11-16-2005
Depends on OS... For example, on Redhat (RHEL, CentOS, FC) systems /etc/sysconfig/network-scripts/ifcfg-eth0 will have a GATEWAY=<some_ip_address> assignment.
Which distro are you using?
Cheers
ZB
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
How can I change the gateway address on my sco Openserver 5.0.6. A cisco firewall is recently installed but the gateway on the system is still pointing at the old one.
I want it to use the gateway address of the router.
Please help. Thanks (2 Replies)
Discussion started by: sshokunbi
2 Replies
2. IP Networking
I used "route" to add the default gateway
I wrote this:
route add default 19x.x.x.x 0
but this is not permanent default gateway.
Do I need to use another command?
Thank a lot (2 Replies)
Discussion started by: lmena
2 Replies
3. Programming
how we can get the gateway address.
i know gethostname used for ipaddress
how we can get the system gateway address.
thank u inadvance,
sree (2 Replies)
Discussion started by: phani_sree
2 Replies
4. SCO
Hy everybody !
I'm new on your forum, i'm french and don't speak a good english, so scuse me please for it !
I would to know how modify a gateway on a SCO 5.06
We have a problem, we have multi "beach" adress, one is 192.1.1.x, an other is 192.1.4.x
Actually, the computer on 192.1.4.x... (2 Replies)
Discussion started by: LB59
2 Replies
5. AIX
Dear folks,
How can delete the gateway from smitty or by command, Because I have 2 gatway in the system and I tried to delete by smitty it gave me failed command (7 Replies)
Discussion started by: magasem
7 Replies
6. AIX
Hi,
I have two interfaces on m AIX 5.3 box. One going to 192.168.1.x and it has a gateway of 192.168.1.1.
I configured the other gateway with 192.168.2.x and the default gateway as 192.168.2.1. But I can't get connectivity to the 192.168.2.1 network. Can someone help me out and let me know... (7 Replies)
Discussion started by: bbbngowc
7 Replies
7. Solaris
Hi all,
Just now i had change the gateway for a server
Go to /etc/defaultrouter, change to 10.86.33.1
route delete default 10.86.39.222
route add default 10.86.33.1
now cannot telnet to the server already..
any idea? (5 Replies)
Discussion started by: SmartAntz
5 Replies
8. AIX
Hello,
I am new to Unix :D and have been trying to configure an AIX server running 5.3. I used smitty or smit to configure interface 0 on the server. I am able to ping the IP I set, however I am still unable to ping the gateway. I configured the IP by navigating to Communications Applications... (6 Replies)
Discussion started by: cdub50
6 Replies
9. Linux
Dear Sir
I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper.
I am having a problem, configuring static call routing on GNUGK
in the section
... (0 Replies)
Discussion started by: mfondoum
0 Replies
10. UNIX for Beginners Questions & Answers
Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies
LEARN ABOUT SUSE
ifservices
IFSERVICES(5) Network configuration IFSERVICES(5)
NAME
ifservices-* - control network services with ifup/down
SYNOPSIS
/etc/sysconfig/network/ifservices-<configuration_name>/
DESCRIPTION
The directory /etc/sysconfig/network/ifservices-<configuration_name>/ is read by the script /etc/sysconfig/network/scripts/ifup-services
which starts and stops system services when an interface is set up/down. ifup-services is used by /sbin/ifup, which is the command line
user interface for setting up network interfaces.
This is useful if you don't have a permanent network connection. If you sometimes boot without network and plug in the network cable later
you can add links to system services in this directory. These services will then be started with ifup and stopped with ifdown.
The configuration name used for ifservices-* should match exactly the configuration name of the ifcfg-* file for the interface.
For the usage with NetworkManager (where you don't necessarily need a ifcfg-* file) you can also use /etc/sysconfig/network/ifser-
vices-<interface>-<essid>/ (for wlan interfaces) or if that does not exist /etc/sysconfig/network/ifservices-<interface>/. As a final
fallback /etc/sysconfig/network/ifservices/ is checked as well. If NetworkManager is active services will be stopped after the interface is
down.
The links in this directory are equal to the links in the runlevel directories /etc/init.d/rc*.d/ They have to point to service start
scripts which are usually in /etc/init.d/. Links starting with 'S' are start links, which are called in alphabetical order after ifup has
set up the interface. Links starting with 'K' are kill links which are called before ifdown takes down the interface. See also section
Sequencing Directories in boot (7).
EXAMPLE
In this example we use an interface with MAC address 00:de:ad:be:af:00. This interface is not always physically connected. As soon as you
plug in the cable ypbind and autofs should be started. When you pull the cable they should be stopped. This can be reached with:
in file /etc/sysconfig/network/ifcfg-eth-id-00:de:ad:be:af:00
...
STARTMODE=ifplugd
...
in dir /etc/sysconfig/network/ifservices-eth-id-00:de:ad:be:af:00/
S10portmap -> /etc/init.d/portmap
S20ypbind -> /etc/init.d/ypbind
S30autofs -> /etc/init.d/autofs
S20autofs -> /etc/init.d/autofs
K30ypbind -> /etc/init.d/ypbind
Now you have to disable the start of this services at boot time
chkconfig ypbind off
chkconfig autofs off
Notes:
You may call scripts/create-ifservices-directory [<interface_name>] to create a directory with the links from this example. This will cre-
ate the directory ifservices-<interface_name> or if no interface name was given ifservices-template.
Maybe you have to add also variable IFPLUGD_PRIORITY. For details about startmode ifplugd read ifup (8).
The service portmap had to be added because ypbind needs it. This service is still started at boot time because it does not need an active
network connection. But ypbind may now be started earlier as usual. Therefore we make sure that portmap is started before. Starting an
already running service again does not affect the service.
SEE ALSO
ifup(8), ifcfg(5).
AUTHOR
Christian Zoz <zoz@suse.de>
sysconfig February 2005 IFSERVICES(5)