Inherited VIO server an LPARs


Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
Operating Systems AIX Inherited VIO server an LPARs
# 1  
Inherited VIO server an LPARs

Lucky me, someone has installed a server and got it running with the best intentions, but leaving me a headache. Smilie

We have a simple p520 with 4 disks. 2x145Gb & 2x300Gb. The smaller disk pair have been built into a VIO mirrored rootvg, and quite right too.

The other two disks form a volume group each (VIO storage pools). The plan was to ensure that disk allocated to the LPARs would be made in pairs, one from each user-volume group so that we would be confident at the LPAR that the hdisk definitions presented would be from different real media. The problem I now have is that we are adding more real disk (another 16x300Gb in a separate CEC) and add more LPARs.

So, should I create more volume groups on the VIO server (storage pools) on a one-disk-one-pool rule, or should I approach this another way. What would be nice would be a way to present the LPAR with a single device made from a mirror at the VIO server and enforcing strictness on the VIO server to make sure that the mirrors are on different real disks.

I feel that if/when we have a disk failure, I'm going to have a huge mess of failed hdisks in the various LPARs we will have and a huge overhead in logging and maintaining disk separation for all these LPAR hdisks and mirrors making sure that LPAR mirrors do not inadvertently end up on the same real disk as the primary copy, albeit a different hdisk that the LPAR sees.

Big question/headache I know. Any suggestions? Smilie



Robin
Liverpool/Blackburn
UK
# 2  
you know if you do it this way, than you loose everything if the vio server goes down ?

Apart from that why dont you just work with vscsi and redundant vio servers rather than with file backed IO - would make maintenance a lot easier I think ...
Regards
zxmaus
# 3  
That would be wonderful if there was an easy conversion path away from a single VIO server. I have what I have been given.

Should I be looking to unmirror the VIO rootvg, release the disk and then find a way to create another LPAR with dedicated access to the now spare disk? I'm afraid there has been no training and very lttle documentation on VIO.

I have a sinking feeling that you are going to tell me that there should be 2 VIO servers as hardware items segragated from the LPARs somehow. I'[ve tried the IBM website but it's either nothing or Ijust get swamped. I'm obviously not phrasing the search very well.

Given I have one p520 and four internal disks, what am I looking at?

Help! Smilie


Apologies if I'm being stupid and missing something obvious. Smilie




Robin
Liverpool/Blackburn
UK
# 4  
One or two VIO is largely a matter of what the Availability requirements of the server are. In general a Production environment should have dual VIO servers. In this config howeer I expect that the issue will be around the use of the Disk Adapters.

Each disk adapter can belong to exactly one LPAR (incl a VIO), so the existing arrangement probably only has one disk adapter - hence one VIO.

If you are buying a new CEC (or is it an I/O drawer? ) you will add at least one more Disk Adapter so you could go to twin VIO. That said its still recommended to mirror the rootvg even in that environment so now 4 disks would be taken up with VIO operating systems.

Even so you'd still be left with the headache of multiple LVs being allocated to each LPAR from each VIO server and the inevitable number of resyncs you'd need after a failure or reboot of a VIO.

The best solution in these kind of environments is to use a Fibre Channel SAN storage array that can then have LUNs connected to each LPAR via one or both VIO servers (depending how you implement it). In that way its the additional pathing that is redundant not the additional disk copy.

If you are going to stick with one VIO and all those new disks - try and get a RAID card so you can create a single RAID array with all the disks, that at least would ease the management of it as the RAID array will take care of keeping the 2 copies of data on separate disks. That said - the I/O performance of this environment will be very poor.

Quote:
I'm afraid there has been no training
This is criminal, drop me a PM and I may be able to point you in the right direction in the UK to close that skills gap.

cheers
Ross
Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #182
Difficulty: Medium
yq is a lightweight and portable command-line CSV processor.
True or False?

10 More Discussions You Might Find Interesting

1. AIX

Need to replace a broken PV in a VIO VG used for client LPARs (and it won't release the old one)

I have a broken PV in a VIO VG that's used to support client LPARs using LVs. On the client LPAR, I reduced all PVs from the relevant client VG and thus deleted it. I.e. there is no client LPAR using the VIO VG. Yet when I try to reducevg the VIO VG, it complains that the LV hosted on the PV is... (2 Replies)
Discussion started by: maraixadm
2 Replies

2. UNIX for Advanced & Expert Users

How to identify the blade from VIO server?

Hello, I would like to identify the blade or/and bladecenter from the hosted VIO server. I prefer the "command line" solution. May be kdb. Like, I want to ask the child about his father. Thank you (1 Reply)
Discussion started by: x41
1 Replies

3. AIX

VIO Server

Hi, I am facing an issue in vio server. When I run bosboot -ad /dev/hdisk0 I am getting an error trustchk: Verification of attributes failed: /usr/sbin/bootinfo : accessauths regards, vjm Please use code tags next time for your code and data. (8 Replies)
Discussion started by: vjm
8 Replies

4. AIX

Mirroring vio server

Hi, I would like to know installing vio server on local disk and mirroring rootvg, if I am creating AIX VIO CLIENT(lpar), and any of single local hard disk failuare. will it affect lpars? will lpars able to boot. what needs to be done? (1 Reply)
Discussion started by: manoj.solaris
1 Replies

5. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Discussion started by: newtoaixos
1 Replies

6. AIX

VIO server on p520

trying to put VIO server software into this p520, firmware upgraded to the latest and greatest..SF240_415_318 , I think a few questions, on this practice AIX machine on AIX 7.1 VIO can only be installed if ASMI or HMC is running ??? if so, perhaps ASMI is much simpler, since I will need to... (2 Replies)
Discussion started by: ppchu99
2 Replies

7. AIX

Identifying the vio server names

Hi My vio client is getting its virtual Ethernet services from dual vio servers. What command if I execute on the vio client will get me the names of the vio servers ? (2 Replies)
Discussion started by: samsungsamsung
2 Replies

8. AIX

vio server and vio client

Hi, I want to know wheather partition size for installation of vio client can be specified on vio server example If I am installing vio server on blade with 2*300gb hard disk,after that I want to create 2 vio client (AIX Operating system) wheather I can specify hard disk size while... (1 Reply)
Discussion started by: manoj.solaris
1 Replies

9. AIX

Virtual Ethernet VIO HMC LPARs

Hi, I am little confused about the virtual Ethernet configuration on VIO and Client Partitions. There is alot of info on the internet but it gets more confusing.... If I have LHEA, it is very simple. Just assign LHEA (logical host ethernet adapter) to client partition -> run smitty tcpip and... (10 Replies)
Discussion started by: filosophizer
10 Replies

10. SCO

Inherited server - need help

I have inherited admin duties on an old server running SCO Open Server 5. No changes have been made to this thing for a very long time. The server has started randomly disconnecting itself from the network. I have to reboot the server to get it to find the network again. It happens about once a... (3 Replies)
Discussion started by: jmickens
3 Replies

Featured Tech Videos