Visit The New, Modern Unix Linux Community

Operating Systems Solaris Fibre Channel link not ready on Netra 240 Post 303034409 by solaris_1977 on Wednesday 24th of April 2019 09:46:52 PM
Fibre Channel link not ready on Netra 240

Hi,
One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too.
There are two disks of 72GB, both are mirrored in SVM. It complains about Fibre channel failure, but what seems to be failed here on both disks ? This doesn't look like disk issue. Being old server, this server is not in Oracle support. I can buy replacement part, if I know, what may be failed part here.
Code:
{1} ok probe-scsi-all
/pci@1c,600000/scsi@2,1

/pci@1c,600000/scsi@2
Target 0
  Unit 0   Disk     SEAGATE ST373453LSUN72G 0449
Target 1
  Unit 0   Disk     SEAGATE ST373453LSUN72G 0449

/pci@1e,600000/SUNW,qlc@3
Fibre Channel link not ready - Loss of Sync
Fibre Channel link down

/pci@1e,600000/SUNW,qlc@2
Fibre Channel link not ready - Loss of Sync
Fibre Channel link down

{1} ok

I did diag-level max and power-cycle server, but its output is not giving me much clue. Here is output of obdiag
Code:
obdiag> test-all
Hit the spacebar to interrupt testing
Testing /pci@1e,600000/SUNW,qlc@2 Fibre Channel link not ready - Loss of Sync
Starting memory test - press any key to terminate test
HBA memory size - 131072 bytes
        Testing memory, pattern 1 /
        Testing memory, pattern 2 \
        Testing memory, pattern 3 /
        Testing memory, pattern 4 \
        Testing memory, pattern 5 /
        Testing memory, pattern 6 \
        Testing memory, pattern 7 /
        Testing memory, pattern 8 \
        Online Self-test Passed
        1-bit Internal Loopback  Test Passed
        10-bit Internal Loopback Test Passed
        External Loopback        Test Passed
Error: /pci@1e,600000/SUNW,qlc@2 selftest resulted in net stack depth change of -1
Selftest at /pci@1e,600000/SUNW,qlc@2 ................................. failed
Testing /pci@1e,600000/SUNW,qlc@3 Fibre Channel link not ready - Loss of Sync
Starting memory test - press any key to terminate test
HBA memory size - 131072 bytes
        Testing memory, pattern 1 /
        Testing memory, pattern 2 \
        Testing memory, pattern 3 /
        Testing memory, pattern 4 \
        Testing memory, pattern 5 /
        Testing memory, pattern 6 \
        Testing memory, pattern 7 /
        Testing memory, pattern 8 \
        Online Self-test Passed
        1-bit Internal Loopback  Test Passed
        10-bit Internal Loopback Test Passed
        External Loopback        Test Passed
Error: /pci@1e,600000/SUNW,qlc@3 selftest resulted in net stack depth change of -1
Selftest at /pci@1e,600000/SUNW,qlc@3 ................................. failed
Testing /pci@1e,600000/isa@7/flashprom@2,0 ............................ passed
Testing /pci@1e,600000/isa@7/i2c@0,320 ................................ passed
Testing /pci@1e,600000/ide@d .......................................... passed
Testing /pci@1d,700000/pci@1/pci@0/network@0 Register tests: passed
Internal loopback test: passed
/pci@1d,700000/pci@1/pci@0/network@0: Timed out waiting for Auto-Negotation to complete
/pci@1d,700000/pci@1/pci@0/network@0: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@1d,700000/pci@1/pci@0/network@0: link down
.......................... passed
Testing /pci@1d,700000/pci@1/pci@0/network@1 Register tests: passed
Internal loopback test: passed
/pci@1d,700000/pci@1/pci@0/network@1: Timed out waiting for Auto-Negotation to complete
/pci@1d,700000/pci@1/pci@0/network@1: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@1d,700000/pci@1/pci@0/network@1: link down
.......................... passed
Testing /pci@1f,700000/network@2 ...................................... passed
Testing /pci@1d,700000/network@2 ...................................... passed
Testing /pci@1d,700000/pci@1/pci@4/network@2 Register tests: passed
Internal loopback test: passed
/pci@1d,700000/pci@1/pci@4/network@2: Timed out waiting for Auto-Negotation to complete
/pci@1d,700000/pci@1/pci@4/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@1d,700000/pci@1/pci@4/network@2: link down
.......................... passed
Testing /pci@1f,700000/network@2,1 .................................... passed
Testing /pci@1d,700000/network@2,1 .................................... passed
Testing /pci@1d,700000/pci@1/pci@4/network@3 Register tests: passed
Internal loopback test: passed
/pci@1d,700000/pci@1/pci@4/network@3: Timed out waiting for Auto-Negotation to complete
/pci@1d,700000/pci@1/pci@4/network@3: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@1d,700000/pci@1/pci@4/network@3: link down
.......................... passed
Testing /pci@1e,600000/isa@7/rmc-comm@0,3e8 ........................... passed
Testing /pci@1e,600000/isa@7/rtc@0,70 ................................. passed
Testing /pci@1c,600000/scsi@2 ......................................... passed
Testing /pci@1c,600000/scsi@2,1 ....................................... passed
Testing /pci@1e,600000/isa@7/serial@0,2e8 ............................. passed
Testing /pci@1e,600000/isa@7/serial@0,3f8 ............................. passed
Pass:1 (of 1) Errors:2 (of 2) Tests Failed:2 Elapsed Time: 0:0:4:45


