Visit Our UNIX and Linux User Community


AIX - FC Switch migration, SAN Migration question!


 
Thread Tools Search this Thread
Operating Systems AIX AIX - FC Switch migration, SAN Migration question!
# 1  
Old 08-16-2015
AIX - FC Switch migration, SAN Migration question!

I'm New to AIX / VIOS

We're doing a FC switch cutover on an ibm device, connected via SAN.

How do I tell if one path to my remote disk is lost? (aix lvm)

How do I tell when my link is down on my HBA port?


Appreciate your help, very much!
# 2  
Old 08-16-2015
Quote:
Originally Posted by BG_JrAdmin
How do I tell if one path to my remote disk is lost? (aix lvm)

How do I tell when my link is down on my HBA port?
That depends on the FC-driver you use. With the EMC driver suite, for instance, there is the powermt command to answer both these questions.

I hope this helps.

bakunin
# 3  
Old 08-16-2015
For standard AIX MPIO - lspath, for IBM SDD PCM - pcmpath, Hitachi and their OEMs - dlnkmgr.

If the link is down on your HBA port, you should see it using either fcstat or lsattr -El fscsiX where X is the number of your device.
# 4  
Old 08-20-2015
Thank you for your help!

I changed out one the two FC switches. It appears my paths have all come back up except for this one "dac0" which appears as "missing" and I'm not having any luck getting rid of that... All of the disks came back fine, just dac0 is missing. This output is from my lpar, not the underlying VIO server. Any ideas?

Code:
#lsdev -l dac0; lsdev -l dac1
dac0 Defined 10-T1-01 MPIO XIV Controller
dac1 Available 10-T1-01 MPIO XIV Controller
#

# 5  
Old 08-21-2015
Hi,

you could try to make that device available with cfgmgr -l dac0.
If this not help you should validate the state of the parent devcie with lsparent -Cl dac0.

Regards

Previous Thread | Next Thread
Test Your Knowledge in Computers #640
Difficulty: Medium
After the purchase of NeXT by Apple, NeXT became the source for macOS, iOS, watchOS, and tvOS.
True or False?

10 More Discussions You Might Find Interesting

1. Solaris

How to identify if disk is attached to SAN and assist in migration.?

I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX. it has one ldom created on it luxadm probe output --- No Network Array enclosures found in /dev/es Found Fibre Channel device(s): Node... (7 Replies)
Discussion started by: kpatel786
7 Replies

2. Red Hat

Volume group not activated at boot after SAN migration

I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
Discussion started by: rbatte1
4 Replies

3. HP-UX

SAN Migration question

Hi, I am very new to HP-UX, and we're going to be doing a SAN migration. We're going to take down the machine, and zone it to the new SAN. My question is, will the device names change and will that interfere with the LVM? If the new disks come in with different device names, how would I... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies

4. AIX

SAN Migration

Hi all, We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP. Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Discussion started by: ElizabethPJ
10 Replies

5. Solaris

Need Help On Solaris Cluster Steps For San Migration

I am going to do a SAN Array migration and need the sequence of steps required on the Solaris cluster before moving the old array luns to new array luns. Here are the steps and I need info on the bold points:( I might even be wrong on the sequence of steps please correct me if I am wrong) 1.... (0 Replies)
Discussion started by: sunshinedeepu
0 Replies

6. HP-UX

SAN Migration of HP-UX hosts

Hello gurus, I am a SAN Admin - not very familiar with the HPUX administration - so need help with the steps in regards to the migration I need to do at my client place. Environment: Migrating from CX4 to VMAX - using OR/Hot Pull. Here are the steps I have put together - HPUX gurus please... (5 Replies)
Discussion started by: jps460
5 Replies

7. AIX

IY17981 fix required for aix 4.3.3 to aix 5L migration but not found

Hi, redbook documentation is telling that IY17981 fix is required for aix 4.3.3 to aix 5L migration. But there is no mention about that fix in any ML installation packages. - My system is ML11 : oslevel –r 4330-11 - But xlC.rte is on wrong version : lslpp -L xlC.rte xlC.rte ... (3 Replies)
Discussion started by: astjen
3 Replies

8. AIX

AIX 5.2 to 5.3 migration

Hello All, We want to upgrade our 44p Model 270 from AIX 5.2 to 5.3. This is a standalone devlopment server but downtime is something we don't want because we have a short development deadline looming. I have no tape drive to make backups to. I myself am a developer and don't have any... (4 Replies)
Discussion started by: Fred Vogel
4 Replies

9. HP-UX

SAN migration

Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch. Any... (0 Replies)
Discussion started by: Hils
0 Replies

10. UNIX for Dummies Questions & Answers

AIX Migration

Hi , Migrating AIX 4.3.3 ML10 to 5.3 ML1 (retaining 32 bit) after successfully going through 5 of the 5.3 Install CD's. After "All fileset's processed successfully " message I was told that system would reboot and then I would get prompted for setting TERm type ( i have an ascii ibm3151) and... (1 Reply)
Discussion started by: Student37
1 Replies

Featured Tech Videos