binary(n)						       Tcl Built-In Commands							 binary(n)

__________________________________________________________________________________________________________________________________________________

NAME

       binary - Insert and extract fields from binary strings

SYNOPSIS

       binary format formatString ?arg arg ...?
       binary scan string formatString ?varName varName ...?
_________________________________________________________________

DESCRIPTION

       This command provides facilities for manipulating binary data.  The first form, binary format, creates a binary string from normal Tcl val-
       ues.  For example, given the values 16 and 22, on a 32 bit architecture, it might produce an 8-byte binary string consisting of two  4-byte
       integers,  one  for  each  of  the numbers.  The second form of the command, binary scan, does the opposite: it extracts data from a binary
       string and returns it as ordinary Tcl string values.

BINARY FORMAT

       The binary format command generates a binary string whose layout is specified by the formatString and whose contents come  from	the  addi-
       tional arguments.  The resulting binary value is returned.

       The  formatString consists of a sequence of zero or more field specifiers separated by zero or more spaces.  Each field specifier is a sin-
       gle type character followed by an optional numeric count.  Most field specifiers consume one argument to obtain the value to be	formatted.
       The  type  character  specifies	how  the value is to be formatted.  The count typically indicates how many items of the specified type are
       taken from the value.  If present, the count is a non-negative decimal integer or *, which normally indicates that all of the items in  the
       value  are to be used.  If the number of arguments does not match the number of fields in the format string that consume arguments, then an
       error is generated.

       Here is a small example to clarify the relation between the field specifiers and the arguments:
	      binary format d3d {1.0 2.0 3.0 4.0} 0.1

       The first argument is a list of four numbers, but because of the count of 3 for the associated field specifier, only the first  three  will
       be used. The second argument is associated with the second field specifier. The resulting binary string contains the four numbers 1.0, 2.0,
       3.0 and 0.1.

       Each type-count pair moves an imaginary cursor through the binary data, storing bytes at the current position and advancing the	cursor	to
       just  after the last byte stored.  The cursor is initially at position 0 at the beginning of the data.  The type may be any one of the fol-
       lowing characters:

       a    Stores a character string of length count in the output string.  Every character is taken as modulo 256 (i.e. the low  byte  of  every
	    character  is  used,  and  the  high  byte	discarded)  so	when storing character strings not wholly expressible using the characters
	    u0000-u00ff, the encoding convertto command should be used first if this truncation is not desired (i.e. if the characters  are  not
	    part  of  the ISO 8859-1 character set.)  If arg has fewer than count bytes, then additional zero bytes are used to pad out the field.
	    If arg is longer than the specified length, the extra characters will be ignored.  If count is *, then all of the bytes in arg will be
	    formatted.	If count is omitted, then one character will be formatted.  For example,
		   binary format a7a*a alpha bravo charlie
	    will return a string equivalent to alpha0000bravoc.

       A    This form is the same as a except that spaces are used for padding instead of nulls.  For example,
		   binary format A6A*A alpha bravo charlie
	    will return alpha bravoc.

       b    Stores  a  string of count binary digits in low-to-high order within each byte in the output string.  Arg must contain a sequence of 1
	    and 0 characters.  The resulting bytes are emitted in first to last order with the bits being formatted in	low-to-high  order  within
	    each  byte.   If  arg has fewer than count digits, then zeros will be used for the remaining bits.	If arg has more than the specified
	    number of digits, the extra digits will be ignored.  If count is *, then all of the digits in arg will  be	formatted.   If  count	is
	    omitted, then one digit will be formatted.	If the number of bits formatted does not end at a byte boundary, the remaining bits of the
	    last byte will be zeros.  For example,
		   binary format b5b* 11100 111000011010
	    will return a string equivalent to x07x87x05.

