IPMP group failed on Solaris 9 Post: 303038593

Sponsored Content

Operating Systems Solaris IPMP group failed on Solaris 9 Post 303038593 by solaris_1977 on Friday 6th of September 2019 05:11:25 PM

09-06-2019

Registered User

I am sorry to have confused you. I clubbed two issues in one. I will re-word this issue.

IPMP is already configured on this server. Suddenly I got alert that IPMP group is failed over due to some error. When I logged into the server, I found that ce2 was in FAILED status, instead of the usual INACTIVE state.

/etc/hostname.ce2 file is there and the physical interface is also present. There was never any change in its setup. Physically I can see light blinking on network port behind the server. But since this interface is in FAILED states, IPMP is broken. Running snoop on ce2, is not giving me any result. To test this, I tried to detach bge0 and it is not working

Code:

# if_mpadm -d bge0
Offline failed as there is no other functional interface available in the multipathing group for failing over the network access.
#
# cat /etc/hostname.ce2
sbprda-app1-ce2 group sbsd_data netmask + broadcast + deprecated -failover standby up
#

---------------------UPDATE-----------------
Found that cable had problem. After replacing that, I was able to fix this issue

Last edited by solaris_1977; 09-06-2019 at 11:44 PM..

This User Gave Thanks to solaris_1977 For This Post:

solaris_1977

View Public Profile for solaris_1977

Find all posts by solaris_1977

9 More Discussions You Might Find Interesting

1. Solaris

Solaris IP Multipathing (IPMP) Help

Hello All, I work for a Health care company at a local trauma hospital. I maintain a Picture Archiving and Communication System (PAC's). Basically, any medical images (X-Ray, CT, MRI, Mammo, etc) are stored digitally on the servers for viewing and dictation from diagnostic stations. I took over...

2. Solaris

Does Veritas Cluster work with IPMP on Solaris 10?

Does Veritas Cluster work with IPMP on Solaris 10? If anyone has set it up do you have a doc or tips? I have heard several different statements ranging from , not working at all to Yes it works! Great How? * Test and Base IPs???? * configure the MultiNICB agent ? I can give details...

3. Solaris

IPMP group failure when gateway not detected

A problem happened with me, I was configuring IP for two network interfaces, and when I rebooted the system, everything is working but after like 3 or 5 minutes it will tell me that the whole IPMP group has failed ! I tried to troubleshoot, so I found that the gateway is not reachable..so I...

4. Solaris

how to configure IPMP in solaris 9

Hi friends , can anyone provide me the complete steps to configure IPMP in solaris 9 or 10 provided i have two NIC card ? regards jagan

5. Solaris

Solaris IPMP

Can any one please explain me the concept behind IPMP in solaris clustering.Basic explanation would be really appreciated... Thanks in Advance vks

6. Solaris

Solaris 10 branded zone with IPMP

All. I am trying to create a 10 branded zone on a Sol 11.1 T5. The Global is using IPMP...so aggregating is out of the question. Has anyone successfully created a branded zone with IPMP? If they have can you please show me the steps you took to get this to run. Thanks

7. Solaris

IPMP over aggregate in Solaris 11

hi all, i start with solaris 11 and i am disapointed by the change on ip managing. i want to set a ipmp over tow aggregate but i dont find any doc and i am lost with the new commande switch1 net0 aggregate1 | net1 aggregate1 |-----| |...

8. Solaris

New to Solaris IPMP (conversion from Linux)

Hi all, I been reading examples of how to setup IPMP and how it differs from Etherchannel. However, i am still unsure of how it really works and i hope gurus here can shed some light on the questions I have below while i will lab it up for my own test -> q1) for IPMP, there is no such thing...

9. Solaris

Solaris 10 IPMP - failback=no

Hi all, Just a few questions -> Is an "OFFLINE" interface going back to "ONLINE" consider as a failback by IPMP ? I have "FAILBACK=no" in my /etc/default/mpathd; however when i do the following (igb0 and igb7 are in the same ipmp link based group) q1) why does "if_mpadm -r igb7" cause...

LEARN ABOUT SUSE

tgt-setup-lun

tgt-setup-lun(8)					      System Manager's Manual						  tgt-setup-lun(8)

NAME

       tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target

SYNOPSIS

       tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]

DESCRIPTION

       Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
       iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.

       The  script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
       tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.

EXAMPLES

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82

       Create a target that uses /dev/sdb1 and allows connections from any initiator:
       tgt-setup-lun -d /dev/sdb1 -n my_target

       Display help:
       tgt-setup-lun -h

AUTHOR

       Written by Erez Zilber

REPORTING BUGS

       Report bugs to <erezz@voltaire.com>.

COPYRIGHT

       Copyright (C) Voltaire Ltd. 2008.

																  tgt-setup-lun(8)