Login or Register to Ask a Question and Join Our Community


AIX

Power5 9111-520 reload of AIX 6.1 - help needed

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems AIX Power5 9111-520 reload of AIX 6.1 - help needed
# 1  
Old 04-25-2016
Power5 9111-520 reload of AIX 6.1 - help needed
Hello all, I am hoping someone can point me in the right direction here.

We had a machine running AIX 6.1 that someone completely corrupted, so we decided to re-load it from media. I was able to boot into DVD media, select options for complete (destructive) install, AIX standard, etc. The installation seemed to go well. Toward the end I saw a failure screen flash by which seemed to indicate trouble loading file sets for various PCI and USB devices, however the installation seemed to complete and reboot the system.

When the system boots, the graphical console (vga and usb keyboard) only displays the textual AIX welcome screen and then appears to go unresponsive. I was expecting at some point to see the initial AIX setup. Service console and serial ports don't seem to respond to anything either.

There is some evidence that this machine was once configured to be managed by an HMC server ... but that server has gone defunct and not available at this time.

Any advice? I am open to just about anything ...

Thanks
Last edited by RudiC; 04-26-2016 at 02:49 AM.. Reason: Corrected title that had the post's first sentence in it.
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. AIX

AIX 6.1, POWER5 and Spectre/Meltdown

Apologies for this newbie question. We have inherited an IBM p5 520 (9111-520) running AIX 6.1.0.0 which seems to be the base install and no further patches installed. Is this vulnerable to the Spectre/Meltdown threat? Are patches available? Looks like AIX 6.1.0.0 went 'end of support' in... (8 Replies)
Discussion started by: the_garbage
8 Replies

2. AIX

IBM QSECOFR password missing P/N 9405-520

How to remove or reset password QSECOFR from IBM iSeries AS/400 P/N 9405-520. Regards (2 Replies)
Discussion started by: mtbax7
2 Replies

3. AIX

IBM's pSeries 570 vs a 520 vs 550

Hidey Ho Folks, Looking to buy a pServer for playing around with the IBM side of things. Looked around for a bit and notice that there is a significant price gap for the used 570's (Single Units) vs the 520's and 550's that folks are selling. Curious what to watch out for in either case? And... (6 Replies)
Discussion started by: Devyn
6 Replies

4. AIX

Upgrading Power5 from 5.3 to...

I have a power5 that I would like to update and bring everything forward. I am wondering about trouble-free upgrades. Is it better to go 5.3 -> 7 or 5.3 ->6 ->7? The power5 box is behind and hopefully can learn from experiences here. Thanks. (6 Replies)
Discussion started by: redi
6 Replies

5. Hardware

VT 520 Terminal

Back of a VT 520 Teminal has a 1"X1" (approx.) rectangular area covered by a removable plastic flap. It is just above the keyboard hole(mini 6 pin DIN). What is it? Thank you. ---------- Post updated at 02:49 PM ---------- Previous update was at 11:37 AM ---------- I've got the answer.... (0 Replies)
Discussion started by: vectrum
0 Replies

6. AIX

IBM pSeries Power5 9111-285 1,9 GHz

Hi , I am planing to buy IBM pSeries Power5 9111-285 1,9 GHz but I am confused with few things. I would be happy if you could clear it up for me ? 1.Do I have to buy some license in order to create Lpars ? 2.Do I have to buy some license in order to use HMC , micro - partiocioning , VIOS... (4 Replies)
Discussion started by: phobus
4 Replies

7. AIX

Help needed with AIX 6.1

Hi, We have just purchased an ibm Power 520 express box with AIX 6.1 preloaded onto it. Using a null modem cable we have connected this upto a Windows 2003 server. From this Windows 2003 server we can using hyperterminal connect to it. I can aslo connect to the Advanced System Management... (16 Replies)
Discussion started by: yfayyaz
16 Replies

8. AIX

AIX Install on 9111-520

I have a 9111-520 (p5 520) that I inherited, on which I want to install AIX 5.3 or possibly 6.1. I've installed AIX many times, on a variety of platforms, but this one isn't working for me. What I can't seem to figure out is how to set it up to boot the CD. I'm assuming there is something I... (2 Replies)
Discussion started by: thomn8r
2 Replies

9. AIX

Problem with knlist in AIX 5.3 for Power5 processor

Hi all, I have a AIX 5.3 Installation on the Power5 processor. I am using the knlist API for getting the details of the CPU details like user cpu, kernel cpu, idle cpu and wait cpu. My code is working fine on other Installations of AIX like PowerPC_POWER4 but it is giving wrong values on Power5... (0 Replies)
Discussion started by: rajesht
0 Replies
Login or Register to Ask a Question

LEARN ABOUT OPENSOLARIS

mkcd

mkcd(1M)						  System Administration Commands						  mkcd(1M)

NAME

       mkcd - create bootable Solaris ISO image

SYNOPSIS

       /usr/bin/mkcd -v [-l label] media-root iso

DESCRIPTION

       The  mkcd  utility takes media-root (the root of an on-disk Solaris install media) as input and creates a bootable Solaris ISO image in the
       file iso, using mkisofs(8). The file can then be burned onto a CD/DVD with utilities such as cdrw(1) or	cdrecord(1).  (Neither	mkisofs(8)
       nor cdrecord(1) are SunOS man pages.)

       Caution -

	 The directory tree media-root must contain the file boot/grub/stage2_eltorito, which will be written to the media boot sectors. This file
	 will be modified with some boot information, thus it must be writable. If necessary, first save a copy prior to running this utility.

OPTIONS

       The following options are supported:

       -l label

	   Sets label as the label/volume name of the ISO image.

       -v

	   Verbose. Multiple -v options increase verbosity.

OPERANDS

       The following operands are supported:

       media-root

	   Top-level directory of an on-disk Solaris install media.

       iso

	   Name of the output file which will contain the resulting ISO image.

EXAMPLES

       Example 1 Creating an ISO Image and Burning a CD/DVD

       The following commands create an ISO image from the content of s10u1 and burn the image to a CD/DVD.

	 # /usr/bin/mkcd s10u1 s10u1.iso
	 # /usr/bin/cdrw -i s10u1.iso

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Committed 		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       cdrw(1), attributes(5)

       mkisofs(8), (/usr/share/man/man8/mkisofs.8), in the  SUNWfsman package (not a SunOS man page)

SunOS 5.11							    25 Jul 2008 							  mkcd(1M)