Login or Register to Ask a Question and Join Our Community


AIX

change network adapter

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems AIX change network adapter
# 1  
Old 06-04-2008
change network adapter
hello

i've need to change network adapter on machine H80 aix 4.3.3 hacmp ( ent0 )
what i need to do after the new adapter installed on the machine?

thanks

best regards

ariec
# 2  
Old 06-04-2008
Quote:
Originally Posted by ariec
[...]i've need to change network adapter on machine H80 aix 4.3.3 hacmp ( ent0 )
what i need to do after the new adapter installed on the machine?
[...]
Do you mean "replace"? Are you going to replace the adapter with the same type? Just make sure that after the change the adapter device name (ent0, en0) and the IP-address is the same as before. So don't rmdev -dl the device if it is the same type (don't flush the adapter's CuAt information).
HACMP is nice when you want to exchange hardware as the service can be running on another node while the repair is going on. You can start HACMP on the repaired node and fallback the resource group after the new device is configured as its predecessor was.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. SCO

Can not recognize network adapter SCO UNIX in HP z400

hi .I've installed an operating system SCO in HP Z400 and network cards ZyXEL model FN312 with Chipset RTL8139D put it on .network card installed but do not display network card with command ifconfig -a in list and just show loopback. show message : dlpid:unable to open network adapter driver... (14 Replies)
Discussion started by: moein.mojtaba
14 Replies

2. Hardware

Problematic RTL8188EE Wireless Network Adapter

Good Day All, There are numerous results when searching google on this issue, however, none seem to have a solution. I have read until my eyes bleed and banged my head on the table more than once! :) I am hoping to resolve this issue -- or at least have a decent workaround. It is a real... (13 Replies)
Discussion started by: RogerBaran
13 Replies

3. Programming

Compiling virtual network adapter driver problem (net_device struct)

Hi, I found on linuxgazette.net/93/bhaskaran.html page very useful sample of virtual driver (not connected to real hardware). I try to compile it with no effect. So: I got fresh Ubuntu 9.10 (kernel 2.6.31-14) My source is saved in networkAdapter.c file in /usr/src/myModules directory. I... (21 Replies)
Discussion started by: Chrisdot
21 Replies

4. UNIX for Dummies Questions & Answers

Simulated driver for Network Interface Adapter

Hi all, I got sort of a task to do. I have to write in C "simulated network driver". What does it mean? - It has to run on all network adapters - It has to be as simple as it can be - It has to run on all linux distributions (or at least most of them) - It does not have to run a network... (4 Replies)
Discussion started by: Chrisdot
4 Replies

5. UNIX for Dummies Questions & Answers

SCO Unixware 7.1.4 Network Adapter Error

Hi All I P2Vd a Unixware 7.1.4 box with VMWare Vsphere. I try to add a network adapter under Network Configuration Manager and it comes up with the error attached. I've added a virtual adapter using the "E1000" option. It detects both the AMD PCI NET and E1000 virtual adapters under Network... (8 Replies)
Discussion started by: flashinwrx
8 Replies

6. IP Networking

Maximum IP Address Configured on Intel Network Adapter

Hi All, Sorry if this is not the correct forum to answer. But hope somebody can help me... For these two types of network adapter: Intel(R) PRO/1000 MT Server Adapter Intel(R) PRO/1000 MT Dual Port Network Adapter How many IP addresses can be configured on it at the same time? System... (3 Replies)
Discussion started by: wilsonSurya
3 Replies

7. UNIX for Dummies Questions & Answers

External Network Adapter for Solaris 10

Hi All, I am new here - this is my first post. I have installed Solaris 10 5/09 on my Dell M6300. The install went well, but the Dell's onboard network card is the Broadcom BCM5756ME Gigabit Ethernet - and sadly no Solaris driver exists for it. The Solaris 10 install just jumped by the... (1 Reply)
Discussion started by: soulmerchant
1 Replies

8. AIX

How to active this network adapter?

When I configure two VIO Servers, VIOS1 used to ping its gateway, after I configured second VIOS2, VIOS1 cannpt ping its gateway, when I run this command: entstat -all ent#|grep -i priority Priority: 5 Active: False How to make Active to True? (1 Reply)
Discussion started by: rainbow_bean
1 Replies

9. AIX

hacmp network adapter re-define

I have an LPAR in a P5 machine which has been setup in an HACMP cluster. The person who set it up allocated the wrong network adapter (en) to the persistent network. For the life of me I cannot find where I can re-assign this adapter. Anyone able to help me as I am tearing my hair out and do not... (1 Reply)
Discussion started by: johnf
1 Replies

10. Solaris

Sun v440/v880 network adapter teaming

Is it possible to team two network adapters for fault tolerance in a Sun v440 or v880 Solaris 8 box? If so how would I go about doing so? (1 Reply)
Discussion started by: ghuber
1 Replies
Login or Register to Ask a Question