AIX

-------------------------------------------------------------------------------
                                Welcome to AIX.
                   boot image timestamp: 13:47:15 12/26/2013
                 The current time and date: 19:13:09 12/26/2013
       processor count: 1;  memory size: 15552MB;  kernel size: 35442232
          boot device: /pci@80000002000000a/pci1014,0339@0/sas/disk@0
-------------------------------------------------------------------------------

DIAGNOSTIC OPERATING INSTRUCTIONS


LICENSED MATERIAL and LICENSED INTERNAL CODE - PROPERTY OF IBM.
(C) COPYRIGHTS BY IBM AND BY OTHERS 1982,1991-1995.
ALL RIGHTS RESERVED.

These programs allow you to enter diagnostics, service aids, single
user mode, or low-level maintenance mode.  The diagnostics should be
used whenever problems with the system occur which have not been
corrected by any software application procedures available.

In general, the diagnostics will run automatically.  However, sometimes
you will be required to select options, inform the system when to
continue, do simple tasks, and exchange diskettes.

Several keys are used to control the diagnostics:
- The Enter key continues the procedure or performs an action.
- The Backspace key allows keying errors to be corrected.
- The cursor keys are used to select an option.

To continue, press Enter.

FUNCTION SELECTION

1. Diagnostic Routines
    This selection will test the machine hardware. Wrap plugs and
    other advanced functions will not be used.
2. Advanced Diagnostic Routines
    This selection will test the machine hardware. Wrap plugs and
    other advanced functions will be used.
3. Task Selection(Diagnostics, Advanced Diagnostics, Service Aids, etc.)
    This selection will list the tasks supported by these procedures.
    Once a task is selected, a resource menu may be presented showing
    all resources supported by the task.
4. Resource Selection
    This selection will list the resources in the system that are supported
    by the diagnostic programs. Once a resource is selected, a task menu will
    be presented showing all tasks that can be run on the resource(s).
5. Single User Mode
    The system will enter single-user mode for software maintenance.





To make a selection, type the number and press Enter [1]:5



























The system will now continue the boot process.  Please wait...exec(): 0509-036 Cannot load program ps because of the following errors:
        0509-130 Symbol resolution failed for /usr/lib/libpthreads.a(shr_xpg5.o) because:
        0509-136   Symbol thread_unlock_ (number 15) is not exported from
                   dependent module /unix.
        0509-026 System error: Error 0
        0509-192 Examine .loader section symbols with the
                 'dump -Tv' command.

In properties --> Setting --> under boot you see Keylock position: That should be set to Normal.