Check the output of following commands :
This will tell us if those devices are present in VDS and in LDOM and what is the current configuration saved to SP.
I suspect ldom in question has been modified (added disks) without a save on SP.
If you have former saved configuration in xml somewhere (you really should save it to files at time intervals), run
And diff vs past working one.
Hi,
I have issues installing Solaris into a LDom using a Solaris10u5/08 DVD. I have been troubleshooting for the past 2 days and I still cannot get it up.
Here is the logs:
root@eld-app2# ldm add-vdsdev /cdrom/sol_10_508_sparc/s0 cdrom0@primary-vds0
root@eld-app2# ldm add-vdisk cdrom0... (4 Replies)
Hi, Here is the issue: There are 4 disks on this Sun x4150 system under Solaris 10, but only 1 disk can be seen by the OS. I've tried commands disks and devfsadm but not working. It's an important production server, so 'reboot -r' is not a choice.
# format < /dev/null
Searching for... (6 Replies)
Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes.
Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come... (2 Replies)
Apologies if this is the wrong forum..
I have some LDOMs running on a Sparc server. I copied the disk0 file from one chassis over to another, stopped the ldom on the source system and started it on the 2nd one. All fine. Shut it down and flipped back. We then did a fair bit of work on the... (4 Replies)
Help Please!
I picked up a V440 and it has 4 disks. I installed Solaris fine to disk 3, but I cannot see the other disks in Solaris.
I have run probe-scsi-all from OBP and I see the other disks and they have names in devalias AFAIK. It's just in Solaris they do not appear. I have run... (6 Replies)
I have an Oracle VM set up with 1 virtual disk. I am trying to add 2 new disks to it. I was able to successfully add 1 (it appears when I run "format" in the VM) but when I add the second and third disks they do not appear in my VM.
Here are the commands I ran:
ldm add-vdsdev... (3 Replies)
Hi,
Our existing environment is having primary domain and 3 guest domains are running over it. See the attached image.
Now we want to add a new primary virtual switch and move LDOM3 to be connected with new primary switch.
So, I am not sure how to achieve this because. If I remove the... (7 Replies)
Hi Folks,
I've just built a Solaris 11.3 server with a number of LDOM's, all good and well and not any serious issues so far.
On our older Solaris 10 systems we ran Oracle 11g using ASM disks, these disks were the raw device meta disks and came in very nicely as "/dev/md/rdsk/dnn" all worked... (4 Replies)
I have a Sun T4-1 running Solaris 11.4 with a static IP 192.168.0.183. On this machine is a Solaris 10 LDOM with a static IP of 192.168.0.78. The other day I had to stop the LDOM to do a memory reconfigure. When I rebooted it I got an error that the IP 192.168.0.78 was already in use and so... (4 Replies)