ok - so you have some link aggregations with 100/1000 and some with 10G adapters. The 10G will almost always be faster. Considering how many 10G ports you have on your box, you may want to consider to move all of them to 10G instead? That would make tuning your network much easier.
If / when you do this, after long and exhausting RAC testing on our systems (similar hardware), we have found below network tunables to be the most beneficial for us. But be careful - do not change all of them at once - but one by one and see if your performance gets better, worse or remains the same.
You can change them via no -p -o name=value - note there is NO space before and after the equal sign in the command to change them.
in addition, you probably want to put this into your /etc/netsvc.conf hosts=local,bind4
Thank a lot for your help. Could you show me a little bit about your system, somethings like server's system model, OS version and Oracle version, so I can see how your system is similar to ours.
Cause our system is online now, it's dangerous to change something, so we need to be sure of what to do. Thanks again
Solaris Server (V880) version 8
Brand new box just installed O/S, what do I need to do in order to get FTP working.
I have updated the /etc/hosts.equiv file
Problem - When trying to ftp to the server I get a login incorrect message, this is with the root user.
Are there some... (1 Reply)
I have a network connection problem in unix. I am trying to access to LAN in unix but unfortunately it doesn't work. For example, if I ping from Unix to windows it says 'the network is unreacable'. Also, I can't ping in windows to unix.
I would be glad if someone could help me.
Thanks.
... (5 Replies)
Hi - I have a SUSE Enterprise Linux Server V9 that I have an issue with. Policy says that root connectivity via ssh needs to be disabled. So, to do that, I made the following change in the sshd_config section:
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
PermitRootLogin no... (3 Replies)
Hi ,
when i try to passwordless connection login in ssh through putty, i am getting the "Server unexpectedly closed network connection" error.i have already finished the public and private key settings for the particular user.
thanks
MaroV (1 Reply)
Dear ALL.
I installed AIX OS on customer sites.
but Only one site is too slow when I connected telnet, ftp..
Ping is too fast. but telnet and FTP is not connected..
of course i check the configuration file on aix but it's normal.
Do any Idea??
thanks in advance.
- Jun - (3 Replies)
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Hi,
I have a task requested by my boss to create a script to enable a server to connect to a vpn network and then to connect to another server to upload some data...
How can I connect to a vpn network from AIX server? via telnet? ssh?
I have tried to google but mostly the answers are... (1 Reply)
Solaris 10 Server refuse to connect :wall:
fork: Resource temporarily unavailable , server unexpectedly unavailable network connection , refuse error, disconnect message, fatal error type2, (protocol error type2)
Issue has been resolved after taken few steps :b:
First of all need to check... (1 Reply)
Hi
I hope someone can spot what is wrong with this ssh connection as it has me baffled.
I am trying to set up a remote ssh connection (passwordless) to a remote 'server', (Ubuntu laptop at home).
I have tried these steps with rsa and dsa key types, (currently dsa) -
1) ssh-keygen... (4 Replies)
HI ,
I'm facing the FTP connection refused from text editor while accessing AIX server .It showing the messege "can't create ftp connection connectin refused".Though it is accessible from putty .
i'm using aix version 6 .
Can any one let me know the seetings needs to be made so that i... (2 Replies)
Discussion started by: rmkganesh
2 Replies
LEARN ABOUT OPENSOLARIS
gnome-network-preferences
gnome-network-preferences(1) User Commands gnome-network-preferences(1)NAME
gnome-network-preferences - configure GNOME network proxy
SYNOPSIS
gnome-network-preferences [gnome-std-options]
DESCRIPTION
The GNOME network proxy preference tool enables you to configure how your system connects to networks. You can configure the desktop to
connect to a proxy server, and specify the details of the proxy server. A proxy server is a server that intercepts requests to another
server, and fulfills the request itself, if it can. You can enter the Domain Name Service (DNS) name or the Internet Protocol (IP) address
of the proxy server.
OPTIONS
The following options are supported:
gnome-std-options Standard options available for use with most GNOME applications. See gnome-std-options(5).
EXAMPLES
Example 1: Launching the gnome-network-preferences tool
example% gnome-network-preferences
EXIT STATUS
The following exit values are returned:
0 Application exited successfully
>0 Application exited with failure
FILES
The following files are used by this application:
/usr/bin/gnome-network-preferences
Executable for gnome-network-preferences
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWgnome-desktop-prefs |
+-----------------------------+-----------------------------+
|Interface stability |Volatile |
+-----------------------------+-----------------------------+
SEE ALSO
Preference Tools Manual
Latest version of the GNOME Desktop User Guide for your platform.
gnome-control-center(1)attributes(5), gnome-std-options(5)NOTES
Written by Glynn Foster, Sun Microsystems Inc., 2003, 2006, 2007.
SunOS 5.11 09 Nov 2007 gnome-network-preferences(1)