I have Solaris-9 server, V240.
I got alert that one of the interface on IPMP configuration, is failed. Found that two IPs (192.168.120.32 and 192.168.120.35) are not pingable from this server. These two IPs were plumbed on another server and that is decommissioned now. That is the reason, they are not pingable. For immediate fix, I plumbed both these IPs on another server and after that I was able to ping. I have seen this behaviour in other server, so I knew this may be the cause. But even after all IPs are pingable from routing table, I can't remove FAILED flag from ce0 interface.
I ran "pkill -HUP in.mpathd" on one terminal twice and checked /var/adm/messages on another session
Please suggest, what I am missing here and should check ?
Thanks
Last edited by solaris_1977; 09-06-2019 at 02:51 AM..
Hello All,
I work for a Health care company at a local trauma hospital. I maintain a Picture Archiving and Communication System (PAC's). Basically, any medical images (X-Ray, CT, MRI, Mammo, etc) are stored digitally on the servers for viewing and dictation from diagnostic stations. I took over... (10 Replies)
Does Veritas Cluster work with IPMP on Solaris 10?
If anyone has set it up do you have a doc or tips?
I have heard several different statements ranging from , not working at all to Yes it works! Great How?
* Test and Base IPs????
* configure the MultiNICB agent ?
I can give details... (1 Reply)
A problem happened with me, I was configuring IP for two network interfaces, and when I rebooted the system, everything is working but after like 3 or 5 minutes it will tell me that the whole IPMP group has failed !
I tried to troubleshoot, so I found that the gateway is not reachable..so I... (4 Replies)
Can any one please explain me the concept behind IPMP in solaris clustering.Basic explanation would be really appreciated...
Thanks in Advance
vks (2 Replies)
All.
I am trying to create a 10 branded zone on a Sol 11.1 T5. The Global is using IPMP...so aggregating is out of the question. Has anyone successfully created a branded zone with IPMP? If they have can you please show me the steps you took to get this to run.
Thanks (4 Replies)
hi all,
i start with solaris 11 and i am disapointed by the change on ip managing.
i want to set a ipmp over tow aggregate but i dont find any doc and i am lost with the new commande
switch1
net0 aggregate1 |
net1 aggregate1 |-----|
|... (1 Reply)
Hi all,
I been reading examples of how to setup IPMP and how it differs from Etherchannel. However, i am still unsure of how it really works and i hope gurus here can shed some light on the questions I have below while i will lab it up for my own test ->
q1) for IPMP, there is no such thing... (23 Replies)
Hi all,
Just a few questions ->
Is an "OFFLINE" interface going back to "ONLINE" consider as a failback by IPMP ?
I have "FAILBACK=no" in my /etc/default/mpathd; however when i do the following
(igb0 and igb7 are in the same ipmp link based group)
q1) why does "if_mpadm -r igb7" cause... (0 Replies)