Today (Saturday) We will make some minor tuning adjustments to MySQL.

You may experience 2 up to 10 seconds "glitch time" when we restart MySQL. We expect to make these adjustments around 1AM Eastern Daylight Saving Time (EDT) US.

"Need Hardware help on a RP4440 that lost the RTC and does not see both hard drives"

Post #303029739 by mrmurdock on Thursday 31st of January 2019 01:12:59 PM

Need Hardware help on a RP4440 that lost the RTC and does not see both hard drives

Since the lost of the rtc all the settings became default. Does anyone remember what needs to be reset to discover both Hard drives? It sees the DVD and the scsi disk (intscsib.0) in 0/1/1/1.0 (disk 1 slot) but not 0/1/1/0.1 (intscsia.1)(disk 0 slot).
Right now, from the service menu, scsi shows both paths at scsi Initiator ID 7 and Auto TERM is unknown, Cannot set the AUTO TERM. I have set the scsi ID to be different on the controller paths, but still cannot identify second disk. The RP4440 Service guide and Maintanence Guide and User Guides are not much help.
Related Linux and UNIX Technical Support
Hard drives
Will some one tell me what this means. "warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20." I'm running SCO 505 on a proliant 1600r. Thnank you in advance.... UNIX for Dummies Questions & Answers
UNIX for Dummies Questions & Answers
No Hard Drives Have Been Found
I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives...... Linux
Is my data lost? Installed Linux, no longer can I access my hard drives.
Here's the story - I installed Linux on my Y drive, and all went well until I tried to boot into XP again. I can't access or install an operating system to my other three hard drives, C, X, and Z. I think that during the install my hard drives were changed to something other then NTFS, but...... Linux
Help adding new hard drives
Folks; I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version. Is there a command i can use to add the new space or even see if the system can sees them?... Filesystems, Disks and Memory
Filesystems, Disks and Memory
Reinstall old hard drives
I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot...... Solaris
volcheck(1)							   User Commands						       volcheck(1)

volcheck - checks for media in a drive and by default checks all floppy media
volcheck [-v] [-i secs] [-t secs] pathname
The volcheck utility tells volume management to look at each dev/pathname in sequence and determine if new media has been inserted in the drive. The default action is to volcheck all checkable media managed by volume management.
The following options are supported: -i secs Set the frequency of device checking to secs seconds. The default is 2 seconds. The minimum frequency is 1 second. -t secs Check the named device(s) for the next secs seconds. The maximum number of seconds allowed is 28800, which is 8 hours. The fre- quency of checking is specified by -i. There is no default total time. -v Verbose.
The following operands are supported: pathname The path name of a media device.
Example 1 A sample of the volcheck command. The following example example% volcheck -v /dev/diskette /dev/diskette has media asks volume management to examine the floppy drive for new media. The following example example% volcheck -i 2 -t 600 /dev/diskette1 & asks volume management if there is a floppy in the floppy drive every 2 seconds for 600 seconds (10 minutes).
/dev/volctl volume management control port
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWvolu | +-----------------------------+-----------------------------+
eject(1), rmmount(1M), attributes(5)
Due to a hardware limitation in many floppy drives, the act of checking for media causes mechanical action in the floppy drive. Continu- ous polling of the floppy drive will cause the drive to wear out. It is recommended that polling the drive only be performed during periods of high use. SunOS 5.11 28 Feb 2007 volcheck(1)

Featured Tech Videos