       B    This form is the same as b except that the bits are stored in high-to-low order within each byte.  For example,
		   binary format B5B* 11100 111000011010
	    will return a string equivalent to xe0xe1xa0.

       h    Stores a string of count hexadecimal digits in low-to-high within each byte in the output string.  Arg  must  contain  a  sequence	of
	    characters	in  the  set ``0123456789abcdefABCDEF''.  The resulting bytes are emitted in first to last order with the hex digits being
	    formatted in low-to-high order within each byte.  If arg has fewer than count digits, then zeros will be used for the  remaining  dig-
	    its.  If arg has more than the specified number of digits, the extra digits will be ignored.  If count is *, then all of the digits in
	    arg will be formatted.  If count is omitted, then one digit will be formatted.  If the number of digits formatted does not	end  at  a
	    byte boundary, the remaining bits of the last byte will be zeros.  For example,
		   binary format h3h* AB def
	    will return a string equivalent to xbax00xedx0f.

       H    This form is the same as h except that the digits are stored in high-to-low order within each byte.  For example,
		   binary format H3H* ab DEF
	    will return a string equivalent to xabx00xdexf0.

       c    Stores  one  or  more 8-bit integer values in the output string.  If no count is specified, then arg must consist of an integer value;
	    otherwise arg must consist of a list containing at least count integer elements.  The low-order 8 bits of each integer are stored as a
	    one-byte  value at the cursor position.  If count is *, then all of the integers in the list are formatted.  If the number of elements
	    in the list is fewer than count, then an error is generated.  If the number of elements in the list is greater than  count,  then  the
	    extra elements are ignored.  For example,
		   binary format c3cc* {3 -3 128 1} 260 {2 5}
	    will return a string equivalent to x03xfdx80x04x02x05, whereas
		   binary format c {2 5}
	    will generate an error.

       s    This  form	is  the same as c except that it stores one or more 16-bit integers in little-endian byte order in the output string.  The
	    low-order 16-bits of each integer are stored as a two-byte value at the cursor position with the least significant byte stored  first.
	    For example,
		   binary format s3 {3 -3 258 1}
	    will return a string equivalent to x03x00xfdxffx02x01.

       S    This form is the same as s except that it stores one or more 16-bit integers in big-endian byte order in the output string.  For exam-
	    ple,
		   binary format S3 {3 -3 258 1}
	    will return a string equivalent to x00x03xffxfdx01x02.

       i    This form is the same as c except that it stores one or more 32-bit integers in little-endian byte order in the  output  string.   The
	    low-order 32-bits of each integer are stored as a four-byte value at the cursor position with the least significant byte stored first.
	    For example,
		   binary format i3 {3 -3 65536 1}
	    will return a string equivalent to x03x00x00x00xfdxffxffxffx00x00x01x00

       I    This form is the same as i except that it stores one or more one or more 32-bit integers  in  big-endian  byte  order  in  the  output
	    string.  For example,
		   binary format I3 {3 -3 65536 1}
	    will return a string equivalent to x00x00x00x03xffxffxffxfdx00x01x00x00

       w    This  form	is  the same as c except that it stores one or more 64-bit integers in little-endian byte order in the output string.  The |
	    low-order 64-bits of each integer are stored as an eight-byte value at the cursor position with  the  least  significant  byte  stored |
	    first.  For example,														   |
		   binary format w 7810179016327718216												   |
	    will return the string HelloTcl													   |

       W																	   |
	    This  form	is  the  same  as  w  except that it stores one or more one or more 64-bit integers in big-endian byte order in the output |
	    string.  For example,														   |
		   binary format Wc 4785469626960341345 110											   |
	    will return the string BigEndian

       f    This form is the same as c except that it stores one or more one or more single-precision floating in the machine's native representa-
	    tion in the output string.	This representation is not portable across architectures, so it should not be used to communicate floating
	    point numbers across the network.  The size of a floating point number may vary across architectures, so the number of bytes that  are
	    generated  may  vary.   If the value overflows the machine's native representation, then the value of FLT_MAX as defined by the system
	    will be used instead.  Because Tcl uses double-precision floating-point numbers internally, there may be some loss of precision in the
	    conversion to single-precision.  For example, on a Windows system running on an Intel Pentium processor,
		   binary format f2 {1.6 3.4}
	    will return a string equivalent to xcdxccxccx3fx9ax99x59x40.

