make: Entering directory `/root/rpmbuild/BUILD/igb-5.3.5.18/src'
common.mk:102: *** Kernel header files not in any of the expected locations.
common.mk:103: *** Install the appropriate kernel development package, e.g.
common.mk:104: *** kernel-devel, for building kernel modules and try again. Stop.
make: Leaving directory `/root/rpmbuild/BUILD/igb-5.3.5.18/src'
error: Bad exit status from /var/tmp/rpm-tmp.TZXs4M (%build)
I have installed in the server a quad ethernet adapter, I'm using two interfaces with two different IP networks, both interfaces are connected to a switch, the switch report that is receiving the same MAC address in both ports so must of the times I have connectivity problems.
Any idea to change... (1 Reply)
I have a Dual Boot system - XP with Solaris 10. I built the system from the ground up with different components and the Ethernet Card built into the Motherboard is a Marvell Yukon Gigabit Ethernet 10/100/1000 T-base, RJ-45 Copper.
I am unable to go to the Web as the Ethernet Card is still not... (2 Replies)
Hi,
In our AIX 5.2 server , we have one unused ethernet adapter which doesn't have cable connection . For this interface , we are getting alerts in errpt .
Could you suggesthow to stop this alert ? And sametime i would like to keep this device in ODM .
Is there... (1 Reply)
All
I am trying allocate an IVE to an LPAR (not a VIO) running AIX 7.1. I am getting the error:
HSCL068A
Explanation
Logical port can not be assigned to Logical Partition because this Logical Partition is not the promiscuous LPAR for the physical port.
Has anyone encountered this... (1 Reply)
Hi,
I have installed Oracle Enterprise Linux 5 in my PC. After the installation the Ethernet Card is not got detected.
But I could able to get the details using the command lspci -a:
01:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0).
But I could... (4 Replies)
Hi,
Does anybody have a "Sun 10-Gigabit Ethernet Adapter installation CD" or driver ixge for Sun 10-Gigabit Ethernet PCI-X adapter? I need it but can't find it anywhere. So if you know where I can download it or purchase it, please let me know. (Already tried Oracle's website, don't have it) ... (5 Replies)
Hi Techies,
I have a doubt.
ent0 Available Logical Host Ethernet Port (lp-hea)
ent1 Available Logical Host Ethernet Port (lp-hea)
ent2 Available Logical Host Ethernet Port (lp-hea)
ent3 Available Logical Host Ethernet Port (lp-hea)
ent4 Available... (4 Replies)
Hi Community,
i have one issue with 10 fiber ethernet adapter.
here is my details:
root@new-bpel.example.com #dladm show-dev
bge0 link: unknown speed: 0 Mbps duplex: unknown
bge1 link: up speed: 1000 Mbps duplex: full
qlge2 link:... (4 Replies)
hi .I've installed an operating system SCO in HP Z400 and network cards ZyXEL model FN312 with Chipset RTL8139D put it on .network card installed but do not display network card with command ifconfig -a in list and just show loopback.
show message :
dlpid:unable to open network adapter driver... (14 Replies)
Discussion started by: moein.mojtaba
14 Replies
LEARN ABOUT DEBIAN
miibus
MIIBUS(4) BSD Kernel Interfaces Manual MIIBUS(4)NAME
miibus -- IEEE 802.3 Media Independent Interface network bus
SYNOPSIS
For most network interface cards (NIC):
device miibus
DESCRIPTION
The miibus driver provides an interconnection between the Media Access Control (MAC) sublayer, the Physical Layer entities (PHY), Station
Management (STA) entities, and the PHY Layer as defined by the IEEE 802.3 Standard.
The miibus layer allows network device drivers to share common support code for various external PHY devices. Most 10/100 network interface
cards either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. The miibus driver currently
handles all of the media detection, selection, and reporting using the ifmedia interface. A generic driver has been included for all PHYs
that are not handled by a specific driver, this is possible because all 10/100 PHYs implement the same general register set along with their
vendor specific register set.
The following network device drivers use the miibus interface:
age(4) Attansic/Atheros L1 Gigabit Ethernet
alc(4) Atheros AR8131/AR8132 PCIe Ethernet
ale(4) Atheros AR8121/AR8113/AR8114 PCIe Ethernet
aue(4) ADMtek USB Ethernet
axe(4) ASIX Electronics AX88172 USB Ethernet
bce(4) Broadcom NetXtreme II Gigabit Ethernet
bfe(4) Broadcom BCM4401 Ethernet
bge(4) Broadcom BCM570xx Gigabit Ethernet
cas(4) Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn
dc(4) DEC/Intel 21143 and various workalikes
ed(4) NE[12]000, SMC Ultra, 3c503, DS8390 cards
et(4) Agere ET1310 Gigabit Ethernet
fxp(4) Intel EtherExpress PRO/100B
gem(4) Sun ERI, Sun GEM and Apple GMAC Ethernet
hme(4) Sun HME Ethernet
jme(4) JMicron JMC250 Gigabit/JMC260 Fast Ethernet
lge(4) Level 1 LXT1001 NetCellerator Gigabit Ethernet
msk(4) Marvell/SysKonnect Yukon II Gigabit Ethernet
nfe(4) NVIDIA nForce MCP Networking Adapter
nge(4) National Semiconductor DP83820/DP83821 Gigabit Ethernet
nve(4) NVIDIA nForce MCP Networking Adapter
pcn(4) AMD Am79C97x PCI 10/100
re(4) RealTek 8139C+/8169/8169S/8110S
rl(4) RealTek 8129/8139
rue(4) RealTek RTL8150 USB To Fast Ethernet
sf(4) Adaptec AIC-6915
sge(4) Silicon Integrated Systems SiS190/191 Ethernet
sis(4) Silicon Integrated Systems SiS 900/SiS 7016
sk(4) SysKonnect SK-984x and SK-982x Gigabit Ethernet
ste(4) Sundance ST201 (D-Link DFE-550TX)
stge(4)
Sundance/Tamarack TC9021 Gigabit Ethernet
tl(4) Texas Instruments ThunderLAN
tx(4) SMC EtherPower II (83c170)
udav(4)
Davicom DM9601 USB Ethernet
vge(4) VIA VT612x PCI Gigabit Ethernet
vr(4) VIA Rhine, Rhine II
wb(4) Winbond W89C840F
xl(4) 3Com 3c90x
COMPATIBILITY
The implementation of miibus was originally intended to have similar API interfaces to BSD/OS 3.0 and NetBSD, but as a result are not well
behaved newbus device drivers.
SEE ALSO age(4), alc(4), ale(4), arp(4), aue(4), axe(4), bce(4), bfe(4), bge(4), cas(4), dc(4), ed(4), et(4), fxp(4), gem(4), hme(4), jme(4), lge(4),
msk(4), netintro(4), nfe(4), nge(4), nve(4), pcn(4), re(4), rgephy(4), rl(4), rue(4), sf(4), sge(4), sis(4), sk(4), ste(4), stge(4), tl(4),
tx(4), udav(4), vge(4), vr(4), wb(4), xl(4)STANDARDS
More information on MII can be found in the IEEE 802.3 Standard.
HISTORY
The miibus driver first appeared in FreeBSD 3.3.
AUTHORS
This manual page was written by Tom Rhodes <trhodes@FreeBSD.org>.
BSD January 15, 2011 BSD
07-11-2018
