Visit The New, Modern Unix Linux Community

Operating Systems Solaris Hardware RAID on Solaris-10 disk Post 303046063 by solaris_1977 on Wednesday 22nd of April 2020 04:03:21 PM
Hardware RAID on Solaris-10 disk

Hello,

I am not able to figure out if the disk is in mirror or not (hardware RAID). c1t1d0s0 is the one, which I need to replace, as this one is in the failing state.
Code:
solaris-10-priv#df -h /export/u02
Filesystem             size   used  avail capacity  Mounted on
/dev/dsk/c1t1d0s0      275G   266G   6.4G    98%    /export/u02
solaris-10-priv#echo | format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <Sun-STKRAIDINT-V1.0 cyl 17831 alt 2 hd 255 sec 63>
          /pci@0/pci@0/pci@9/scsi@0/disk@0,0
       1. c1t1d0 <Sun-STKRAIDINT-V1.0 cyl 36417 alt 2 hd 255 sec 63>
          /pci@0/pci@0/pci@9/scsi@0/disk@1,0
       2. c1t2d0 <Sun-STKRAIDINT-V1.0 cyl 36418 alt 2 hd 255 sec 126>
          /pci@0/pci@0/pci@9/scsi@0/disk@2,0
Specify disk (enter its number): Specify disk (enter its number):
solaris-10-priv#iostat -En | grep Hard
c1t0d0           Soft Errors: 2 Hard Errors: 1 Transport Errors: 59
c1t1d0           Soft Errors: 0 Hard Errors: 342 Transport Errors: 0
c1t2d0           Soft Errors: 2 Hard Errors: 1 Transport Errors: 10
c0t0d0           Soft Errors: 2 Hard Errors: 0 Transport Errors: 0
solaris-10-priv#

solaris-10-priv#raidctl -l
Controller: 2
solaris-10-priv#raidctl -l 2
Controller      Type            Version
----------------------------------------------------------------
c2              LSI_1068E       1.27.00.00
solaris-10-priv#

raidctl on that disk doesn't work, which I thought should work
Code:
solaris-10-priv#raidctl -l c1t1d0
Controller device can not be found.

solaris-10-priv#

Please suggest.

Thanks
---------UPDATE--------------
Didn't realized, I was supposed to use "/opt/StorMan/arcconf getconfig 1"
I am good now :-)

Last edited by solaris_1977; 04-22-2020 at 05:52 PM..
These 2 Users Gave Thanks to solaris_1977 For This Post:
 
Test Your Knowledge in Computers #325
Difficulty: Medium
Early RAM was not directly seated onto the motherboard so it could easily changed and upgraded.
True or False?

9 More Discussions You Might Find Interesting

1. Solaris

Hardware RAID

I don't understood why on SPARC-Platforms have not present RAID-Controller ? Sorry for my bad english, but it's crazy always setup software RAID !!! I whanna Hardware RAID and when i can find solution ? (7 Replies)
Discussion started by: jess_t03
7 Replies

2. Solaris

how to hardware RAID 1 on T5120

Hi, I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1" The System did come preinstalled as it comes from sun. I did not do much on it. I booted system using boot cdrom -s gave format... (6 Replies)
Discussion started by: upengan78
6 Replies

3. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help. (2 Replies)
Discussion started by: presul
2 Replies

4. Solaris

Hardware Raid - LiveUpgrade

Hi, I have a question. Do LiveUpgrade supports hardware raid? How to choose the configuration of the system disk for Solaris 10 SPARC? 1st Hardware RAID-1 and UFS 2nd Hardware RAID-1 and ZFS 3rd SVM - UFS and RAID1 4th Software RAID-1 and ZFS I care about this in the future to take... (1 Reply)
Discussion started by: bieszczaders
1 Replies

5. Solaris

how to check for hardware layered raid in solaris 10 ?

hi all, will command metastats tell whether there is hardware layered raid ? i intend to do patching and plug out one of the disks in case the one inside encountered issues. (1 Reply)
Discussion started by: Exposure
1 Replies

6. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My... (4 Replies)
Discussion started by: KhawHL
4 Replies

7. Solaris

Hardware RAID not recognize the new disk [Sun T6320]

We have hardware RAID configured on Sun-Blade-T6320 and one of the disk got failed. Hence we replaced the failed disk. But the hot swapped disk not recognized by RAID. Kindly help on fixing this issue. We have 2 LDOM configured on this server and this server running on single disk. #... (8 Replies)
Discussion started by: rock123
8 Replies

8. Solaris

[solved] How to blink faulty disk in Solaris hardware?

Hi Guys, One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
Discussion started by: manalisharmabe
9 Replies

9. Solaris

Hardware raid patching

Dear All , we have hardware raid 1 implemented on Solaris Disks. We need to patch the Servers. Kindly let me know how to patch hardware raid implemented Servers. Thanks... Rj (7 Replies)
Discussion started by: jegaraman
7 Replies
install-solaris(1M)													       install-solaris(1M)

NAME
install-solaris - install the Solaris operating system SYNOPSIS
install-solaris install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation, install-solaris invokes either a text-based installer or a graphical installer. The following minimum requirements for physical memory dictate which features are available during installation: For SPARC machines: 128 MB Minimum physical memory for all installation types 128 MB Minimum physical memory required for windowing system 384 MB Minimum physical memory required for graphical-based installation For x86 machines: 256 MB Minimum physical memory for all installation types 256 MB Minimum physical memory required for windowing system 512 MB Minimum physical memory required for graphical-based installation In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea- tures available. install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more details. install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the installation media. Refer to the for disk space requirements. Refer to the for more information on the various menus and selections. See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcdrom (Solaris instal- | | |lation media) | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ pkginfo(1), install(1M), pkgadd(1M), attributes(5) It is advisable to exit install-solaris by means of the exit options in the install-solaris menus. 23 Sep 2005 install-solaris(1M)

Featured Tech Videos

All times are GMT -4. The time now is 02:37 AM.
Unix & Linux Forums Content Copyright 1993-2020. All Rights Reserved.
Privacy Policy