       d    This form is the same as f except that it stores one or more one or more double-precision floating in the machine's native representa-
	    tion in the output string.	For example, on a Windows system running on an Intel Pentium processor,
		   binary format d1 {1.6}
	    will return a string equivalent to x9ax99x99x99x99x99xf9x3f.

       x    Stores count null bytes in the output string.  If count is not specified, stores one null byte.  If count is *,  generates	an  error.
	    This type does not consume an argument.  For example,
		   binary format a3xa3x2a3 abc def ghi
	    will return a string equivalent to abc00def0000ghi.

       X    Moves  the cursor back count bytes in the output string.  If count is * or is larger than the current cursor position, then the cursor
	    is positioned at location 0 so that the next byte stored will be the first byte in the result string.  If count is	omitted  then  the
	    cursor is moved back one byte.  This type does not consume an argument.  For example,
		   binary format a3X*a3X2a3 abc def ghi
	    will return dghi.

       @    Moves  the cursor to the absolute location in the output string specified by count.  Position 0 refers to the first byte in the output
	    string.  If count refers to a position beyond the last byte stored so far, then null bytes will be placed in the  uninitialized  loca-
	    tions and the cursor will be placed at the specified location.  If count is *, then the cursor is moved to the current end of the out-
	    put string.  If count is omitted, then an error will be generated.	This type does not consume an argument. For example,
		   binary format a5@2a1@*a3@10a1 abcde f ghi j
	    will return abfdeghi0000j.

BINARY SCAN

       The binary scan command parses fields from a binary string, returning the number of conversions performed.  String gives the  input  to	be
       parsed  and  formatString  indicates  how  to parse it.	Each varName gives the name of a variable; when a field is scanned from string the
       result is assigned to the corresponding variable.

       As with binary format, the formatString consists of a sequence of zero or more field specifiers separated by zero  or  more  spaces.   Each
       field specifier is a single type character followed by an optional numeric count.  Most field specifiers consume one argument to obtain the
       variable into which the scanned values should be placed.  The type character specifies how the binary data is to be interpreted.  The count
       typically  indicates how many items of the specified type are taken from the data.  If present, the count is a non-negative decimal integer
       or *, which normally indicates that all of the remaining items in the data are to be used.  If there are not enough bytes  left	after  the
       current	cursor	position to satisfy the current field specifier, then the corresponding variable is left untouched and binary scan returns
       immediately with the number of variables that were set.	If there are not enough arguments for all of the fields in the format string  that
       consume arguments, then an error is generated.

       A  similar example as with binary format should explain the relation between field specifiers and arguments in case of the binary scan sub-
       command:
	      binary scan $bytes s3s first second

       This command (provided the binary string in the variable bytes is long enough) assigns a list of three integers to the variable	first  and
       assigns	a  single value to the variable second.  If bytes contains fewer than 8 bytes (i.e. four 2-byte integers), no assignment to second
       will be made, and if bytes contains fewer than 6 bytes (i.e. three 2-byte integers), no assignment to first will be made.  Hence:
	      puts [binary scan abcdefg s3s first second]
	      puts $first
	      puts $second
       will print (assuming neither variable is set previously):
	      1
	      25185 25699 26213
	      can't read "second": no such variable

       It is important to note that the c, s, and S (and i and I on 64bit systems) will be scanned into long data size	values.   In  doing  this,
       values  that  have  their high bit set (0x80 for chars, 0x8000 for shorts, 0x80000000 for ints), will be sign extended.	Thus the following
       will occur:
	      set signShort [binary format s1 0x8000]
	      binary scan $signShort s1 val; # val == 0xFFFF8000
       If you want to produce an unsigned value, then you can mask the return value to the desired size.  For  example,  to  produce  an  unsigned
       short value:
	      set val [expr {$val & 0xFFFF}]; # val == 0x8000

       Each  type-count  pair moves an imaginary cursor through the binary data, reading bytes from the current position.  The cursor is initially
       at position 0 at the beginning of the data.  The type may be any one of the following characters:

       a    The data is a character string of length count.  If count is *, then all of the remaining bytes in string will  be	scanned  into  the
	    variable.	If count is omitted, then one character will be scanned.  All characters scanned will be interpreted as being in the range
	    u0000-u00ff so the encoding convertfrom command might be needed if the string is not an ISO 8859-1 string.  For example,
		   binary scan abcde00fghi a6a10 var1 var2
	    will return 1 with the string equivalent to abcde00 stored in var1 and var2 left unmodified.

