This is the command I am using. I am trying to find numbers greater than 70 in column 5. I do not know if it is getting confused because there is a % at the end or if it because there is a single digit in column 5,
This is my data that I get after I run the command. It is mostly correct except for the random 8% and 9%.
Could someone tell me how to perform calculations using numbers greater than 2150000000 in Korn Shell? When I tried to do it it gave me the wrong answer.
e.g. I have a ksh file with the contents below:
---------------------------------
#!/bin/ksh
SUM=`expr 2150000000 + 2`
PRODUCT=`expr... (3 Replies)
I have some ASCII files containing numerous numbers. What I'd like to do is replace all numbers greater than 0 with 1.
Examples of the numbers include: - 000011 and 000042
Thanks (4 Replies)
i have a file contains:
13213,A,300
3423,C,200
5563,A,201
3000,A,400
3000,A,402
3000,A,206
3000,A,303
3000,A,200
4233,N,204
i need to search for numbers in the first column are greater than 3000?
i have another issue if you can help me?
if i want to search in the second or the... (7 Replies)
Hi, as the title states i need to find a way to search a column for values great than 1000, and if it is, then delete that row.
An example
1 7.021 6.967 116.019 4 U 6.980E+07 0.000E+00 e 0 0 0 0
2 8.292 7.908 118.063 3 U 1.440E+07 0.000E+00 e 0 821 814 ... (3 Replies)
Hi, I need to write a script that will read each line of a CSV file, look for values greater than x seconds and email an alert.
For the first part, I have one CSV per day, each line in the CSV has comma separated values. There are a total of 8 fields per line separated by commas. 6th and 7th... (3 Replies)
I have a file with multiple fields, example below
File 1:
Field 1|Field 2|Field 3|Field 4|Field 5|Field 6|Field 7|100
Field 1|Field 2|Field 3|Field 4|Field 5|Field 6|Field 7|101
Field 1|Field 2|Field 3|Field 4|Field 5|Field 6|Field 7|102
Field 1|Field 2|Field 3|Field 4|Field 5|Field... (4 Replies)
I'm trying to grep lines where the digits at the end of each line are greater than digits. Tried this but it will only allow me to specify 2 digits. Any ideas would greatly be appreciated. grep -i '\<\{3,4,5\}\>' file
---------- Post updated at 05:58 PM ---------- Previous update was at 05:41... (1 Reply)
Hi again. Sorry for all the questions — I've tried to do all this myself but I'm just not good enough yet, and the help I've received so far from bartus11 has been absolutely invaluable. Hopefully this will be the last bit of file manipulation I need to do.
I have a file which is formatted as... (4 Replies)
This matrix represents correlation values.
Is it possible to calculate the percentage of columns (a1, a2, a3) that have a value >= |0.5| and report the percentage that has positive correlation >0.5 and negative correlation <-0.5 separately. thanx in advance!
input
name a1 a2 a3... (5 Replies)
Discussion started by: quincyjones
5 Replies
LEARN ABOUT MOJAVE
mkdevmaps
mkdevmaps(1M) System Administration Commands mkdevmaps(1M)NAME
mkdevmaps - make device_maps entries
SYNOPSIS
/usr/sbin/mkdevmaps
DESCRIPTION
The mkdevmaps command writes to standard out a set of device_maps(4) entries describing the system's frame buffer, audio, and removable
media devices.
The mkdevmaps command is used by the init.d(4) scripts to create or update the /etc/security/device_maps file.
Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevmaps command
checks for the following files under /dev:
audio /dev/audio, /dev/audioctl, /dev/sound/...
tape /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer /dev/fb
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO allocate(1), bsmconv(1M), attributes(5)NOTES
mkdevmaps might not be supported in a future release of the Solaris operating system.
SunOS 5.10 8 Oct 2003 mkdevmaps(1M)