eg: wc -c wc -m echo "Name" | wc -c result: 5 but actually it should returned 4 Help me on this to ge the correct one. Thanks! ----------... (4 Replies)
Discussion started by: siva.pitchai
4 Replies

2. Shell Programming and Scripting

Variable value substitution issue with awk command issue

Hi All, I am using the below script which has awk command, but it is not returing the expected result. can some pls help me to correct the command. The below script sample.ksh should give the result if the value of last 4 digits in the variable NM matches with the variable value DAT. The... (7 Replies)
Discussion started by: G.K.K
7 Replies

3. Solaris

smartmontools ?

Has anyone managed installing smartmontools on (Sparc) Solaris 10? how to do it? thanks. (1 Reply)
Discussion started by: orange47
1 Replies

4. Shell Programming and Scripting

Need assistance with a file issue and a terminal issue

Hello everyone, I'm in need of some assistance. I'm currently enrolled in an introductory UNIX shell programming course and, well halfway through the semester, we are receiving our first actual assignment. I've somewhat realized now that I've fallen behind, and I'm working to get caught up, but for... (1 Reply)
Discussion started by: MrMagoo22
1 Replies

5. Solaris

IP issue

hi , I have a Solaris server which is part of a domain. The IP for this Solaris box is allocated dyanamically by a DHCP. Everytime the solaris box is restarted the IP gets changed. Being an admin what should i do to find the new ip of the Solaris server sitting at my location? Till now i get... (2 Replies)
Discussion started by: BalajiUthira
2 Replies

6. UNIX for Dummies Questions & Answers

ISSUE and ISSUE.NET files

In LINUX(CentOS, RedHat) is there a way to have the banner statement appear before the logon instead of after the logon? In UNIX and Windows the banner appears before a person actually logs on, what I'm seeing in LINUX is that it appears after the login(ftp, telnet, SSH). Thanks (0 Replies)
Discussion started by: ejjones
0 Replies

7. Filesystems, Disks and Memory

Smartmontools and fixing Unreadable Disk Sectors

I found a document: Bad block HOWTO for smartmontools My hard drive is Maxtor: root]# fdisk -lu /dev/hda Disk /dev/hda: 81.9 GB, 81964302336 bytes 255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors Units = sectors of 1 * 512 = 512 bytes Disk identifier: 0x3f4e3f4d ... (0 Replies)
Discussion started by: justinian
0 Replies

8. Shell Programming and Scripting

Unix Arithmatic operation issue , datatype issue

Hi, I have a shell scripting. This will take 7 digit number in each line and add 7 digit number with next subsequent lines ( normal addition ). Eg: 0000001 0000220 0001235 0000022 0000023 ........... ......... ........ Like this i am having around 1500000 records. After adding... (23 Replies)
Discussion started by: thambi
23 Replies

9. UNIX for Dummies Questions & Answers

ps issue

HI All, Suddenly don't know what happened to redhat linux 7.2 any program start then itsn't listing while using ps -ef ex: ./xyz this xyz program pid not showing in ps-ef Pls let me know what is the reason for the same. Thanks a lot in advance Bache (7 Replies)
Discussion started by: bache_gowda
7 Replies
Login or Register to Ask a Question
ASR(4)							   BSD Kernel Interfaces Manual 						    ASR(4)

NAME
asr -- driver for Adaptec I2O based SCSI/ATA host bus adapters SYNOPSIS
device asr DESCRIPTION
The Adaptec asr driver provides access to disks and disk arrays controlled by I2O based host bus adapters and SmartRAID SCSI RAID adapters through the standard SCSI disk da(4) interface. The supported adapters provide 64 bit PCI, Compact PCI, Zero Channel PCI, and up to four channels of Ultra2, Ultra 160, or Ultra320 SCSI, or two channels of 1GB Fibre. All support RAID-0, RAID-1, RAID-10, RAID-5 and RAID-50 arrays. All SCSI target types are supported. For the ATA based controllers, one IDE drive per channel is supported. Hot-swapping of IDE drives is not supported at this time. All host bus adapters must be configured before they can be used with any operating system. Please contact Adaptec directly to obtain the latest information on configuration utilities for the adapters. Currently there are both a Motif based GUI configuration utility and a CLI based configuration utility available from the Adaptec Web site. The cards and arrays can also be configured via the BIOS based configura- tion tool (SMOR). HARDWARE
The adapters currently supported by the asr driver include the following: o Adaptec Zero-Channel SCSI RAID 2000S, 2005S, 2010S, 2015S o Adaptec SCSI RAID 2100S, 2110S o Adaptec ATA-100 RAID 2400A o Adaptec SCSI RAID 3200S, 3210S o Adaptec SCSI RAID 3400S, 3410S o Adaptec SmartRAID PM1554 o Adaptec SmartRAID PM1564 o Adaptec SmartRAID PM2554 o Adaptec SmartRAID PM2564 o Adaptec SmartRAID PM2664 o Adaptec SmartRAID PM2754 o Adaptec SmartRAID PM2865 o Adaptec SmartRAID PM3754 o Adaptec SmartRAID PM3755U2B / SmartRAID V Millennium o Adaptec SmartRAID PM3757 o DEC KZPCC-AC (LVD 1-ch, 4MB or 16MB cache), DEC KZPCC-CE (LVD 3-ch, 64MB cache), DEC KZPCC-XC (LVD 1-ch, 16MB cache), DEC KZPCC-XE (LVD 3-ch, 64MB cache) -- rebadged SmartRAID V Millennium FILES
/dev/asr* Adaptec SCSI RAID control nodes NOTES
The ATA based controllers present their devices as SCSI-like devices via CAM. For IDE drives attached to these cards, a subset of standard SCSI commands and mode pages are understood via translation performed in the card's firmware. SEE ALSO
da(4) HISTORY
The asr (Adaptec SCSI RAID) driver first appeared as the dpti2o driver under BSDi BSD/OS 3.2, then under FreeBSD 2.2.8 and was ported over to the CAM layer represented in 4.0. AUTHORS
The asr driver was kindly donated by Adaptec and is maintained by Mark Salyzyn <mark_salyzyn@adaptec.com>. This manual page was written by Mark Salyzyn and fixed up by Jeroen Ruigrok van der Werven <asmodai@FreeBSD.org>. BSD
July 14, 2004 BSD