       A    This form is the same as a, except trailing blanks and nulls are stripped from the scanned value before it is stored in the  variable.
	    For example,
		   binary scan "abc efghi  00" A* var1
	    will return 1 with abc efghi stored in var1.

       b    The  data is turned into a string of count binary digits in low-to-high order represented as a sequence of ``1'' and ``0'' characters.
	    The data bytes are scanned in first to last order with the bits being taken in low-to-high order within each byte.	Any extra bits	in
	    the  last  byte  are ignored.  If count is *, then all of the remaining bits in string will be scanned.  If count is omitted, then one
	    bit will be scanned.  For example,
		   binary scan x07x87x05 b5b* var1 var2
	    will return 2 with 11100 stored in var1 and 1110000110100000 stored in var2.

       B    This form is the same as b, except the bits are taken in high-to-low order within each byte.  For example,
		   binary scan x70x87x05 B5B* var1 var2
	    will return 2 with 01110 stored in var1 and 1000011100000101 stored in var2.

       h    The data is turned into a string of count hexadecimal digits in low-to-high order represented as a sequence of characters in  the  set
	    ``0123456789abcdef''.   The  data bytes are scanned in first to last order with the hex digits being taken in low-to-high order within
	    each byte.	Any extra bits in the last byte are ignored.  If count is *, then all of the  remaining  hex  digits  in  string  will	be
	    scanned.  If count is omitted, then one hex digit will be scanned.	For example,
		   binary scan x07x86x05 h3h* var1 var2
	    will return 2 with 706 stored in var1 and 50 stored in var2.

       H    This form is the same as h, except the digits are taken in high-to-low order within each byte.  For example,
		   binary scan x07x86x05 H3H* var1 var2
	    will return 2 with 078 stored in var1 and 05 stored in var2.

       c    The data is turned into count 8-bit signed integers and stored in the corresponding variable as a list. If count is *, then all of the
	    remaining bytes in string will be scanned.	If count is omitted, then one 8-bit integer will be scanned.  For example,
		   binary scan x07x86x05 c2c* var1 var2
	    will return 2 with 7 -122 stored in var1 and 5 stored in var2.  Note that the integers returned are signed, but they can be  converted
	    to unsigned 8-bit quantities using an expression like:
		   expr ( $num + 0x100 ) % 0x100

       s    The  data is interpreted as count 16-bit signed integers represented in little-endian byte order.  The integers are stored in the cor-
	    responding variable as a list.  If count is *, then all of the remaining bytes in string will be scanned.  If count is  omitted,  then
	    one 16-bit integer will be scanned.  For example,
		   binary scan x05x00x07x00xf0xff s2s* var1 var2
	    will  return  2 with 5 7 stored in var1 and -16 stored in var2.  Note that the integers returned are signed, but they can be converted
	    to unsigned 16-bit quantities using an expression like:
		   expr ( $num + 0x10000 ) % 0x10000

       S    This form is the same as s except that the data is interpreted as count 16-bit signed integers represented in big-endian  byte  order.
	    For example,
		   binary scan x00x05x00x07xffxf0 S2S* var1 var2
	    will return 2 with 5 7 stored in var1 and -16 stored in var2.

       i    The  data is interpreted as count 32-bit signed integers represented in little-endian byte order.  The integers are stored in the cor-
	    responding variable as a list.  If count is *, then all of the remaining bytes in string will be scanned.  If count is  omitted,  then
	    one 32-bit integer will be scanned.  For example,
		   binary scan x05x00x00x00x07x00x00x00xf0xffxffxff i2i* var1 var2
	    will return 2 with 5 7 stored in var1 and -16 stored in var2.  Note that the integers returned are signed and cannot be represented by
	    Tcl as unsigned values.

