Upgrade AIX 5.3 to AIX6.1


 
Thread Tools Search this Thread
Operating Systems AIX Upgrade AIX 5.3 to AIX6.1
# 8  
Old 10-09-2013
OK. let's get back to basics.
1. make a mksysb to be able to go back in case all else fails. Possible is that this mksysb image will want two disks to reinstall to. See below.

2. Unmirrorvg does not save a copy of rootvg - it removes it. After running the command reducevg rootvg hdiskX you will have a spare disk - hdiskX.

So, now there is a spare disk.

You could do a clean install onto hdiskX - assuming the hardware support AIX 6.1 (is it Power4 or newer?). You may be missing a lot of information from the other system - but at least you know AIX installs and runs.

So, now that you know AIX 6.1 installs - then if AIX 6.1 has the files needed to support alt_disk_install from AIX 4.3.3 then use the clone option to make the rootvg copy on hdiskX (overwriting the fresh install you just did) and then continue the process to do the migration.

If AIX 6.1 does not support alt_disk_install from 4.3.3 then you will need to make a second mksysb of the current configuration (only one disk in rootvg) and when that finishes, reboot from the mysysb image and restore to the spare hdiskX.

Now you have the same AIX installed twice (clone_copy the old slow way). Now reboot again using the AIX 6.1 media and follow the migration path to update to keep the information lost by the fresh install.

I hope this is all fairly clear - AND - that it helps! Smilie
# 9  
Old 10-09-2013
If you are talking about multibos (or alt_disk_install), you will change the bootlist when the system is up and running, then you reboot the system and it will boot off the upgraded/migrated version of OS.
After you had perform multibos operation, you will change the bootlist (hd5)
Code:
bootlist -m normal hdiskX blv=bos_hd5, where X=0,1,2,3 etc.., (root disk)

, this will change the bootlist to the one you just upgraded/migrated.

I have done it many times and it works, and you don't have to go to SMS menu to configure this.

I think the mksysb will take the multibos backup when they are mounted. ( Please correct if I am wrong).
# 10  
Old 10-11-2013
My worry would be that if I am not able to boot with the upgrade done (and it's a pretty strong case to revert really) I am not at a prompt that I can update the bootlist. How would I achieve it then? I guess that there is maintenance mode from CD, but I would still need to know the value to set for blv Do we know what multibos will generate?

It does seem like a neat process, especially where physical disks are limited. Personally, I would never risk reducing to a single copy of any LV unless it's on externally protected disks (RAID SAN LUNs etc.) because sod's law could apply.


Thanks for any more information.

Robin
# 11  
Old 10-11-2013
Say you upgraded and changed the bootlist, but for any reason the system ain't liking it, you can reverse the bootlist and reboot the system to go back to old version.

Now, to know which bootlist you booted off, you can do
Code:
bootlist -m normal -o, it will list you the current bootlist option

Here if you are seeing
Code:
blv

, as
Code:
hd5

, then you need to change the bootlist to
Code:
bos_hd5

or vice versa.
To change the bootlist you can use the syntax I mentioned in my previous posts.
This User Gave Thanks to ibmtech For This Post:
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

AIX 7.1 Upgrade problem

Hi all, I'm getting errors while booting AIX 7.1 after upgrade I have used FLRT tool for the process with the following input values shown in the attached photo. titled FLRT After reboot for the upgrade process system hangs and no response as shown in screenshot named AIX7.1-NormalBoot I... (13 Replies)
Discussion started by: h@foorsa.biz
13 Replies

2. Emergency UNIX and Linux Support

AIX upgrade fails

Hello Team, Am trying to upgrade the AIX 6.1 TL 7 to TL 8. My rootvg is mirrored so i have unmirrored and taken out the secondary disk and trying to install the update via smitty alt_clone. The filesets has been installed and finally when making the updated disk as bootable bosboot... (6 Replies)
Discussion started by: gowthamakanthan
6 Replies

3. AIX

AIX upgrade

i upgrade aix ml 5.3.2.1 to 5.3.2.2 but when running commnd #oslevel -r shows out put, again 5.3.2.1-- where should i chek??? 2-can any one tell me when mknfs command run which files get updated?? (2 Replies)
Discussion started by: nayyer
2 Replies

4. AIX

How to upgrade AIX Firmware & TL Maintenance Level in AIX

Steps to upgrade AIX TL ( technology Level ) / Maintenance Level in AIX ( including Firmware HMC VIOS ) This article or post covers upgrades for - Hardware Management Console ( HMC ) - Firmware ( also known as microcode ) - VIO ( Virtual I/O Server = PowerVM ) - AIX Version, Technology... (2 Replies)
Discussion started by: filosophizer
2 Replies

5. AIX

Upgrade from AIX 5.3 to 6.1

Hello Folks, i am facing some weired issues. case is like this :- initially i was on AIX 5.3 i have installed filesets related to my application and those were in APPLY state.(COMMIT is set as NO) Then i have taken lslpp -l| grep -i <apps name> in that i confirmed whether the filesets are... (1 Reply)
Discussion started by: harsh_mulay
1 Replies

6. AIX

UDB 9.5 upgrade from 8.2 on AIX 5.3

We are going from UDB DPF 8.2 to 9.5 and changing HW from P4+ to P6 and moving from 5.2 to 5.3. Anyone out there gone through this upgrade? Any words of wisdom, warnings, or other gotchas you could pass on. TIA. ART (0 Replies)
Discussion started by: ArtF
0 Replies

7. AIX

AIX Upgrade 5.2 to 5.3

I have an IBM P520 that I need to upgrade from 5.2 to 5.3. My background in Unix is from 15 years ago so I don't remember much. IBM documentation is hard to find. Any help would be appreciated. (1 Reply)
Discussion started by: bashtonmcse
1 Replies

8. UNIX for Dummies Questions & Answers

AIX Upgrade

Does anyone know any gotcha's on upgrading AIX from 5.1 to 5.3? Any interim steps on needs to do or ??? (3 Replies)
Discussion started by: capeme
3 Replies

9. UNIX for Dummies Questions & Answers

AIX ML upgrade

Hello everyone, I have to do a ML upgrade on AIX 5.2 from 01 to 09 this is the first time iam going to do it. are there any command i have to keep in mind?? thanks! (1 Reply)
Discussion started by: karthikosu
1 Replies

10. AIX

HELP for AIX 4.3 upgrade to 5.3

Hi guys I have joined a new department and one of my tasks is to investigate the feasibility of upgrading our current AIX v 4.3 to V5.3. I do not know anything about AIX and any actual work will be done by an outside consultant until such time as I have built up my own knowledge. The system we... (3 Replies)
Discussion started by: JDM
3 Replies
Login or Register to Ask a Question