Quick question, any short and fast way to locate and map the physical Ethernet ports on the physical server ?
Server with expansion box has around 12 ethernet ports (fibre and ethernet)
what is the quickest way to map or find out en0 represents which physical port ?
I really don't understand the problem. Let's say you have ent0 in your LPAR. Using lscfg you can see the physical location of the adapter.
I don't remember the exact command but you can turn LED on on the adapter, if you're unsure
You see in the output the drawer (U789A.001) - in this case it is the only one in the box (it's old Power5 510), serial number of the drawer (AAA4720), slot in the drawer (P1) and the port (T1).
The same information you can see in the HMC, using lshwres:
I have a server with 6 Ethernet ports. 4 are the the motherboard based 1 GBE ports and 2 are 10 GBE ports on NICs.
I have set these all up with static IP addresses and use the standard /etc/nsswitch.files. My IP addresses are
net0 192.168.1.82
net1 192.168.2.82
and so on till
net5... (4 Replies)
Is there a way by which we could map Oracle SGA memory into physical files in solaris.
We could find these physical files in /dev/shm/ folder in linux environment but they are missing in solaris. (1 Reply)
When installing Linux, I choose some default setting to use all the disk space.
My server has a single internal 250Gb SCSI disk. By default the install appears to have created 3 logical volumes
lv_root, lv_home and lv_swap.
fdisk -l shows the following
lab3.nms:/dev>fdisk -l
Disk... (2 Replies)
Hello,
I do not know if this is the right title to use. I have a large dictionary database which has the following structure:
where a b c d e are in English and p q r s t are in a target language., the two separated by the delimiter =.
What I am looking for is a perl script which will take... (5 Replies)
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Hello All,
Can anybody please tell me what is the maximum limit of Physical IBM Power Machine which can be handled by single HMC at a single point of time?
Thanks,
Jenish (1 Reply)
I did a netstat -an and saw that ntp was listening on 4 UDP ports for each interface. Is this insecure because they are UDP ports and I don't see them in a listen state, is that because they are just a client.
Thank you.
*.ntp Idle... (2 Replies)
I was in smit, checking on disc space, etc. and it appears that one of our physical volumes that is part of a large volume group, has no free physical partitions. The server is running AIX 5.1. What would be the advisable step to take in this instance? (9 Replies)
Hello,
I need explanations about physical disks and physical volumes. What is the difference between these 2 things?
In fact, i am trying to understand what the AIX lspv2command does.
Thank you in advance. (2 Replies)