Can anybody help me with regards to the driver of GXT250P graphics adapter. I have searched the web for the fileset devices.pci.14103c00 however no success was found. My current AIX version is 4.1.5 and my machine is 7043-140. My installation AIX CD is not working anymore, so I can't install the driver.
Anybody there who has this fileset? or site that I can download this driver? I will greatly appreciate your help.
I am trying to install this NVIDIA-Linux 64-260.19.04.run graphics card, it is a GeForce GTX460 EVGA. I have tried all the commands to turn off the Xserver yes I can get it off yes I can get to root prompt or sudo prompt in home directory but every time I use the sh NVIDIA-Linux 64-260.19.04.run... (0 Replies)
Hi Guys,
Anyone know any commands to verify the graphics card is installed correctly on an M4000?
show-displays just comes back and echoes nothing.
Also there is on input-device or output-device variable when you run printenv.
This in itself is worrying.
Any advice would be... (4 Replies)
Hi Gurus,
I'm trying to install Oracle on HP-UX 11.23. The Oracle installer needs an X server running on the box. You then start an X client on your PC, export the DISPLAY on UNIX and the installer displays on your PC. The problem is that my HP boxes do not have graphics cards installed. ... (6 Replies)
Hi,
I need to start the Xserver process in a domain of a E25K which has installed Solaris 8, however this domain doesn't have installed a graphic card, is this possible? Or is there any way to emulate this process?
In fact I don't know how to stop or start the Xserver process, is with... (5 Replies)
I am on an HP C8000 running B.11.11, I have no idea how to tell what graphics card I have...and the amount of memory it has, driver, etc. Also, how do I tell how much ram the box itself has, and other memory information like swap and processor speed and all that. Any help out there for me? ... (1 Reply)
Hi All -
I looked through this forum and a couple of other places without success. Maybe someone here can help. I very recently came into possession of a p520, a 9131-52A. It arrived without documentation, mouse, keyboard, or graphics card.
I managed to get ASMI to work on both DB-9 ports... (6 Replies)
I have a SuSE8.1 Linux box running as a testing webserver to my small network. It's administered through ssh and webmin entirely, and doesn't have a monitor.
I could really do with the graphics card for another machine, but if I take it out, I can't start the machine up.
Any ideas how I can... (6 Replies)
showfsets(8) System Manager's Manual showfsets(8)NAME
showfsets - Display information about filesets in an AdvFS file domain
SYNOPSIS
/sbin/showfsets [-b | -q] [-k] domain [fileset...]
OPTIONS
Lists the names of the filesets in a file domain, without additional detail. Displays the total number of blocks and the number of free 1K
blocks. Displays the quota limits for filesets in a domain.
OPERANDS
Specifies the full path name of the AdvFS file domain. Specifies the name of one or more filesets in the file domain.
DESCRIPTION
The showfsets command displays the filesets (or clone filesets) and their characteristics in a specified domain. The characteristics of a
fileset are: Fileset Identifier
A fileset identifier is a combination of the file-domain identifier and an additional set of numbers that identify the fileset
within the file domain. For example, the fileset identifier 2be95ef4.000a129.1.8001 consists of the following: 2be95ef4.000a129
1.8001 Clone status
The status items of a clone fileset vary, depending on the fileset. Status items can include: Clone is
Specifies the name of a clone fileset, if one exists for the parent fileset. Clone of
Specifies the name of the parent fileset, if the displayed fileset is a clone fileset. Revision
Specifies the number of times you revised a clone fileset. For example, if you recreate a clone fileset of the same parent fileset
three times, the revision value is 3. Files
Specifies the number of files in the fileset and the current file usage limits (quotas). SLim, the soft limit, is a quota that can
be exceeded for a fixed period of time and HLim, the hard limit, is a quota that cannot be exceeded. Blocks
Specifies the number of blocks that are in use by a mounted fileset and the current block soft and hard usage limits (quotas). For
filesets that are not mounted, zero blocks will display. For an accurate display, the fileset must be mounted. Quota Status
Specifies which quota types are enabled (enforced).
The showfsets command with the -q option set displays block and file information for a specified domain or for one or more named filesets
in the domain. The characteristics of a named fileset are: BF (block flag)
Specifies block (B) and file (F) usage limits. A + in this field means that the soft limit is exceeded; a * means that the hard
limit is reached. Block (512) Limits
Specifies the number of blocks used, the soft limit (the number of blocks that can be exceeded for a period of time), the hard limit
(the number of blocks that cannot be exceeded), and the grace period (the remaining time for which the soft limit may be exceeded).
File Limits
Specifies the number of files used, the soft and hard file limits for the fileset, and the grace period remaining.
Note
On a TruCluster Server, showfsets can sometimes report incorrect disk usage. Data in CFS client caches is synchronized to the server
at least every 30 seconds. The disk usage reported does not account for dirty data in client caches that has not yet been synchro-
nized to the server.
EXAMPLES
The following example shows the command line and resulting display for the showfsets command: # showfsets usr_domain
usr
Id : 2f1dabd6.00059d50.1.8001
Clone is : usr_clone
Files : 17644, SLim= 0, HLim= 0
Blocks (512) : 90582, SLim= 212000, HLim= 256000
Quota Status : user=on group=on
usr_clone
Id : 2f1dabd6.00059d50.3.8052
Clone of : usr
Revision : 82 The following example shows the command line and resulting display when the fileset quota option is set: #
showfsets -q test_domain
Block (512) Limits File Limits
Fileset BF used soft hard grace used soft hard grace
fileset1 +- 1750 1500 2000 11:32 35 300 400
SEE ALSO
Commands: chfsets(8), mkfset(8), rmfset(8)
File Formats: advfs(4)showfsets(8)