Hit any key to return to the main menu
 _____________________________________________________________________________
|                                 o b d i a g                                 |
|_________________________ _________________________ _________________________|
|                         |                         |                         |
|  1 SUNW,qlc@2           |  2 SUNW,qlc@3           |  3 flashprom@2,0        |
|  4 i2c@0,320            |  5 ide@d                |  6 network@0            |
|  7 network@1            |  8 network@2            |  9 network@2            |
| 10 network@2            | 11 network@2,1          | 12 network@2,1          |
| 13 network@3            | 14 rmc-comm@0,3e8       | 15 rtc@0,70             |
| 16 scsi@2               | 17 scsi@2,1             | 18 serial@0,2e8         |
| 19 serial@0,3f8         |                         |                         |
|_________________________|_________________________|_________________________|
|       Commands: test test-all except help what setenv set-default exit      |
|_____________________________________________________________________________|
|                   diag-passes=1 diag-level=max test-args=                   |
|_____________________________________________________________________________|

obdiag>

Thanks in advance
 
Test Your Knowledge in Computers #859
Difficulty: Medium
AJAX is designed for two-way client-server communications.
True or False?

10 More Discussions You Might Find Interesting

1. Solaris

Netra 240 Hard disk are not detected

Hi All, I have new Netra 240 box which is not detecting its harddisk equiped with itse same har disk are detected when I swap with another machine. Same time If I swap hardisk of other machine to this Netra 240 box, also do not work. I have checked chassis, cabling etc and all looks fine. ... (1 Reply)
Discussion started by: xpwistler
1 Replies

2. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad: (4 Replies)
Discussion started by: Zim-Aix-Guru
4 Replies

3. AIX

Power6 Virtual Fibre Channel Adapter

Hello, Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter. It is similar to virtual scsi adapter. In my client partition I created the virtual Fibre Adapter mapped it with the VIO... (1 Reply)
Discussion started by: filosophizer
1 Replies

4. Solaris

netra 240 difference

Hi, sunfire v240 and netra 240 are looks similar. system board, memory and processors are similar, then why netra 240 called as telco server? can anyone tell the difference. RJS (1 Reply)
Discussion started by: rajasekg
1 Replies

5. Solaris

USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?

Hi , I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error... (0 Replies)
Discussion started by: naveen448
0 Replies

6. Solaris

SUN Netra 240 Boot error

Hi, When I am trying to boot my SUN Netra 240 Machine its giving some boot error. > {1} ok boot -i > Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args: -i > Boot load failed. > The file just loaded does not appear to be executable. > {1} ok I tried to boot it from cdrom... (9 Replies)
Discussion started by: ppandey21
9 Replies

7. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance. (1 Reply)
Discussion started by: atahmass
1 Replies

8. Hardware

POST displays error sparc netra 240

Hi guys, when I power on my sun netra 240 server, it displays these error messages: 1. Notice: cpu 0 has 2048/2048 MB of memory disabled. 2. Error : The following devices are disabled dimm1. Please can anyone be kind enough to explain this for me? Thanks (2 Replies)
Discussion started by: cjashu
2 Replies

9. Solaris

Fibre channel link down on booting Solaris server

Hi I had power issue that affected a server, in which I had power ON the server SPARC T1-B3 running solaris 10. After power on the system stops at ok prompt, them I issued the following commands: {0} ok setenv auto-boot? false auto-boot? = false {0} ok reset-all SPARC T3-1B,... (10 Replies)
Discussion started by: fretagi
10 Replies

10. AIX

[ASK] - AIX Fibre Channel behavior

Hello all, Let me introduce about the context and my environment. We have an AIX 6.1 system, it has 4 FC channels / > lsdev -Cc adapter | grep fcs fcs0 Available 23-T1 Virtual Fibre Channel Client Adapter fcs1 Available 23-T1 Virtual Fibre Channel Client Adapter fcs2 Available 23-T1... (14 Replies)
Discussion started by: Phat
14 Replies

Featured Tech Videos

All times are GMT -4. The time now is 02:42 AM.
Unix & Linux Forums Content Copyright 1993-2020. All Rights Reserved.
Privacy Policy