Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Mandrake 7.2 Installation
Top Forums UNIX for Dummies Questions & Answers Mandrake 7.2 Installation Post 30405 by onestepto on Monday 21st of October 2002 07:59:32 PM
Old 10-21-2002
Mandrake multi
Hi LivinFree,
I've redone a hardware check and all is working ok, or that's what the box says. All drives are set to master as it's set up to multiboot with the windows' drives connected normally to the motherboard and the Linux one connected via an scsi controller.

All drives are visible in BIOS and windows recognises them all. XP partitioned the 80 into two 37's so I have E:\ for Mandrake, and F:\ for development of a second Linux o/s when I learn enough from the first installation.

The hardware installation was done with a tech who knew what I wanted to do with the system and a phone call to him has verified the above.

The problem is that 7.2 won't/can't recognise the scsi controler that I have - it's not listed when I get to choose an scsi device in custom install. And I can't find it listed on any hardware compatability charts for 7.2. I bought the card on Saturday and it seems that it is too new for 7.2. My tech (who gave me 7.2) says I may need to wait for 9.0 (my CD's are about two weeks away) but I was hoping to get the Penguin (any Penguin) happening straight away.

That's why I was wondering: what would be the situation if I connect a win drive to the scsi controller and the intended Linux drive directly to the motherboard?
Regards
 

10 More Discussions You Might Find Interesting

1. UNIX Desktop Questions & Answers

Mandrake 8.1

Hi all, I have copied three .ISO files for Mandrake 8.1 from a Linux DVD onto my work LAN. They are: Mandrake81-cd1-inst.I586.iso Mandrake81-cd2-ext.I586.iso Mandrake81-cd3-supp.I586.isoThey're all +650M in size and I'd like to know what I need to do in order to create the three CD's... (3 Replies)
Discussion started by: Cameron
3 Replies

2. UNIX for Dummies Questions & Answers

mandrake installation

I have downloaded from www.linux-mandrake.com and have got everything as separate files. My question is how do I know which to put on which cd's? one of the folders is over 1.5 gig so how do I know? and I can't just download the ISO's it takes ages for me to download. ty (4 Replies)
Discussion started by: darryll777
4 Replies

3. UNIX for Dummies Questions & Answers

mandrake 7.0 and X

I have problems. I have to use Mandrake 7.0 for a college course and I have it installed and I can do all the command line stuff, but I want to get to the GUI. Problem is, I can't start X. SO, after doing some searching on google, I downloaded XFree86 4.0.1 and the latest driver for my video... (2 Replies)
Discussion started by: ober5861
2 Replies

4. UNIX for Dummies Questions & Answers

mandrake and os X

can i run mac os X stuff in mandrake? on a intel computer? (1 Reply)
Discussion started by: amicrawler
1 Replies

5. UNIX for Dummies Questions & Answers

Mandrake

I read the old posts about dual booting windows and linux, and I just wanted to clarify something: If I buy the mandrake version of linux, will that by itself partition the hard drive, or do I still have to get a copy of partition magic? If the mandrake version can do it, is it an easy process? ... (6 Replies)
Discussion started by: luke314pi
6 Replies

6. UNIX for Dummies Questions & Answers

need help mandrake os

my hdd root dir keeps dumping on me but when i install i use native linux format i i lost again yesterday is there a recovery methead? or a safe mode that i can go into ? i made a boot disk is it wise to let the formater program to auto alcate? give me a 5gb root drive and a 37gb home i relly... (1 Reply)
Discussion started by: amicrawler2000
1 Replies

7. UNIX for Dummies Questions & Answers

mandrake 10

i just got mandrake 10 and i installed xine the latest why does it crash my xserver and how do i fix this problem in mandrake 8 - 9.2 i had no problmes with xine until now with 10 (2 Replies)
Discussion started by: amicrawler2004
2 Replies

8. SuSE

mandrake problem

ihave mandrake 9.2 (will upgrade soon to 10) but anyways, i can't get the Hard drive or the CD-ROM or Floppy to show up on the desktop. can anyone help me out? (11 Replies)
Discussion started by: linux_newbe
11 Replies

9. Linux

mandrake

I just installed mandrake 9.2, and all I want right now is for gaim to allow me to use msn.. The version I got now is 0.59.? and I have tried to get the latest version but when I downloaded the rpm it said that there were errors... can someone help... for my rpm packaging I have went to Urpmi and... (3 Replies)
Discussion started by: flimzzy
3 Replies

10. Linux

Mandrake 8.00 installation/Booting problem...Plz Help

Hey everyone, I'm new to the forum. I have a problem with Mandrake 8.00; i have installed it on my old PC with no problems (none mentioned) but on re-booting after the installation it just hangs after listing the devices: Hard Disk, CD-ROM & Floppy A. I have installed it on Packard Bell with... (2 Replies)
Discussion started by: sybella1
2 Replies

LEARN ABOUT REDHAT

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home
       page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ .

SEE ALSO

       mt(1),mtx(1),scsitape(1)

								    TAPEINFO1.0 						       TAPEINFO(1)
All times are GMT -4. The time now is 08:21 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy