Visit Our UNIX and Linux User Community

Operating Systems AIX AIX server problem - network connection is unstable ! Post 303045117 by bobochacha29 on Thursday 12th of March 2020 08:36:19 AM
Old 03-12-2020
Quote:
Originally Posted by zxmaus
ok - so you have some link aggregations with 100/1000 and some with 10G adapters. The 10G will almost always be faster. Considering how many 10G ports you have on your box, you may want to consider to move all of them to 10G instead? That would make tuning your network much easier.

If / when you do this, after long and exhausting RAC testing on our systems (similar hardware), we have found below network tunables to be the most beneficial for us. But be careful - do not change all of them at once - but one by one and see if your performance gets better, worse or remains the same.
You can change them via no -p -o name=value - note there is NO space before and after the equal sign in the command to change them.

Code:
hstcp = 1
lo_perf = 1
rtentry_lock_complex = 1
sack = 1
sb_max = 33554432
tcp_ephemeral_high = 65535
tcp_ephemeral_low = 32768
tcp_init_window = 16
tcp_nodelayack = 1
tcp_recvspace = 8388608
tcp_sendspace = 8388608
udp_ephemeral_high = 65535
udp_ephemeral_low = 32768
udp_recvspace = 655360
udp_sendspace = 65536

in addition, you probably want to put this into your /etc/netsvc.conf
hosts=local,bind4
Thank a lot for your help. Could you show me a little bit about your system, somethings like server's system model, OS version and Oracle version, so I can see how your system is similar to ours.

Cause our system is online now, it's dangerous to change something, so we need to be sure of what to do. Thanks againSmilie
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

FTP connection problem on new server

Solaris Server (V880) version 8 Brand new box just installed O/S, what do I need to do in order to get FTP working. I have updated the /etc/hosts.equiv file Problem - When trying to ftp to the server I get a login incorrect message, this is with the root user. Are there some... (1 Reply)
Discussion started by: miredale
1 Replies

2. UNIX for Dummies Questions & Answers

Network connection problem in unix

I have a network connection problem in unix. I am trying to access to LAN in unix but unfortunately it doesn't work. For example, if I ping from Unix to windows it says 'the network is unreacable'. Also, I can't ping in windows to unix. I would be glad if someone could help me. Thanks. ... (5 Replies)
Discussion started by: fatihshen
5 Replies

3. Cybersecurity

Enable SSH for root over certain network connection of a server...is it possible?

Hi - I have a SUSE Enterprise Linux Server V9 that I have an issue with. Policy says that root connectivity via ssh needs to be disabled. So, to do that, I made the following change in the sshd_config section: # Authentication: #LoginGraceTime 2m #PermitRootLogin yes PermitRootLogin no... (3 Replies)
Discussion started by: cpolikowsky
3 Replies

4. Solaris

Server unexpectedly closed network connection error in passwordless in ssh through

Hi , when i try to passwordless connection login in ssh through putty, i am getting the "Server unexpectedly closed network connection" error.i have already finished the public and private key settings for the particular user. thanks MaroV (1 Reply)
Discussion started by: vr_mari
1 Replies

5. AIX

AIX OS problem? network problem?

Dear ALL. I installed AIX OS on customer sites. but Only one site is too slow when I connected telnet, ftp.. Ping is too fast. but telnet and FTP is not connected.. of course i check the configuration file on aix but it's normal. Do any Idea?? thanks in advance. - Jun - (3 Replies)
Discussion started by: Jeon Jun Seok
3 Replies

6. Solaris

Solaris 10 ftp connection problem (connection refused, connection timed out)

Hi everyone, I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Discussion started by: labdakos
4 Replies

7. AIX

Help Me - AIX server connect to a VPN network

Hi, I have a task requested by my boss to create a script to enable a server to connect to a vpn network and then to connect to another server to upload some data... How can I connect to a vpn network from AIX server? via telnet? ssh? I have tried to google but mostly the answers are... (1 Reply)
Discussion started by: mushr00m
1 Replies

8. UNIX for Advanced & Expert Users

fork: Resource temporarily unavailable , server unexpectedly unavailable network connection

Solaris 10 Server refuse to connect :wall: fork: Resource temporarily unavailable , server unexpectedly unavailable network connection , refuse error, disconnect message, fatal error type2, (protocol error type2) Issue has been resolved after taken few steps :b: First of all need to check... (1 Reply)
Discussion started by: taherahmed
1 Replies

9. Ubuntu

ssh connection unstable on remote server

Hi I hope someone can spot what is wrong with this ssh connection as it has me baffled. I am trying to set up a remote ssh connection (passwordless) to a remote 'server', (Ubuntu laptop at home). I have tried these steps with rsa and dsa key types, (currently dsa) - 1) ssh-keygen... (4 Replies)
Discussion started by: steadyonabix
4 Replies

10. AIX

FTP connection refused from text editor while accessing AIX server .

HI , I'm facing the FTP connection refused from text editor while accessing AIX server .It showing the messege "can't create ftp connection connectin refused".Though it is accessible from putty . i'm using aix version 6 . Can any one let me know the seetings needs to be made so that i... (2 Replies)
Discussion started by: rmkganesh
2 Replies
MXGE(4) 						   BSD Kernel Interfaces Manual 						   MXGE(4)

NAME
mxge -- Myricom Myri10GE 10 Gigabit Ethernet adapter driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device firmware device mxge Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5): if_mxge_load="YES" mxge_ethp_z8e_load="YES" mxge_eth_z8e_load="YES" mxge_rss_ethp_z8e_load="YES" mxge_rss_eth_z8e_load="YES" DESCRIPTION
The mxge driver provides support for PCI Express 10 Gigabit Ethernet adapters based on the Myricom LANai Z8E chip. The driver supports Transmit/Receive checksum offload, Jumbo Frames, TCP segmentation offload (TSO) as well as Large Receive Offload (LRO). For further hardware information, see http://www.myri.com/. For questions related to hardware requirements, refer to the documentation supplied with your Myri10GE adapter. All hardware requirements listed apply to use with FreeBSD. Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility configures the adapter to receive and transmit Jumbo Frames. The maximum MTU size for Jumbo Frames is 9000. For more information on configuring this device, see ifconfig(8). HARDWARE
The mxge driver supports 10 Gigabit Ethernet adapters based on the Myricom LANai Z8E chips: o Myricom 10GBase-CX4 (10G-PCIE-8A-C, 10G-PCIE-8AL-C) o Myricom 10GBase-R (10G-PCIE-8A-R, 10G-PCIE-8AL-R) o Myricom 10G XAUI over ribbon fiber (10G-PCIE-8A-Q, 10G-PCIE-8AL-Q) LOADER TUNABLES
Tunables can be set at the loader(8) prompt before booting the kernel or stored in loader.conf(5). hw.mxge.flow_control_enabled Whether or not hardware flow control is enabled on the adapter. The default value is 1. hw.mxge.intr_coal_delay This value delays the generation of all interrupts in units of 1 microsecond. The default value is 30. hw.mxge.skip_pio_read This value determines whether or not the driver may omit doing a PIO read in the interrupt handler which ensures that the interrupt line has been deasserted when using xPIC interrupts. A non-zero value may result in lower CPU overhead, however it may also result in spurious interrupts. The default value is 0. This tunable has no effect when the device is using MSI or MSI-X interrupts. hw.mxge.max_slices This value determines the maximum number of slices the driver will attempt to use. The default value is 1. A slice is comprised of a set of receive queues and an associated interrupt thread. When using multiple slices, the NIC hashes traffic to different slices based on the value of hw.mxge.rss_hashtype. Using multiple slices requires that your motherboard and Myri10GE NIC both be capable of MSI-X. Older Myri10GE NICs can be field upgraded to add MSI-X using the "10G NIC Tool Kit" for FreeBSD which is available from http://www.myri.com/scs/download-10g-tools.html. hw.mxge.rss_hashtype This value determines how incoming traffic is steered to different slices. This tunable is ignored when using just a single slice. The legal values for this tunable are: 1 Hash on the source and destination IPv4 addresses. 2 Hash on source and destination IPv4 addresses and if the packet is TCP, then also hash on the TCP source and destination ports. 4 Hash on the TCP or UDP source ports. This is the default value. DIAGNOSTICS
mxge%d: Unable to allocate bus resource: memory A fatal initialization error has occurred. mxge%d: Unable to allocate bus resource: interrupt A fatal initialization error has occurred. mxge%d: Could not find firmware image %s The appropriate firmware kld module was not installed. This is a non-fatal initialization error, but will result in running in a reduced performance mode. SUPPORT
For general information and support, go to the Myricom support website at: http://www.myri.com/scs/. If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information related to the issue to <help@myri.com>. SEE ALSO
altq(4), arp(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY
The mxge device driver first appeared in FreeBSD 6.3. AUTHORS
The mxge driver was written by Andrew Gallatin <gallatin@FreeBSD.org>. BSD
February 13, 2008 BSD

Featured Tech Videos

All times are GMT -4. The time now is 02:37 PM.
Unix & Linux Forums Content Copyright 1993-2021. All Rights Reserved.
Privacy Policy