I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command...
...and I keep getting the following error message:
I've googled this error message and found many sources (including this thread on this site) that indicate it is a problem with the block size on the tape being different from the block size on the drive. However, I've tried changing the block size on the drive to 0 (variable), 512, and 1024, using this command...
, and nothing is working. When I set the block size to 512 or 1024, the2second line of the error message changes to this:
I'm afraid the drive might be broken, but I'm hoping someone might have some other suggestions for me. If I haven't included enough info, let me know.
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Hi,
I'm at AIX 5.3.
My EOD program is giving following error while writing to tape:
Can't write output
cpio: Media Surface error
Failed on Shell-script
cd /; cpio -ocB 2 >> /autoline/misc/logs/bk.CopyToTape < /autoline/work/BACKUP.01022 1>/dev/rm0
I have tried with several new tapes,... (2 Replies)
Hello All,
I have HP Openview storage data protector version 5.5. When I am going to write my backup I have an error message saying "Connot Open Device /dev/rmt/0mn"
Follownig is my output:
# ls -l /dev/rmt/0mn
crw-rw-rw- 2 bin bin 205 0x080140 Jan 17 16:41 /dev/rmt/0mn
# uname -a... (2 Replies)
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Dear all,
I have ultriam3 tape. It is connected my LPAR. I have that the Sl.Nos. and slot number. but run the cfmgr i am not getting the tape drive.
I have fired the command lsdev -Cc tape but no reply.
how will i configure the tape in LPAR?
Please suggest. It is very urgent. (3 Replies)
I replaced a HP Superstore Dat 40 with another HP Superstore Dat 40, but my backupedge software keeps putting up error code 1 (device not found) I have tried reinstaling the drive as DAT Alad stp 0 6 0 0. I'm not a computer expert but willing to have a go. I went into Backupedge to try and format a... (2 Replies)
I am experimenting with one of my TSM processes, and I am trying to write something to a 4mm tape.
I tried to use the tctl command, but, I was unsuccessful.
what AiX command can I run in order to see if my output is on the tape ?
Thank You ! (0 Replies)
Hello all,
I have just installed an HP dat72 external tape drive to an IBM 275 Intellistation (AIX 5L). It was installed as an Other SCSI Tape Drive (rmt1). I am using the Web Based System Manager at this point to do an initial backup
of a journaled file system. I am getting an error and am... (1 Reply)
Thanks for checking in.
We have this script that does a backup called Ignite on HP-UX
in this script it does everything it supposed to do accept one thing
Script
#########################################
echo
clear
cd /
echo " Please ensure there is a DLT tape in Slot 6 of the Tape... (2 Replies)