01-07-2004
But you don't have a tape that was written by an earlier run of cpio. Try to write a tape, not read one.
You will need to put a tape in the drive and make sure that it is writable. For 8mm, there is a little tab that you slide open to make the tape writable.
And tar is much more simple than cpio. Try that tar command RTM gave you. Once you have that working you can move on to cpio if you really must.
8 More Discussions You Might Find Interesting
1. AIX
Currently I have a Dell Ultrium LTO 2 Tape Drive. I am going to have a IBM AIX server. Just wonder if it is possibe to connect this tape drive to the aix server? I have Brightstor Arcserver installed on another win 2003 server. Is it possible to install the arcserve agent on the aix and use the... (1 Reply)
Discussion started by: ming413
1 Replies
2. AIX
I've just landed in a situation where an old IBM RS/6000 7025 F40 running AIX 4.2.1 has had it's tape drive fail. The tape drive in question is an HP C1533A 4mm 4GB/8GB DAT drive. It repeatedly gets write failures, and my trusty techique of whacking the cleaning tape in hasn't worked. Unfortunately... (2 Replies)
Discussion started by: phaedrus
2 Replies
3. AIX
Hi,
Help required!
How to mount internal tape drive of sun machine in AIX 5.3 (0 Replies)
Discussion started by: ashwin.krishna
0 Replies
4. AIX
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Discussion started by: Caully
4 Replies
5. AIX
I am trying to use this command to eject the tape
mt -f /dev/rmt/0 unload
but it gives me error
mt -f /dev/rmt/0 unload
mt: 0511-575 unload is not a recognized subcommand.
Usage: mt Subcommand
Valid subcommands are:
weof
eof
fsf
bsf
... (5 Replies)
Discussion started by: filosophizer
5 Replies
6. AIX
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
Discussion started by: AixNoob87
2 Replies
7. AIX
Hi
I need to make some restore tapes for our old AIX systems
I have purchased some DDS2 tapes and cleaning tapes
The tape drive is rmt0
what commands can I enter to run the cleaning tape through the drive
and are the any commands I can enter to test these drives
prior to using... (2 Replies)
Discussion started by: madmacher
2 Replies
8. HP-UX
I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Discussion started by: Randydog
10 Replies