Thanks for wonderful explanation. Here is my current setup.
There are 6 x 1TB disks. I installed Solaris 11.4 on the first entire disk and then mirrored it in rpool with the second disk. That gives me 4 disks of 1 TB each.
When I login to OVM Manager, select "create repository", select this server, select "physical disks", it gives me 4 disks in below format to select from. Here I can choose any disk and create a repository
Hi all,
I would like to know how to make new partitions....
I currently have allocated 60G for various slices (I have totally used 4 out of 7 available slices...
I am running only solaris on my box.
My plan is to have entire disk dedicated to solaris and run other OS from within... (19 Replies)
I have to do this exercise:
Create a virtual disk
Partition this disk
Create File system
Mount File System
I'm using Minix (which runs by Qemu as guest machine) on Linux (Host)
Is there anybody who knows how to solve first three point? :confused:
Thanks (4 Replies)
Hi All,
does any body know how to create Virtual NIC in Solaris 10
if any one have good article or reference
kindly provide me
i try to Google
but i didn't find good one (7 Replies)
Hi,
I have installed oracle 10g release 2 on solaris 10 Zone. I want to configure ASM in local Zone using virtual disks in place of real disks.
I have configured ASM using virtual disks in place real disk in Solaris 10 Global zone. How i can do in local Zone
Kindly guid me with proper... (1 Reply)
Hi, my root pool is as follows. How can I create a metadb if I want to create SVM volumes?
zpool status
pool: rpool1
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rpool1 ONLINE 0 0 0
c4t1d0s0 ... (10 Replies)
I’m setting up a boot disk mirror on Solaris 10 x86. I’m used to doing it on SPARC, where you can copy the partition table using fmthard. My x86 boot disk has 2 primary partitions, a Solaris one and a diagnostic one. Is there a way to copy those 2 primary partitions to the second disk without... (6 Replies)
Hi,
Quick question.
I have a data zpool that consists of 1 disk.
pool: data
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
c0t50002AC0014B06BEd0 ONLINE... (2 Replies)
have been trying to create a 2 GB ramdisk (virtual) to run on my T-2000 simulator (Legion) which has sun4v architecture. I have a SPARC workstation which runs on sun4u architecture with Solaris 10.
I have created a ramdisk image using dd command, newfs, then used ufsrestore to restore the... (3 Replies)
issue,
I had a zpool which was full
pool_temp1 199G 197G 1.56G 99% ONLINE -
pool_temp2 199G 196G 3.09G 98% ONLINE -
as you can see, full
so I replaced with a larger disk.
zpool replace pool_temp1 c3t600144F0FF8BA036000058CC1DB80008d0s0... (2 Replies)
Discussion started by: rrodgers
2 Replies
LEARN ABOUT DEBIAN
mic-livecd-iso-to-disk
MIC-LIVECD-ISO-TO-DISK(1) General Commands Manual MIC-LIVECD-ISO-TO-DISK(1)NAME
mic-livecd-iso-to-disk - Convert a livecd image to a live USB image then write to a USB disk or partition
SYNOPSIS
mic-livecd-iso-to-disk [--reset-mbr] [--noverify] [--overlay-size-mb <size>] [--home-size-mb <size>] [--unencrypted-home] <isopath>
[usbstick device]
<isopath> is your livecd image path name, [usbstick device] is optional, if not provided, it will detect automatically and ask you to
select.
DESCRIPTION
mic-livecd-iso-to-disk can convert a livecd image to a live USB image and write it to a USB disk or partition, it is different from mic-
image-writer which is just a safer dd with progress bar.
mic-livecd-iso-to-disk can detect all the removable USB disks and let you select one of them, if you didn't insert any USB disk, it will
ask you to insert until a USB disk is available, it can decide if your USB disk need to be formated and if your USB disk has an appropriate
partition for this livecd image, all the operations are interactive and have warnings f they will damage your old data on your USB disk.
mic-image-manager has a GUI tool for it.
OPTIONS --reset-mbr Set MBR on your USB disk
--noverify Don't verify your livecd image
--overlay-size-mb Specify overlay size, the default size is 64 MB
--home-size-mb Specify home size, the default is 0
EXAMPLES
Write a Molib live image to your USB disk:
mic-livecd-iso-to-disk your-2.1-final.img
EXIT STATUS
mic-livecd-iso-to-disk returns a zero exist status if it succeeds, otherwise return non-zero and print error message.
AUTHOR
Yi Yang, Anas Nashif, Jianfeng Ding
SEE ALSO mic-image-creator(1), mic-convertor(1), mic-chroot(1), mic-image-writer(1), mic-image-manager(1)perl v5.12.3 2011-05-31 MIC-LIVECD-ISO-TO-DISK(1)