Tape drive problem - no process to read data written to a pipe
Hi Everyone,
The machine I'm working on is an AIX 5.3 LPAR running on a P650. oslevel -r shows 5300-08. I'm trying to take a backup to a SCSI tape drive, which has been working up until this point. I know of nothing that has changed recently to cause this problem. But when I try to take a backup to the tape drive now I receive this error:
When I run lsdev | grep rmt0 I receive this output and it says the tape drive is in an available state:
It is incorrect for the SCSI ID to be 0,0? Could that be the problem? I also noticed it says there is a permissions issue writing to /tmp, so I did a chmod 777 /tmp to give it full permissions but that didn't help either.
Please let me know if you have any ideas. I am new to UNIX and I'm not able to find much info on this error message. Also, I cannot call IBM because our support contract has expired.
Thanks
---------- Post updated at 04:40 PM ---------- Previous update was at 10:34 AM ----------
Hi Everyone,
It turns out this is a sysback configuration. When using Sysback (Tivoli TSM for System Backup and Recovery) I receive the error writing to tape. But using dd, tar, and mksysb I am able to write to the tape drive just fine.
If anyone has advice on how to configure a tape drive in Sysback, that would be much appreciated because I can't seem to figure it out. If not, I am going to go the mksysb route.
Thanks
Last edited by Scott; 03-02-2010 at 02:12 PM..
Reason: Please use code tags
Hello,
I need to read the pipe data as:-
cat abc.txt | uuencode abc.txt | mailx -s hi xyz@xyz.com
I will override the mailx function so that when mailx is called, it calls my version of maix and in that function I want to read the file which is attached in progional mailx function- abc.txt... (7 Replies)
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
We use SAP application cluster on AIX. Communication between 2 of its instances is failing randomly with the following error:
java.net.SocketException: There is no process to read data written to a pipe.
The above error causes a cluster restart if an important communication fails.
Can... (0 Replies)
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Hi,
I'm at AIX 5.3.
My EOD program is giving following error while writing to tape:
Can't write output
cpio: Media Surface error
Failed on Shell-script
cd /; cpio -ocB 2 >> /autoline/misc/logs/bk.CopyToTape < /autoline/work/BACKUP.01022 1>/dev/rm0
I have tried with several new tapes,... (2 Replies)
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
I have the following code which works on AIX 4.3 but fails at times on AIX 5.3
with:
cat: 0652-054 cannot write to output. There is no process to read data written to a pipe.
validator="${validator_exe} ${validator_parms}"
cmd_line="${CAT} ${data_file} | ${validator}... (6 Replies)
Dear all,
I have ultriam3 tape. It is connected my LPAR. I have that the Sl.Nos. and slot number. but run the cfmgr i am not getting the tape drive.
I have fired the command lsdev -Cc tape but no reply.
how will i configure the tape in LPAR?
Please suggest. It is very urgent. (3 Replies)
I replaced a HP Superstore Dat 40 with another HP Superstore Dat 40, but my backupedge software keeps putting up error code 1 (device not found) I have tried reinstaling the drive as DAT Alad stp 0 6 0 0. I'm not a computer expert but willing to have a go. I went into Backupedge to try and format a... (2 Replies)
I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command...
tar tvf /dev/rmt0
...and I keep getting the following error message:
tar: 0511-193 An error occurred while reading from the media.
There is not enough memory available now.
I've googled this error... (2 Replies)