Login or Register to Ask a Question and Join Our Community


Debian

Iptables Nat forward port 29070

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Linux Debian Iptables Nat forward port 29070
# 1  
Old 02-14-2012
Iptables Nat forward port 29070
Hello, the Nat and the forward worked on my debian server up to the reboot of machines.

The following rules*:


/sbin/iptables -t nat -A PREROUTING -p tcp -i eth2 -d xxx.xxx.xxx.xxx --dport 29070 -j DNAT --to-destination 10.0.1.7:29070
/sbin/iptables -A FORWARD -p tcp -i eth2 -o eth0 -d 10.0.1.7 --dport 29070 --sport 1024:65535 -m state --state NEW -j ACCEPT

Since the reboot, that doesn't work any more.

I have another rules towards one the others server and that her works.


/sbin/iptables -t nat -A PREROUTING -p tcp -i eth2 -d xxx.xxx.xxx.xxx --dport 29082 -j DNAT --to-destination 10.0.1.8:29082
/sbin/iptables -A FORWARD -p tcp -i eth2 -o eth0 -d 10.0.1.8 --dport 29082 --sport 1024:65535 -m state --state NEW -j ACCEPT

Thank you for your help .
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Red Hat

Port Forward to VPN client.

Hi all, I can't port forward from WAN to VPN Client. VPN Client Ubuntu 18 192.168.0.16 Port 6000 VPN Gateway for LAN clients Centos 192.168.0.12 Router 192.168.0.1 I can forward to the VPN Client if VPN is not connected if I forward Port 6000 from 192.168.0.1 directly to 192.168.0.16.... (2 Replies)
Discussion started by: stinkefisch
2 Replies

2. Cybersecurity

Openvpn nat and iptables

good day good people hi first to tell that firewall and vpn is working as expected, but I notice something strange. I have host system 11.11.11.11(local ip) firewall is blocking everything except port to vpn. I have vpn on virtualized system 22.22.22.22 (CentOS both host and virtual). ... (0 Replies)
Discussion started by: end
0 Replies

3. Cybersecurity

iptables in a NAT scenario

Hi, I am learning IPTables have this question. My server is behind a firewall that does a PAT & NAT to the LAN address. Internet IP: 68.1.1.23 Port: 10022 Server LAN IP: 10.1.1.23 port: 22 Allowed Internet IPs: 131.1.1.23, 132.1.1.23 I want to allow a set of IPs are to be able to... (1 Reply)
Discussion started by: capri_guy84
1 Replies

4. Red Hat

NAT Loopback and iptables

Hello, please can you help and explain me. I have two servers. Both are RHEL6. I use the first one like router and the second one for apache. Router forwards 80 port on the second server and I can open that from the internet (mysite.com, for example). But I can not open mysite.com if i try to... (0 Replies)
Discussion started by: 6765656755
0 Replies

5. UNIX for Advanced & Expert Users

ipf/ipnat NAT/port forward issues

I've been going crazy trying to get this working. Here's the situation: we have a Solaris 10 box that connects an internal network to an external network. We're using ipf/ipnat on it. We've added a couple of new boxes to the internal network (192.168.1.100, .101) and want to be able to get to port... (1 Reply)
Discussion started by: spakov
1 Replies

6. Ubuntu

Iptables forward traffic to forward chain!!!

Hi, I am new to linux stuff. I want to use linux iptables to configure rule so that all my incoming traffic with protocol "tcp" is forwarded to the "FORWARD CHAIN". The traffic i am dealing with has destination addresss of my machine but i want to block it from coming to input chain and somehow... (0 Replies)
Discussion started by: arsipk
0 Replies

7. IP Networking

iptables forward public IP, no NAT, Debian i386

Hello all, got kinda problem. Have two machines in LAN, one of them connected to Internet directly, another one must be forwarded through the first one. Masquerading works perfectly, but is not what is needed here. Both machines have public IP addresses, when the second machine is forwarded its... (0 Replies)
Discussion started by: Action
0 Replies

8. IP Networking

port forward & DYNDNS Inquiry

Hi, Is there anyone know how to make port forward? And also, how to set up DYNDNS with router? (1 Reply)
Discussion started by: eel
1 Replies

9. UNIX for Advanced & Expert Users

ssh port forward over three server

Hello there, I have a big problem, and I hope somebody can help me. I try to realize a port forward over three server. Here is a picture... Client Server1 | Server2 ------- ------- | ------- |...... | |...... | | |...... ... (2 Replies)
Discussion started by: Art007
2 Replies

10. IP Networking

NAT Packets/Port Openine

Firstly, I have no knowledge of hubs, so please keep any advice simple! I have a UNIX hub, connecting three PCs and would like to know if the hub has NAT translation for incoming packets and if th hub is able to NAT translate packets coming in to a local (internal) LAN address.. (3 Replies)
Discussion started by: MartinD
3 Replies
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

nbtscan

NBTSCAN(1)						      General Commands Manual							NBTSCAN(1)

NAME

       nbtscan --  program for scanning networks for NetBIOS name information

SYNOPSIS

       nbtscan	[-v]   [-d]   [-e]   [-l]   [-t  timeout]   [-b  bandwidth]   [-r]   [-q]   [-s separator]  [-h]  [-m retransmits]  [-f filename |
       scan_range]

DESCRIPTION

       This manual page documents briefly the nbtscan command.

       This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.

       nbtscan is a program for scanning IP networks for NetBIOS name information. It sends NetBIOS status query to each address in supplied range
       and  lists  received information in human readable form. For each responded host it lists IP address, NetBIOS computer name, logged-in user
       name and MAC address (such as Ethernet).

OPTIONS

       A summary of options is included below.

       -v	 Verbose output. Print all names received from each host.

       -d	 Dump packets. Print whole packet contents. Cannot be used with -v, -s or -h options.

       -e	 Format output in /etc/hosts format.

       -l	 Format output in lmhosts format. Cannot be used with -v, -s or -h options.

       -t timeout
		 Wait timeout seconds for response. Default 1.

       -b bandwidth
		 Output throttling. Slow down output so that it uses no more that bandwidth bps.  Useful on slow links, so  that  ougoing  queries
		 don't get dropped.

       -r	 Use local port 137 for scans. Win95 boxes respond to this only.  You need to be root to use this option.

       -q	 Suppress banners and error messages.

       -s separator
		 Script-friendly output. Don't print column and record headers, separate fields with separator.

       -h	 Print human-readble names for services.  Can only be used with -v option.

       -m retransmits
		 Number of retransmits. Default 0.

       -f filename
		 Take IP addresses to scan from file "filename"

       scan_range
		 What  to  scan.  Can  either  be  single  IP  like  192.168.1.1  or range of addresses in one of two forms: xxx.xxx.xxx.xxx/xx or
		 xxx.xxx.xxx.xxx-xxx.

BUGS

       Report bugs to alla@sovlink.ru (that's autor of nbtscan). I cannot promise to do anything but I might well want fix it. Remember:  no  war-
       ranty.  At least it's worth what you payed for it.

AUTHOR

       This  manual  page  was	written by Ryszard Lach rla@debian.org for the Debian GNU/Linux system (but may be used by others) and is based on
       nbtscan author's README file.  Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free  Docu-
       mentation License, Version 1.1 or any later version published by the Free Software Foundation.

																	NBTSCAN(1)