Login or Register to Ask a Question and Join Our Community


Cybersecurity

IPCop

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums Cybersecurity IPCop
# 1  
Old 06-09-2003
IPCop
I just recently heard about IPCop. I am curious if anyone knows anything about this program/os and if I should attempt to use it. I currently have a cable modem connected straight to my pc with a trial version firewall. But what I want is to setup IPCop on a pc and connect the cable modem to it then connect that pc to a hub/switch and connect my computers to it. Also, I am curious if with this setup I could connect my work laptop to it and then use my work vpn client? A lot of questions, I know but I haven't had the time to read up on this yet and I need to set it up tomorrow or buy a router, if I set it up this way I don't have to buy anything because I have all the listed items. Thanks for any and all help. Oh, and if I have put this in the wrong thread please move it or let me know thanks.
Login or Register to Ask a Question

Previous Thread | Next Thread
Login or Register to Ask a Question

LEARN ABOUT SUNOS

liebert

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME

       liebert - Driver for Liebert contact-closure UPS equipment

NOTE

       This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
       contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
       You may have to build another cable with DTR connected through to the UPS for it to work.

       There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
       fundamental limitation of any contact-closure driver.

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012								LIEBERT(8)