I have N number of AIX hosts, where I need to login frequently and do some routine tasks (run some scripts). I need to setup ssh public/private key, so I can auto-login via a master (wrapper) script and run each script in each server.
I am trying to setup/generate ssh keys, but am facing some problems. Here's what I have done:
- Generate ssh keys, as follow:
- So now id_rsa.pub is copied over to my host2:/home/haroon_a/.ssh/.
- When I try to do an ssh login either from host1 to host2 or from host2 to host1, the ssh login doesn't work. It still asks me for password.
- Can someone tell me what I'm missing here?
Thanks in advance.
Haroon A.
---------- Post updated at 11:03 AM ---------- Previous update was at 10:19 AM ----------
I got the ssh auto-login to work. But here's my other question now:
- Like I mentioned, I have N number of hosts, where I need to run some scripts on a regular basis. So, here's what I have in mind.
1. Create a script in host1 to wrap arround all other scripts in other hosts (host2, host2, host4) and execute each scripts in all other hosts. i.e. something like this:
But as soon as the ssh host2, is executed--the first line--, then I am taken to host2, and I'm out of the script (which is in host1).
the good news - your script works It does exactly what you tell it to do.
The bad news - if you want just remote execution you should rather use the rsh command facilities rather than ssh and than pull the output. Obviously bad for security.
the good news - your script works It does exactly what you tell it to do.
The bad news - if you want just remote execution you should rather use the rsh command facilities rather than ssh and than pull the output. Obviously bad for security.
Kind regards
zxmaus
Thanks for the hints and advise. I'll look into rsh.
In the meantime, I am working on my script, and want to re-use portions of my code (BTW, I'm not an expert in shell scripting), so I decided to use a function. So, here's what I'm trying to use function, but I can't get it to work, Please bare with me.
However, when I run my script, it says:
The rest of the script gets executed.
In the shell script, printThisWord () {...} needs to come before you first try to call printThisWord.
On the ssh side, you can run commands remotely as follows:
Thanks you. It worked, when I moved the function before its call.
I have another question:
I want to cancatenate value of some variables, and pass it to another functin. i.e.
But when I run my script, the output is only the first line, rather the first word. I guess it does it because $1 is for the first argument, and hence it only takes "some" in this case.
Can someone tell me how to pass value of $msgs which is 3 lines into a function and read the entire value (3 lines) from within my function?
The reason is you do not protect your variable by quoting it:
should do the trick. You might have to quote the variable inside the function too to preserve its contents. It is generally good style to quote as exactly as possible, even if it is not absolutely necessary.
[Moderator-mode on] Please notice that we do not have a shortage in thread slots here, so please open a new thread if you have a new question.
We are trying to build a knowledge base. That means, if some other user has the same problem like you ideally he should be able to find the solution without having to ask the question again, just by searching the forum.
Having several independent problems discussed in a single thread does not further this cause, because a user with your shell problem is likely not searching for a thread about ssh configuration.
Nobody will think bad about you if have several different problems and open several different threads, one for each of them. Quite contrary this is what we ask you to do.
Another point is forum specialization: you might notice that there are different parts of the forum, one for AIX and one for shell programming for instance. Sometimes it is difficult to decide where a thread should go, but in this case it would have been easy, but now we have a thread which deals with two (or three) different problems and each part would belong to a different part of the forum.
I hope you understand and i ask you follow these forum behavior standards more carefully in the future. Thank you.
[/Moderator Mode off]
The reason is you do not protect your variable by quoting it:
should do the trick. You might have to quote the variable inside the function too to preserve its contents. It is generally good style to quote as exactly as possible, even if it is not absolutely necessary.
[Moderator-mode on] Please notice that we do not have a shortage in thread slots here, so please open a new thread if you have a new question.
We are trying to build a knowledge base. That means, if some other user has the same problem like you ideally he should be able to find the solution without having to ask the question again, just by searching the forum.
Having several independent problems discussed in a single thread does not further this cause, because a user with your shell problem is likely not searching for a thread about ssh configuration.
Nobody will think bad about you if have several different problems and open several different threads, one for each of them. Quite contrary this is what we ask you to do.
Another point is forum specialization: you might notice that there are different parts of the forum, one for AIX and one for shell programming for instance. Sometimes it is difficult to decide where a thread should go, but in this case it would have been easy, but now we have a thread which deals with two (or three) different problems and each part would belong to a different part of the forum.
I hope you understand and i ask you follow these forum behavior standards more carefully in the future. Thank you.
[/Moderator Mode off]
I hope this helps.
Absolutly correct, bak! That simple, yet important--at least in my case--trick, did the job. Thanks alot.
Hi i am using solaris 10.I am trying to setup a public/private key but it is not working.Appreciate your repsonse on it
There are two servers DB1 server and DB2 server.
1)I have generated public/private key using below step on both servers.
ssh-keygen -t rsa
2)From DB1 server moved the... (6 Replies)
My password-free ssh connection has worked in the past but has stopped working and I can't get it going again.
The files in .ssh on both source and target are set to 600:
drwx------ 2 ingres 1024 Mar 2 13:57 .
drwxr-xr-x 25 ingres 2048 Mar 29 09:38 ..
-rw------- 1 ingres ... (9 Replies)
Hi,
please guide me create a public/private key using ssh-keygen, lets say I have been access to server named pngpcdb1with a userid and password ...!!! and also please explain in detail the concept of these keys and ssh as I was planning to use them in ftp related scripts..! Thanks in... (1 Reply)
Hi, I've used the following way to set ssh public key authentication and it is working fine on Solaris 10, RedHat Linux and SuSE Linux servers without any problem. But I got error 'Server refused our key' on Solaris 8 system. Solaris 8 uses SSH2 too. Why? Please help. Thanks.
... (1 Reply)
Hi All;
I have an issue with password less authentication via ssh ( v2)
I have two servers Server A and Server B, following are the server details
Server A
OS - HP UX B.11.11 U 9000/800
SSH - OpenSSH_4.3p2-hpn, OpenSSL 0.9.7i 14 Oct 2005
HP-UX Secure Shell-A.04.30.000, HP-UX... (3 Replies)
I am writing a script that needs to access various servers some of which are not ssh enabled. In order to access the ssh enabled servers I am using the following command to generate the public key :
ssh-keygen -t rsa
Is there a similar command for the other servers as well.
If I try to use... (1 Reply)
I am writing a script that needs to access various servers some of which are not ssh enabled. In order to access the ssh enabled servers I am using the following command to generate the public key :
ssh-keygen -t rsa
Is there a similar command for the other servers as well.
If I try to use... (1 Reply)
Hi,
I am trying to scp a file from our Unix server to the local Windows machine.I have created the key pair in Unix server using ssh-keygen command in unix.
But I am not sure where can we put the public key(generated on Unix) in Windows machine so that scp from Unix machine to Windows is... (3 Replies)