9 More Discussions You Might Find Interesting
1. Red Hat
I have an Oracle Linux 7.1 vsphere host built. It's be preconfigured with our security configurations.
What I would like to do is unconfigure this host. Then set the host to do firstboot --reconfigure.
how do I do that using /etc/sysconfig/firstboot?
I've tried setting
... (10 Replies)
Discussion started by: os2mac
10 Replies
2. Linux
Hi everyone,
I am trying to prevent the ehci_hcd kernel module to load at boot time.
Here's what I've tried so far:
1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here):
2) Blacklisted the module by adding the following string to
3) Tried to blacklist the module... (0 Replies)
Discussion started by: gacanepa
0 Replies
3. Solaris
Hi,
I wanted to know if a reconfig reboot is necessary from the ok prompt when am changing the CPU or a simple boot command would also work...?
Thanks in advance. (5 Replies)
Discussion started by: aksijain
5 Replies
4. Solaris
will reboot -- -r update boot_archive ?
this is the what I see on my console.
# reboot -- -r
15+0 records in
15+0 records out
syncing file systems... done
It doesn't say updating /platform/sun4u/boot_archive as it displayed on my console after init 0or init 6 ? (3 Replies)
Discussion started by: zigi_p5
3 Replies
5. Solaris
Hi gurus
Could anybody tell me which file is read by kernel to set its default system kernal parameters values in solaris. Here I am not taking about /etc/system file which is used to load kernal modules or to change any default system kernal parameter value
Is it /dev/kmem file or something... (1 Reply)
Discussion started by: girish.batra
1 Replies
6. Linux
supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" message comes.
I tried giving acpi=off to the kernel command line but same problem.It shows everything ok and no problem with memory and processors and power supplies.Wt could be the reason?
It has... (1 Reply)
Discussion started by: pankajd
1 Replies
7. Solaris
Current Setup:
OS: Solaris 10 (5.10) x64
Motherboard: SUPERMICRO MBD-PDSME+-O LGA 775 Intel 3010
SATA Controller: SUPERMICRO AOC-SAT2-MV8 - SATA Controller (x2)
Link Aggregated @ 2Gb: 110MB sustained throughput :b:
NAME STATE READ WRITE CKSUM
storagepool ONLINE ... (3 Replies)
Discussion started by: sol72
3 Replies
8. SuSE
Hi All,
Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff.
Cheers,
Brendan (4 Replies)
Discussion started by: Brendan Kennedy
4 Replies
9. Programming
hi all!
i have developed a mechanism in system.c to count how many times each kernel call is called. The results are held in an array in system.c . What i want to do is to create a new kernel call which will print this array. I need help in passing the array from system.c to the new kernel call. ... (5 Replies)
Discussion started by: aureliano
5 Replies
LEARN ABOUT SUSE
ocf_heartbeat_oracle
OCF_HEARTBEAT_ORACLE(7) OCF resource agents OCF_HEARTBEAT_ORACLE(7)
NAME
ocf_heartbeat_oracle - Manages an Oracle Database instance
SYNOPSIS
oracle [start | stop | status | monitor | validate-all | methods | meta-data]
DESCRIPTION
Resource script for oracle. Manages an Oracle Database instance as an HA resource.
SUPPORTED PARAMETERS
sid
The Oracle SID (aka ORACLE_SID). (required, string, no default)
home
The Oracle home directory (aka ORACLE_HOME). If not specified, then the SID along with its home should be listed in /etc/oratab.
(optional, string, no default)
user
The Oracle owner (aka ORACLE_OWNER). If not specified, then it is set to the owner of file $ORACLE_HOME/dbs/*${ORACLE_SID}.ora. If this
does not work for you, just set it explicitely. (optional, string, no default)
ipcrm
Sometimes IPC objects (shared memory segments and semaphores) belonging to an Oracle instance might be left behind which prevents the
instance from starting. It is not easy to figure out which shared segments belong to which instance, in particular when more instances
are running as same user. What we use here is the "oradebug" feature and its "ipc" trace utility. It is not optimal to parse the
debugging information, but I am not aware of any other way to find out about the IPC information. In case the format or wording of the
trace report changes, parsing might fail. There are some precautions, however, to prevent stepping on other peoples toes. There is also
a dumpinstipc option which will make us print the IPC objects which belong to the instance. Use it to see if we parse the trace file
correctly. Three settings are possible: - none: don't mess with IPC and hope for the best (beware: you'll probably be out of luck,
sooner or later) - instance: try to figure out the IPC stuff which belongs to the instance and remove only those (default; should be
safe) - orauser: remove all IPC belonging to the user which runs the instance (don't use this if you run more than one instance as same
user or if other apps running as this user use IPC) The default setting "instance" should be safe to use, but in that case we cannot
guarantee that the instance will start. In case IPC objects were already left around, because, for instance, someone mercilessly
killing Oracle processes, there is no way any more to find out which IPC objects should be removed. In that case, human intervention is
necessary, and probably _all_ instances running as same user will have to be stopped. The third setting, "orauser", guarantees IPC
objects removal, but it does that based only on IPC objects ownership, so you should use that only if every instance runs as separate
user. Please report any problems. Suggestions/fixes welcome. (optional, string, default instance)
clear_backupmode
The clear of the backup mode of ORACLE. (optional, boolean, default false)
shutdown_method
How to stop Oracle is a matter of taste it seems. The default method ("checkpoint/abort") is: alter system checkpoint; shutdown abort;
This should be the fastest safe way bring the instance down. If you find "shutdown abort" distasteful, set this attribute to
"immediate" in which case we will shutdown immediate; If you still think that there's even better way to shutdown an Oracle instance we
are willing to listen. (optional, string, default checkpoint/abort)
SUPPORTED ACTIONS
This resource agent supports the following actions (operations):
start
Starts the resource. Suggested minimum timeout: 120.
stop
Stops the resource. Suggested minimum timeout: 120.
status
Performs a status check. Suggested minimum timeout: 5.
monitor
Performs a detailed status check. Suggested minimum timeout: 30. Suggested interval: 120.
validate-all
Performs a validation of the resource configuration. Suggested minimum timeout: 5.
methods
Suggested minimum timeout: 5.
meta-data
Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.
EXAMPLE
The following is an example configuration for a oracle resource using the crm(8) shell:
primitive example_oracle ocf:heartbeat:oracle
params
sid=string
op monitor depth="0" timeout="30" interval="120"
SEE ALSO
http://www.linux-ha.org/wiki/oracle_(resource_agent)
AUTHOR
Linux-HA contributors (see the resource agent source for information about individual authors)
resource-agents 1.0.3 07/05/2010 OCF_HEARTBEAT_ORACLE(7)