hi. I am newbie in Unix. I wanted to install Free BSD 5.2.1 to my computer which winXp was already installed. But i couldn't.
I chose Standard. Then it said you are going to use dos style fdisk partitioning. Then a window displayed begining like this.
WARNING: A geometry of 155127/16/63 for... (0 Replies)
helo my sysem is running on redhat 9.
now i want to take data from redhat 9 pc to pen drive.
but when i plug it it is not detected.
can u tell me how to mount pendrive on redhat9.
amit (1 Reply)
Hello there,
My mulithreaded application (which is too large to represent the source code here) is crashing after installing FreeBSD 7.1-RELEASE/amd64.
It worked properly on others machines (Dual Cores with 4GB of RAM - FreeBSD 6.2-RELEASE/i386).
The current machine has 2x Core 2 Duo... (1 Reply)
Hi all,
Can anybody help me with how I can connect a usb pendrive or external disk to a Sun Server which runs on Solaris 9? I am able to connect the usb drive to a windows server easily and copy files but am wondering if it is possible to do that with Solaris.
Any help will be appreciated. thanks. (3 Replies)
Hi,
I am using compaq t5207tu model with 60gb harddisk and 2.5gb RAM.Its dual boot-Windows XP and Solaris. I tried installing SUN xVM on solaris to make client -server architecture (32 bit processor and 32 bit OS ) -guest OS (solaris 10)on host OS(Solaris 10). But whenever i try to install... (1 Reply)
Hi Gurus,
in linux I am unable to access my pendrive(i am even not seeing the icon or location for my pendrive ).
Please anyany could help me to get rid of this issue.
regards,
Sanjay
:) (4 Replies)
Holla,
I have been trying to install a recent distro, with a minimum X such as jwm, but unfortunately my cdrom is broken and I can only boot the USB port, with a pendrive.
AMD K6 3D is today too old for being for linux.
Is there an image of slackware than runs that processor and that can... (5 Replies)
I've "installed" LM 19.1 to a PNY 16Gb(2.0) pendrive. I have a few issues that I'd like to resolve. First and foremost, the O.S. experiences "lagging" issues and to a lesser degree, freezing. Example: Complete "boot-up" (from start to complete "home" page) can take upwards of 7 mins. Then when... (10 Replies)
Discussion started by: 69Rixter
10 Replies
LEARN ABOUT SUNOS
socal
socal(7D) Devices socal(7D)NAME
socal - Serial Optical Controller for Fibre Channel Arbitrated Loop (SOC+) device driver
SYNOPSIS
socal@sbus-slot,0
DESCRIPTION
The Fibre Channel Host Bus Adapter is an SBus card which implements two full duplex Fibre Channel interfaces. Each Fibre Channel interface
can connect to a Fibre Channel Arbitrated Loop (FC-AL).
The socal device driver is a nexus driver and implements portions of the FC-2 and FC-4 layers of FC-AL.
FILES
/kernel/drv/socal ELF Kernel Module
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC |
+-----------------------------+-----------------------------+
SEE ALSO sbus(4), sf(7D), ssd(7D)
Writing Device Drivers
ANSI X3.230-1994, Fibre Channel Physical and Signalling Interface (FC-PH)
ANSI X3.272-1996, Fibre Channel Arbitrated Loop (FC-AL)
Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)
DIAGNOSTICS
The messages described below may appear on system console in addition to being logged.
On the console, these messages are preceded by:
socal%d: port %a
where %d is the instance number of the socal controller and %a is the port on the host adapter.
Fibre Channel Loop is ONLINE
The Fibre Channel loop is now online.
Fibre Channel Loop is OFFLINE
The Fibre Channel loop is now offline.
attach failed: device in slave-only slot.
Move soc+ card to another slot.
attach failed: bad soft state.
Driver did not attach, devices will be inaccessible.
attach failed: unable to alloc xport struct.
Driver did not attach, devices will be inaccessible.
attach failed: unable to map eeprom
Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to map XRAM
Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to map registers
Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to access status register
Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to install interrupt handler
Driver was not able to add the interrupt routine to the kernel. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to access host adapter XRAM
Driver was unable to access device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: unable to write host adapter XRAM
Driver was unable to write device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
attach failed: read/write mismatch in XRAM
Driver was unable to verify device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible.
SunOS 5.10 9 May 1997 socal(7D)