Iptables Nat forward port 29070

Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
Operating Systems Linux Debian Iptables Nat forward port 29070
# 1  
Iptables Nat forward port 29070

Hello, the Nat and the forward worked on my debian server up to the reboot of machines.

The following rules*:


/sbin/iptables -t nat -A PREROUTING -p tcp -i eth2 -d xxx.xxx.xxx.xxx --dport 29070 -j DNAT --to-destination 10.0.1.7:29070
/sbin/iptables -A FORWARD -p tcp -i eth2 -o eth0 -d 10.0.1.7 --dport 29070 --sport 1024:65535 -m state --state NEW -j ACCEPT

Since the reboot, that doesn't work any more.

I have another rules towards one the others server and that her works.


/sbin/iptables -t nat -A PREROUTING -p tcp -i eth2 -d xxx.xxx.xxx.xxx --dport 29082 -j DNAT --to-destination 10.0.1.8:29082
/sbin/iptables -A FORWARD -p tcp -i eth2 -o eth0 -d 10.0.1.8 --dport 29082 --sport 1024:65535 -m state --state NEW -j ACCEPT


Thank you for your help .
Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #407
Difficulty: Medium
Cygwin's default package selection is quite small, containing little more than the bash shell and the core file manipulation utilities expected of a Unix command line.
True or False?

10 More Discussions You Might Find Interesting

1. Cybersecurity

Openvpn nat and iptables

good day good people hi first to tell that firewall and vpn is working as expected, but I notice something strange. I have host system 11.11.11.11(local ip) firewall is blocking everything except port to vpn. I have vpn on virtualized system 22.22.22.22 (CentOS both host and virtual). ... (0 Replies)
Discussion started by: end
0 Replies

2. IP Networking

Nat and packet limits with iptables

Hi all, I have a following situation: - I want certain source IPs to be natted to a different destination IP and Port. Following is how I am achieving it: /usr/local/sbin/iptables -t nat -A PREROUTING -p tcp -s 192.168.10.12 --dport 1500 -j DNAT --to-destination 192.168.10.20:2000 ... (3 Replies)
Discussion started by: ahmerin
3 Replies

3. Cybersecurity

iptables in a NAT scenario

Hi, I am learning IPTables have this question. My server is behind a firewall that does a PAT & NAT to the LAN address. Internet IP: 68.1.1.23 Port: 10022 Server LAN IP: 10.1.1.23 port: 22 Allowed Internet IPs: 131.1.1.23, 132.1.1.23 I want to allow a set of IPs are to be able to... (1 Reply)
Discussion started by: capri_guy84
1 Replies

4. Red Hat

NAT Loopback and iptables

Hello, please can you help and explain me. I have two servers. Both are RHEL6. I use the first one like router and the second one for apache. Router forwards 80 port on the second server and I can open that from the internet (mysite.com, for example). But I can not open mysite.com if i try to... (0 Replies)
Discussion started by: 6765656755
0 Replies

5. UNIX for Advanced & Expert Users

ipf/ipnat NAT/port forward issues

I've been going crazy trying to get this working. Here's the situation: we have a Solaris 10 box that connects an internal network to an external network. We're using ipf/ipnat on it. We've added a couple of new boxes to the internal network (192.168.1.100, .101) and want to be able to get to port... (1 Reply)
Discussion started by: spakov
1 Replies

6. Ubuntu

Iptables forward traffic to forward chain!!!

Hi, I am new to linux stuff. I want to use linux iptables to configure rule so that all my incoming traffic with protocol "tcp" is forwarded to the "FORWARD CHAIN". The traffic i am dealing with has destination addresss of my machine but i want to block it from coming to input chain and somehow... (0 Replies)
Discussion started by: arsipk
0 Replies

7. IP Networking

iptables forward public IP, no NAT, Debian i386

Hello all, got kinda problem. Have two machines in LAN, one of them connected to Internet directly, another one must be forwarded through the first one. Masquerading works perfectly, but is not what is needed here. Both machines have public IP addresses, when the second machine is forwarded its... (0 Replies)
Discussion started by: Action
0 Replies

8. IP Networking

port forward & DYNDNS Inquiry

Hi, Is there anyone know how to make port forward? And also, how to set up DYNDNS with router? (1 Reply)
Discussion started by: eel
1 Replies

9. UNIX for Advanced & Expert Users

ssh port forward over three server

Hello there, I have a big problem, and I hope somebody can help me. I try to realize a port forward over three server. Here is a picture... Client Server1 | Server2 ------- ------- | ------- |...... | |...... | | |...... ... (2 Replies)
Discussion started by: Art007
2 Replies

10. IP Networking

NAT Packets/Port Openine

Firstly, I have no knowledge of hubs, so please keep any advice simple! I have a UNIX hub, connecting three PCs and would like to know if the hub has NAT translation for incoming packets and if th hub is able to NAT translate packets coming in to a local (internal) LAN address.. (3 Replies)
Discussion started by: MartinD
3 Replies
face(1)                                                            User Commands                                                           face(1)

NAME
face - executable for the Framed Access Command Environment Interface SYNOPSIS
face [-i init_file] [-c command_file] [-a alias_file] [filename...] DESCRIPTION
The Framed Access Command Environment Interface (FACE) presents your files and file folders on the screen through a system of menus and forms if you are properly set up as a FACE user. filename must follow the naming convention Menu.xxx for a menu, Form.xxx for a form, and Text.xxx for a text file, where xxx is any string that conforms to the UNIX system file naming conventions. The Form and Menu Language Interpreter (FMLI) descriptor lifetime will be ignored for all frames opened by argument to face. These frames have a lifetime of immortal by default. If filename is not specified on the command line, the FACE Menu will be opened along with those objects specified by the LOGINWIN environment variables. These variables are found in the user's .environ file. OPTIONS
The following options are supported: -a alias_file Alias file -c command_file Command file -i init_file Initial file OPERANDS
The following operand is supported: filename The full pathname of the file describing the object to be opened initially. EXIT STATUS
The face command will return a non-zero exit value if the user is not properly set up as a FACE user. FILES
$HOME/pref/.environ ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWfac | +-----------------------------+-----------------------------+ SEE ALSO
env(1), attributes(5) SunOS 5.10 5 Jul 1990 face(1)