IBM P730 running AIX 7.1 (8231-E2B) - Fans spinning loud/max rpm?


Login or Register to Reply

 
Thread Tools Search this Thread
# 1  
IBM P730 running AIX 7.1 (8231-E2B) - Fans spinning loud/max rpm?

We have a IBM P730 machine running AIX 7.1 in a properly air cooled server room. Just recently the fans on the unit kicked into overdrive, they are very loud and spinning at max.

Typically this happens when the server first boots then they normalize.

However for some odd reason, they sound like they are spinning at max RPM.

There is no LED amber light on the control panel or anything in the errpt (though I think it was cleared very recently so if there was something in there - it is now gone).

Is there a way from the OS to control the fan speed? There is no LPARs on AIX, we run the OS on bare metal - no virtualization of any kind.

Since this is a D/R site - I have tried to shutdown and startup the machine (I know seems excessive for a UNIX machine); but it did not resolve the issue.

I also tried the "diag" command in AIX and didn't find any issues.
# 2  
Quote:
Originally Posted by c3rb3rus
Is there a way from the OS to control the fan speed? There is no LPARs on AIX, we run the OS on bare metal - no virtualization of any kind.
None that i would know of. As far as i know the fans are controlled by thermo-sensors which kick them up when the system gets (too) hot and slower them once the temperature lowers.

Quote:
Originally Posted by c3rb3rus
I also tried the "diag" command in AIX and didn't find any issues.
You might try connecting to the service processor port and look at the ASMI. In case the system is not connected to a HMC: you need a web browser on the system you connect with and a crossover network cable to connect your system to it (i use a small netbook with Linux for such purposes). You have to configure an IP address out of the address range the interface is configured with (defaults are 169.254.2.147, 169.254.3.147, 169.254.2.146 and 169.254.3.146, see the IBM documentation.

You will find something in the logs there, even when the orange LED has been cleared - if there was anything, to begin with. To me it sounds like one of these thermo-sensors might be broken/somehow dysfunctional, in this case only the hardware support can help. (You *do* have a hardware support contract, don't you?)

I hope this helps.

bakunin
# 3  
I was thinking the service processor route next, it has been awhile since I have used it - thanks for the notes and link to docs...

We do not have any hardware support on the system, it is scheduled to be replaced in a few months so I just need to squeeze a bit more life out of it.

When I look at the location codes for the P730 here, it shows the sensor should be at "Un -D1"; looks like that's the whole control panel that slides out - i'll try re-connecting that part.

Interesting that I was not able to see in "diag" a way to select and test the thermal sensor, it was not in the list.

Last edited by c3rb3rus; 10-31-2018 at 08:13 PM..
Login or Register to Reply

|
Thread Tools Search this Thread
Search this Thread:
Advanced Search

More UNIX and Linux Forum Topics You Might Find Helpful
IBM Virtual Machine OS on intel x86 and x64? IBM AIX OS on IBM Virtual Machine?
chenyung
Hi There, I have zero information and zero knowledge for IBM virtual machine except Amazon cloud and VMware ESXi (Only Linux OS available). Anyone could provide me the following answer - Can IBM VM been deploy on X86 and X64 (Intel Chip)? If answer is yes any chance to deploy AIX OS...... AIX
13
AIX
pwage-aix for IBM AIX servers
sparcguy
This is the password aging script for aix just completed. So far tested and still testing on one of our aix server running 5.3.0.0. So anyway as you can see it is very similar to pwage-hpux-T the only difference on aix /etc/passwd file looks in this format. Also for this script to work you need to...... AIX
0
AIX
How to make RPM not write to RPM database if RPM fails to deploy?
3junior
How to make RPM not write to RPM database if RPM fails to deploy? IE I create an rpm spec file that contains the following if then exit 1 fi My rpm will fail at deployment, but if I do rpm -qa , I can see the rpm in the rpm db... Shell Programming and Scripting
3
Shell Programming and Scripting
IBM AIX on IBM Eseries & x series server
Arun.Kakarla
Hi, I want to know whether IBM AIX can be installed on the IBM e series and x series server hardware? Thanks & Regards Arun... AIX
2
AIX
max os x .plist not running as scheduled?
Movomito
Hello all, I am admittedly a newbie and have created a plist designed to fire off a shell script everyday at 3:00pm. It is located in /Library/LaunchDaemons/. I use it to mirror a hard local drive with a remote one. It worked one time but not again after that. I never restart the machine...... UNIX for Dummies Questions & Answers
0
UNIX for Dummies Questions & Answers