       I    This form is the same as I except that the data is interpreted as count 32-bit signed integers represented in big-endian  byte  order.
	    For example,
		   binary scan x00x00x00x05x00x00x00x07xffxffxffxf0 I2I* var1 var2
	    will return 2 with 5 7 stored in var1 and -16 stored in var2.

       w    The  data is interpreted as count 64-bit signed integers represented in little-endian byte order.  The integers are stored in the cor- |
	    responding variable as a list.  If count is *, then all of the remaining bytes in string will be scanned.  If count is  omitted,  then |
	    one 64-bit integer will be scanned.  For example,											   |
		   binary scan x05x00x00x00x07x00x00x00xf0xffxffxff wi* var1 var2							   |
	    will return 2 with 30064771077 stored in var1 and -16 stored in var2.  Note that the integers returned are signed and cannot be repre- |
	    sented by Tcl as unsigned values.													   |

       W																	   |
	    This form is the same as w except that the data is interpreted as count 64-bit signed integers represented in big-endian  byte  order. |
	    For example,															   |
		   binary scan x00x00x00x05x00x00x00x07xffxffxffxf0 WI* var1 var2							   |
	    will return 2 with 21474836487 stored in var1 and -16 stored in var2.

       f    The  data  is interpreted as count single-precision floating point numbers in the machine's native representation.	The floating point
	    numbers are stored in the corresponding variable as a list.  If count is *, then all of the remaining bytes in string will be scanned.
	    If	count  is  omitted, then one single-precision floating point number will be scanned.  The size of a floating point number may vary
	    across architectures, so the number of bytes that are scanned may vary.  If the data does not represent a valid floating point number,
	    the resulting value is undefined and compiler dependent.  For example, on a Windows system running on an Intel Pentium processor,
		   binary scan x3fxccxccxcd f var1
	    will return 1 with 1.6000000238418579 stored in var1.

       d    This  form	is  the  same  as  f except that the data is interpreted as count double-precision floating point numbers in the machine's
	    native representation. For example, on a Windows system running on an Intel Pentium processor,
		   binary scan x9ax99x99x99x99x99xf9x3f d var1
	    will return 1 with 1.6000000000000001 stored in var1.

       x    Moves the cursor forward count bytes in string.  If count is * or is larger than the number of bytes after the current  cursor  cursor
	    position,  then  the  cursor  is  positioned after the last byte in string.  If count is omitted, then the cursor is moved forward one
	    byte.  Note that this type does not consume an argument.  For example,
		   binary scan x01x02x03x04 x2H* var1
	    will return 1 with 0304 stored in var1.

       X    Moves the cursor back count bytes in string.  If count is * or is larger than the current cursor position, then the  cursor  is  posi-
	    tioned  at	location  0  so that the next byte scanned will be the first byte in string.  If count is omitted then the cursor is moved
	    back one byte.  Note that this type does not consume an argument.  For example,
		   binary scan x01x02x03x04 c2XH* var1 var2
	    will return 2 with 1 2 stored in var1 and 020304 stored in var2.

       @    Moves the cursor to the absolute location in the data string specified by count.  Note that position 0 refers to  the  first  byte	in
	    string.  If count refers to a position beyond the end of string, then the cursor is positioned after the last byte.  If count is omit-
	    ted, then an error will be generated.  For example,
		   binary scan x01x02x03x04 c2@1H* var1 var2
	    will return 2 with 1 2 stored in var1 and 020304 stored in var2.

PLATFORM ISSUES

       Sometimes it is desirable to format or scan integer values in the native byte order for the machine.  Refer to the byteOrder element of the
       tcl_platform array to decide which type character to use when formatting or scanning integers.

SEE ALSO

       format(n), scan(n), tclvars(n)

KEYWORDS

       binary, format, scan

Tcl									8.0								 binary(n)