Well, the problematic environement is some old AIX versiond (AIX 5.3) Any newer systems (from AIX6.1 and up) there is the
command, which can be asked to tell if a path is in open or closed state. Older systems do not have this. For MPIO, we used SDDPCM back then, but it did not support XIV storages, thus XIV LUNs needed theyr own driver.
The SDDPCM is able to report open/close states, as in the next example:
XIV tools do not provide this info.
only tells if paths are in Available state, or not (defined, missing, failed...) But that info is not enough to tell if the hdisk can be removed or not.
Well, there are hundreds of LUN-s and I would need an automated way to report unused disks.
Now, let's see the above 2 hdisks in your way:
The latter is reporting that the disk is managed by a 3rd party VG - in this case GPFS. But there is no output if the disk is idle or is actually opened by GPFS daemons.
Let's see the readvgda version:
It seems thad readvgda just tryed it's best to read what might be a VGDA block on the disks, but there is obviously no relevant info. I can not see relevant difference between the outputs from 'in use' and 'not in use' disks. Am I correct this way?
Hi i need help pls ...
Server type sun fire 3800 I need to install solaris 9 .
When i boot the system i recieve the following :
System Controller 'sunfire3800':
Type 0 for Platform Shell
Type 1 for domain A console
Type 2 for domain B console
Type 3 for... (5 Replies)
I have a real emergency. I have a Sun Fire V240 UltraSparc server and am connected via the Serial Mgmnt Port with a Laptop. I have been building an Oracle database on it for the past couple months, not getting very far along with it , when suddenly, the system had a fatal crash. I've lost the... (2 Replies)
I've a Sun V440 machine, and it's running solaris 10 .. for some reason i need to install a fresh copy of solaris 10. for that i've prepared solaris 10 dvd but surprisingly i found there is no any dvd rom on this machine, so i've took a dvd rom from a V240 machine and inserted on V440.
after... (3 Replies)
Hi guys,
I had a solaris box, with veritas controled disk.
1 disc is showing soft errors, how can I repair the soft errors?
Please help.
Cheers; (4 Replies)
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
Hi all,
I am not sure whether anyone of you using XIV to copy vg from one host to another. After I managed to copy all the respective vg over to destination vg, and map all vg to destination and when come to varyonvg, I got the following error
0516-510 varyonvg: Physical volume not found for... (2 Replies)
I installed a new hard drive completely blank.
sun blade 150
openboot 4.10.6
message:
Boot device: disk:a File and args:
Bad magic number in disk label
Can't open label package
Evaluating:
Can't open boot device (15 Replies)
Hello Forum,
I'm really in a fix now,
I'm getting this error message now, seems like the boot block is damaged?
When I do probe-all the system freezes...
Can any one guide me as what to do next?
System is Solaris 8 running Open Boot PROM 4
System also does not have a cd/dvd rom drive...
... (17 Replies)
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)