Rebooting redundant VIOs and mirroring of PVs they serve to client LPARs


Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
Operating Systems AIX Rebooting redundant VIOs and mirroring of PVs they serve to client LPARs
# 1  
Rebooting redundant VIOs and mirroring of PVs they serve to client LPARs

need to confirm:
we have a system with two VIOs each serving a partition on a local disk to a client LPAR. That client LPAR has them both in a VG which is mirrored (exact). So each disk has a copy of the client LV that the client VG supports. This is the setup that was bequeathed to us by the vendors who set up the system originally, and which we've replicated to further systems.

I'm doing an upgrade cycle on the VIOs. If I reboot one of them after installing the upgrade, I would like
  1. the other VIO to continue serving its instance of the mirrored LV - don't see a reason to anticipate trouble with this
  2. when the rebooted VIO comes back, I expect the client LVM to deal with incongruities between the two copies of the mirrored LV appropriately.

#2 is my concern. What I read about mirror write consistency is that active MWC records writes in the MWC log and reaps that when the VG is varied back on, while passive MWC records that an LV has been opened, and forces a syncvg.

I'm trying to dig up how that applies when I shut down one VIO and thus make one of the client PVs supporting the mirrored client LV disappear for a while, then turn it back on and have it reappear in the mirrored VG. MWC is set to on/active for the mirrored LV.

Should I not worry because this is the correct configuration and this is what it was designed to support ?

Conversely, should I save myself the concern and drive risk to 0 by shutting down the client LPAR ? We have a maintenance window to work with; on the other hand it seems to me this is the kind of scenario that VIO redundancy was meant to address, so I shouldn't have to shut down client LPARs.

TIA...

---------- Post updated 03-03-16 at 11:08 ---------- Previous update was 03-02-16 at 18:09 ----------

well, it worked fine - no bobbles in the filesys

still interested in any views you may have of the above, tx
# 2  
What was not clear to me is whether the storage was physically located.

It sounds like it was using local storage (local, i.e., physical, not from a SAN) and the LPAR (aka virtual machine) was using LVM mirroring.

This was the preferred (read almost only) solution in 2005 before SAN storage was common. HOWEVER, if you have SAN backed storage what is 'common' when you have local (i.e., in the CEC aka Compute node) storage is to use the local storage for rootvg, dvd repositories, secure logs, etc. and SAN and MPIO for hosting VM (or client LPAR) storage.

re: active/passive LVM mirroring: the consistency check was to help 'guess' which mirror was last written when recovering from a crash. In your case, while the VIOS was down, one path was down and it is clear which disk is stale and needs to be synced.

Over time, the disks will sync automatically - but you can speed the process by running syncvg (lsvg vgName will tell you if there are stale disks and if so, how many stale PP)
This User Gave Thanks to MichaelFelt For This Post:
# 3  
yep, we're serving disk local to the VIOs in chunks as LVs to the client LPARs. Thank you for your explanation of active/passive MWC ("in your case, ... one path was down and it is clear..."). That was missing in that clear form from the IBM docs... We had one good update with no complaints, headed for the next.
# 4  
Glad it worked well the first time. And I hope the second one went well as well!
Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #868
Difficulty: Medium
Maclisp is a successor to Common Lisp.
True or False?

10 More Discussions You Might Find Interesting

1. AIX

Need to replace a broken PV in a VIO VG used for client LPARs (and it won't release the old one)

I have a broken PV in a VIO VG that's used to support client LPARs using LVs. On the client LPAR, I reduced all PVs from the relevant client VG and thus deleted it. I.e. there is no client LPAR using the VIO VG. Yet when I try to reducevg the VIO VG, it complains that the LV hosted on the PV is... (2 Replies)
Discussion started by: maraixadm
2 Replies

2. AIX

Chef client on VIOs? How do you manage your VIO configs?

I know the VIOs are generally to be treated as an appliance and one should never drop down to oem_setup_env. In reality however, oem is a very useful tool to get the job done. So that leads me into the question of using the Chef client on a VIO. Currently a big push to manage all our *nix... (4 Replies)
Discussion started by: RecoveryOne
4 Replies

3. UNIX for Advanced & Expert Users

Unable to install client AIX LPAR to vscsi hdisk provided from VIOS

Hi everybody, I have Power5 server with 4 internal hdisks each of 70Gb. VIOS server was installed via Virtual I/O Server Image Repository on the HMC. HMC release - 7.7.0 VIOS rootvg installed on 2 disk(these disks merged to one storage pool during VIOS install process),and 2 others hdisks... (2 Replies)
Discussion started by: Ravil Khalilov
2 Replies

4. HP-UX

PVS command in HP-UX

Dear Engineer, Is there any command in HP-UX work similiar to PVS command in Linux? With Best Regards, Md. Abdullah-Al Kauser (4 Replies)
Discussion started by: makauser
4 Replies

5. AIX

Shared Disk in VIOS between two LPARs ?

is there any way to create shared virtual disk between two LPARs like how you can do it using Storage through Fiber on two servers ? Trying to stimulate HACMP between two LPARs (1 Reply)
Discussion started by: filosophizer
1 Replies

6. AIX

VIOS IP address - separate vlan for vios servers ?

Hello, Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2. What is the common practice - should I isolate my vios... (0 Replies)
Discussion started by: vilius
0 Replies

7. HP-UX

How to Mirror LV and umirror after to change PVs...

Greetings Im running HP UX B 11.11 and Im not sure on how to do this request to "mirror current 5 LVs on vgSPAN to the new LUNs assigned to the VG and unmirror the LVs and finally return the 12 LUNs to SAN storage" The existing LVs were extended to accommodate a user request to extend 2 FS on... (3 Replies)
Discussion started by: hedkandi
3 Replies

8. AIX

DUAL VIOS & Client LPAR hangs at 25b3

I have a DUAL VIO ( IBM Virtual I/O ) setup on p 570. Two Vio server ( VIOS ) and many LPAR clients. VIO ( latest version + service pack + applied the fix ) and AIX 6.1 ML2 When both VIOs are running, and if I turn on a Client LPAR, the LPAR hangs at LED 25b3 for more than 1 hour then it... (2 Replies)
Discussion started by: filosophizer
2 Replies

9. AIX

rebooting vio client

Hi, I would like to reboot vio client but I am not able to access vio client(I am not able to get putty) , I am able to get putty of vio server, is there any command by using which from vio server I can reboot vio client? (3 Replies)
Discussion started by: manoj.solaris
3 Replies

10. IP Networking

to serve or be served??

I have two machines on my network - one OSX mac and one linux box. The mac is my main workhorse, and the linux box does occasional chores and webserving. Currently the mac shares (via NFS) files with the Liinux box. Would it be less demanding on the mac if I made it a client, and moved my files... (2 Replies)
Discussion started by: mistafeesh
2 Replies

Featured Tech Videos